本文档记录了IBM Rational PurifyPlus的安装和许可配置过程。用户需指定安装目录，并接受许可协议。然后，系统会检查并导入许可文件，确保所有必要的Rational产品许可已就绪。安装完成后，用户可以选择启动或检查许可服务器，以验证PurifyPlus的许可设置。
运行脚本license_setup[cnaps2]:/home/cnaps2/PurifyPlus.7.0.1.0-006>./license_setup
按回车继续------------------------------------------------------------------------------
License Setup IBM Corporation Version: 2.198
------------------------------------------------------------------------------
Using License Setup
You are running the license_setup command as cnaps2.
Output from license_setup will be copied to a log file. When you exit
license_setup or license_setup completes, the location of the log file
is displayed.
The -help option can be used to display license_setup command line options.
All of your inputs will be saved for future runs of license_setup.
You can enter a q, q! or ? at any prompt:
q Will save your inputs and quit license_setup.
q! Quit license_setup without saving your inputs.
Note that the 'Rational' directory is always saved.
? Get help on the current prompt.
Press the Enter key to continue, q to quit license_setup:
按回车继续Rational PurifyPlus for Linux and UNIX - Enter Install Location
Enter the location to install IBM Rational products.
This will be referred to as the 'Rational' directory.
In 'Rational' directory, license_setup will create a releases
directory to keep all of the products by name and version.
For example, in 'Rational'/releases, this install will
create a 'PurifyPlus.7.0.1.0-006' directory to install
Rational PurifyPlus for Linux and UNIX 7.0.1.0-006.
The 'Rational' directory must be accessible from
every machine where you plan to run these IBM Rational products.
The 'Rational' directory path must be identical on each machine.
Thus, an automount path like /tmp_mnt/rational should not be used
because you cannot access this directory from every machine.
Checking for 'Rational' directories.. None found.
Press the Enter key to continue, q to quit license_setup:
输入安装将要安装Purify的目录Rational PurifyPlus for Linux and UNIX - Enter Install Location
Enter the location to install IBM Rational products.
This will be referred to as the 'Rational' directory.
In 'Rational' directory, license_setup will create a releases
directory to keep all of the products by name and version.
For example, in 'Rational'/releases, this install will
create a 'PurifyPlus.7.0.1.0-006' directory to install
Rational PurifyPlus for Linux and UNIX 7.0.1.0-006.
The 'Rational' directory must be accessible from
every machine where you plan to run these IBM Rational products.
The 'Rational' directory path must be identical on each machine.
Thus, an automount path like /tmp_mnt/rational should not be used
because you cannot access this directory from every machine.
Checking for 'Rational' directories.. None found.
Press the Enter key to continue, q to quit license_setup:
Enter 'Rational' directory: /home/cnaps2
按1接收许可协议Initializing AIX JRE to display license agreement...
Done.
Please ignore the messages related to 'Could not lock System prefs.'
It is a known issue with the JRE on AIX.
Running LAP Tool:
/home/cnaps2/releases/jre142.aix/jre/bin/java -classpath extras/LAP/lib/lapapp.jar:extras/LAP/lib/i18n.jar:/home/cnaps2/sqllib/java/db2java.zip:/home/cnaps2/sqllib/java/sqlj.zip:/home/cnaps2/sqllib/function:/home/cnaps2/sqllib/java/db2jcc_license_cu.jar:/home/cnaps2/sqllib/tools/clpplus.jar:/home/cnaps2/sqllib/tools/antlr-3.2.jar:/home/cnaps2/sqllib/tools/jline-0.9.93.jar:/home/cnaps2/sqllib/java/db2jcc.jar:. com.ibm.lex.lapapp.LAP -l extras/LAP/LA_files -text_only -s /home/cnaps2/releases/PurifyPlus.7.0.1.0-006
------------------------------------------------------------------------------
重要信息：请仔细阅读
下面提供了两个许可协议。
1. 评估程序的国际许可协议
2. 国际程序许可协议
如果被许可方为了生产性使用目的(而不是为了评估、测试、试用“先试后
买”或演示)获得本程序，单击下面的“接受”按钮即表示被许可方接受
国际程序许可协议，且不作任何修改。
如果被许可方为了评估、测试、试用“先试后买”或演示(统称为“评
估”)目的获得本程序：单击下面的“接受”按钮即表示被许可方同时接受
(i)评估程序的国际许可协议(“评估许可”)，且不作任何修改；和
(ii)国际程序许可协议(“IPLA”)，且不作任何修改。
按 Enter 键继续查看本许可协议或按 "1" 接受本协议，按
"2" 拒绝本协议，按 "3" 打印本协议，按 "5" 用英语查
看，或按 "99" 回到上一屏幕。
1
按1选择Rational PurifyPlus for Linux and UNIXcnaps2 accepts the license agreement on 公元2014年07月31日 星期四 17时25分22秒.
------------------------------------------------------------------------------
Rational PurifyPlus for Linux and UNIX
Product and License Configuration Selection Menu
Make a selection that best describes your desired license set up.
Enter option 1 if you are doing license set up for:
Rational PurifyPlus for Linux and UNIX
Enter option 2 if you are doing license set up for:
Rational Purify/Quantify/PureCoverage
You can only select one item from the list.
These products require FLEXlm licensing. Enter option 'e' to see the
specific FLEXlm licenses for each product.
PurifyPlus or Individual License Configuration:
1) Rational PurifyPlus for Linux and UNIX
2) Rational Purify/Quantify/PureCoverage Individual Licensing
3) License setup only - IBM Rational products
e) Explain what licenses are needed for each product.
d) Download the latest version of the license_setup command from
ftp.software.ibm.com and run it.
b) Back to the previous menu.
q) Quit license_setup. Enter q! to quit without saving your inputs.
?) Help.
Enter option: [e] 1
按2选择设置license文件Enter option: [e] 1
Installing: FLEXlm 11.8 for Solaris SPARC...
from: /home/cnaps2/PurifyPlus.7.0.1.0-006/extras/flexlm.sol
to: /home/cnaps2/base/cots/flexlm.11.8/sun4_solaris2
Installing: FLEXlm 11.8 for Solaris x64...
from: /home/cnaps2/PurifyPlus.7.0.1.0-006/extras/flexlm.solaris_x64
to: /home/cnaps2/base/cots/flexlm.11.8/solaris_x64
Installing: FLEXlm 11.8 for AIX...
from: /home/cnaps2/PurifyPlus.7.0.1.0-006/extras/flexlm.aix
to: /home/cnaps2/base/cots/flexlm.11.8/rs6k_aix
Installing: FLEXlm 11.8 for Linux...
from: /home/cnaps2/PurifyPlus.7.0.1.0-006/extras/flexlm.i386_linux2
to: /home/cnaps2/base/cots/flexlm.11.8/i386_linux2
------------------------------------------------------------------------------
PurifyPlus - Licensing Options Menu
Select one of the following 2 licensing options.
1) Use an existing IBM Rational license file (permanent or temporary) or license
server for PurifyPlus 7.0.1.0-006.
2) Set up a license server using a permanent or term-license-agreement (TLA) license.
You need a .upd license file to import into license_setup.
b) Back to the previous menu.
e) Explain the licensing options in more detail.
q) Quit license_setup. Enter q! to quit without saving your inputs.
Enter license option: [e] 2
输入license文件的路径------------------------------------------------------------------------------
PurifyPlus - Import Licenses
The import file you specify should be from a file you saved from an
e-mail message you received from IBM. This is not the
license file license_setup will set up. It is the license information this
program will import to make decisions about what product(s) you
have licensed and how the licenses should be set up with as a FLEXlm
license server.
The file is called something like license_for_server.upd.
The file must contain FLEXlm SERVER and INCREMENT lines for
PurifyPlus.
Currently, license_setup cannot import a redundant server license file.
If you do not have a .upd file to import licenses from, enter none.
File to import from: [none] /home/cnaps2/PurifyPlus.7.0.1.0-006/IBM.Rational.PurifyPlus.v7.1.lic.eval.upd
选择1检查license文件PurifyPlus - License Check Menu
---> 1) Check license keys in:
/home/cnaps2/PurifyPlus.7.0.1.0-006/IBM.Rational.PurifyPlus.v7.1.lic.eval.upd
Will check for these licenses:
License Feature Description
PurifyPlusUNIX Rational PurifyPlus for UNIX
DevelopmentStudioUNIX Rational Suite DevelopmentStudio for UNIX
DevelopmentStudioUNIXRT Rational Suite DevelopmentStudio RealTime for
UNIX
purecov Rational PureCoverage for UNIX
purify Rational Purify for UNIX
quantify Rational Quantify for UNIX
The license server is not needed for uncounted licenses:
2) No need to start or restart the license server.
3) No need to check license server using lmstat--licenses are uncounted.
4) License settings for PurifyPlus up-to-date.
b) Back to the previous menu.
q) Quit license_setup. Enter q! to quit without saving your inputs.
?) Help.
Enter menu option: [1]
license文件检查通过后按回车继续Will check for these specific licenses:
License Feature Description
PurifyPlusUNIX Rational PurifyPlus for UNIX
DevelopmentStudioUNIX Rational Suite DevelopmentStudio for UNIX
DevelopmentStudioUNIXRT Rational Suite DevelopmentStudio RealTime for
UNIX
purecov Rational PureCoverage for UNIX
purify Rational Purify for UNIX
quantify Rational Quantify for UNIX
Searching for 'ibmratl' specific license keys in:
/home/cnaps2/PurifyPlus.7.0.1.0-006/IBM.Rational.PurifyPlus.v7.1.lic.eval.upd
No ibmratl specific licenses found.
Searching for 'rational' specific license keys...
One rational specific license found.
All 'rational' license keys are okay in:
/home/cnaps2/PurifyPlus.7.0.1.0-006/IBM.Rational.PurifyPlus.v7.1.lic.eval.upd
Searching for 'telelogic' specific license keys...
No telelogic specific licenses found.
Press the Enter key to continue, q to quit license_setup:
按q退出,自此license安装完毕PurifyPlus - License Check Menu
1) Check license keys in:
/home/cnaps2/PurifyPlus.7.0.1.0-006/IBM.Rational.PurifyPlus.v7.1.lic.eval.upd
The license server is not needed for uncounted licenses:
2) No need to start or restart the license server.
3) No need to check license server using lmstat--licenses are uncounted.
4) License settings for PurifyPlus up-to-date.
b) Back to the previous menu.
---> q) Quit license_setup. Enter q! to quit without saving your inputs.
?) Help.
Enter menu option: [q]
扫一扫
3862
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
