signature=6cc55431fbca09c0852b94bb996420eb,Zagadnienia modelowania matematycznego skraplaczy energet...

1. Alcock J.L., Webb D.R.: An experimental investigation of the dynamic behaviour of a shelI-and-tube condenser, Int. J. Heat Mass Transfer, vol. 40, No. 17, 1997, pp. 4129-4135.

2. Andrade E.N. da C.: Maszyny. Mathesis, Polska, Warszawa 1936.

3. Anozie A.N., Odejobi O.J.: The search for optimum condenser cooling water flow rate in a thermal power plant, Applied Thermal Engineering 31, 2011, pp. 4083-4090.

4. Aronson K.E., Ryabchikov A.Y., Brodov Y.M., Murmanskii B.E.: Method for estimating and predicting the residual service life of condenser piping systems in steam-turbine units at thermal powerp plants, Power Technology and Engineering, vol. 44, No. 2, 2010, pp. 146-152.

5. ASME: PTC 12.2-2010 Performance Test Code for Steam Surface Condensers, publ. American Society of Mechanical Engineers, New York, NY 2010.

6. Asrar N., Malik A.U., Ahrnad S., Al-Sheikh A.H.H., Al-Ghambdi F., Al-Thobiety M.: Early failure of cupro-nickel condenser tubes in thermal desalination plant, Desalination 116, 1998, pp. 135-144.

7. Azis P.K.A., Al-Tisan I., Al-Daili M., Grena T.N., Ba-Mardouf K., Al-Qahtanib S.A., Al-Sabaib K.: Marine macrofouling: a review of control technology in the context of an on-line experiment in the turbine condenser water box of Al-Jubail Phase-I power/MSF plants, Desalination 154, 2003, pp. 277-290.

8. Badyda K.: Zagadnienia modelowania matematycznego instalacji energetycznych, Prace Naukowe Mechanika, z. 189, OW Politechniki Warszawskiej, Warszawa 2001.

9. Baehr R., Blangetti F.L., Braun B., Casper W. i in.: Konzeption und Aufbau von Dampkraftwerken, Technischer Verlag Resch, Koln 1985.

10. Berman L.D., Fuks S.N.: Mass Transfer in Condenser With Horizontal Tubes When the Steam Contains Air. Teploenergetica, vol. 5, No. 8, 1958, pp. 66-74.

11. Botsch T.W., Stephan K.: Modelling and simulation of the dynamic behaviour of a shell-and-tube condenser, Int. J. Heat Mass Transfer, vol. 40, No. 17, 1997, pp. 4137-4149.

12. Bott T.R.: Aspects of crystalizactíon fouling, Experimental Thermal and Fluid Science 14, 1997, pp. 356-360.

13. Brodowicz K., Czaplicki A.: Rozwój skraplaczy energetycznych. Energetyka, Nr 6, 1986, s. 199-204.

14. Brodowicz K., Czaplicki A.: Condensing Vapour Flow Resistance Throught Tubes Bundle in the Presence of Condensate on Tubes, 8th Int. Heat Transfere Conf., San Francisco, vol. 4, 1986, 1689-1694.

15. Brodowicz K., Ostrowski K.M., Rusowicz A., Wierzbicki D.: Wpływ lepkości numerycznej na poprawność obliczeń skraplaczy energetycznych. Biuletyn ITC PW, nr 80, 1995, s. 13-27.

16. Brodowicz K., Wierzbicki D.: Ekspertyza pracy skraplacza bloku 50 MW Elektrownia Halemba. Praca ITC, Warszawa 1990.

17. Brodov Yu.M., Nirenshtein M.A., Aronson K.E., Ryabchikov A.Yu.: Characteristics of in-service analysis of condensing heat exchangers in steam-turbine units for their modernization. Power Technology and Engineering, vol. 41, No. 5, 2007, pp. 291-294.

18. Brooks A., Hughes T.: Streamline upwind/Petrow-Galerkin formulations for convection dominated flows with particular ernphasis on the incompressible Navier-Stokes equations - Computer Methods in Aplied Mech. And Eng., 32, 1982, pp. 199-257.

19. Burnside B.M., Cuthbertson G., McNeil D.A.: Pressure drop measurements in condensing steam over a horizontal bundle of staggered tubes, Int. J. Therm. Sci., 40, 2001, pp. 917-926.

20. Bush A.W., Marshall G.S., Wilkinson T.S.: The prediction of steam condensation using a three component solution algorithm, in: Proceedings of the Second Intemational Symposium on Condensers and Condensation, University of Bath, UK, 1990, pp. 223-234.

21. Butrymowicz D., Trela M.: Zagadnienia wpływu zanieczyszczeń i gazów inertnych na wymianę ciepła przy skraplaniu, XI Sympozjum Wymiany Ciepła i Masy, Gliwice-Szczyrk 2001, tom 2, 209-216.

22. Butterworth D.: Innudation without Vapor Shear, Power Condenser Heat Transfer Technology, ed. Mam PT., Nunn R.H., Washington, USA 1981.

23. Butterworth D., Hewitt G.F.: Two-Phase Flow and Heat Transfer, pp. 394-462, Oxford University Press, Oxford, UK, 1977.

24. Can A., Buyruk E., Eryener D.: Exergoeconomic analysis of condenser type heat exchangers, Exergy, an International Journal 2, 2002, pp. 113-118.

25. Carlucci L.: Computations of flow and heat transfer in power plant condenser - Proc. of 8th Int. Heat Transfer Conf., San Francisco, vol. 5, 1986, pp. 2541-2546.

26. Cengel Yunus A.: Heat Transfer: A Practical Approach, McGraw-Hill 1998.

27. Chaudhuri A.R., Seetharamu K.N., Sundararajan T.: Modelling of steam surface condenser using finite element methods, Computations in numerical methods in engineering, vol. 13, 1997, pp. 909-921.

28. Chmielniak T.: Technologie Energetyczne, WNT, Warszawa 2008.

29. Chisholm D., McFarlane M.W.: The prediction of condenser performance using a digital computer, Report No. 161, National Engineering Lab., Glasgow 1964.

30. Chisholm D., Osment B.D.J., McFarlane M.W.: The performance of an experimental condenser, Proc. of 3rd Int. Heat Transfer Conf., Chicago, vol. 1, 1966 pp. 179-185.

31. Czaplicki A., Grabarski A.: Zagadnienia cieplno-przepływowych obliczeń numerycznych skraplaczy energetycznych. Inż. Proc. i Chem. 1991.

32. Ditus F.W., Boelter L.M.K.: Heat transfer in automobile radiators of the tubular type. University of California at Berkeley, Publications in Engineering, 1930, 2, 443-461.

33. Dobosiewicz J.: Wpływ jakości wody zasilającej i kotłowej na trwałość powierzchni ogrzewalnych, Energetyka, nr 7, 2006, s. 517-521.

34. Dokument Referencyjny BAT dla najlepszych dostępnych technik w przemysłowych systemach chłodzenia, Ministerstwo Środowiska, Warszawa, styczeń 2004.

35. Donevski B., Nedelkovski I., Brodowicz K., Ostrowski K.: Numerical Simulation of Flow and Heat Transfer in Power Plant Condensers Applying Two-Phase Model. Proceedings of Intemational Conference on Fluid Engineering, held July 13-16, 1997 in Tokyo, vol. 3, pp. 1707-1711.

36. Drożyński Z.: Phenomenogical model of steam condensation containing non-condensable gases on a single, non-inundated horizontal tube, Arch. of Termodynamics, vol. 27, No. 4, 2006, pp. 67-78.

37. Edgell D., Davidian A.: Modular condenser replacement at ANO-1 solves operating problems and improves performance, PWR, vol. 34, Proceedings of the International Joint Power Generation Conference Editors: S.R. Penfield Jr., R.H. Hayes, R. McMullen, Book No. G011101999.

38. El-Dahshan M.E., Wang L., Shams El Din A.M., Ashoorb B.B.: A new form of titanium condenser tube droplet erosion, Desalination 133, 2001, pp. 149-153.

39. Elsner J .W.: Turbulencja przepływów. PWN, Warszawa 1987.

40. Fujii T., Research Problems For Improving the Performance of Power Plant Condensers, Condensation and Condenser Design, ASME 1993, pp. 487-498.

41. Fujii T., Honda H., Oda K.: Condensation of Steam on Honzontal Tube - the Influence of Oncoming Velocity and Thermal Conduction at the Tube Wall, 18th Natl. Heat Transfer Conf., ASME/AICHE San Diego, USA, 1979, pp. 35-43.

42. Fujii T., Uehara H., Hirata K., Oda K.: Heat transfer and fiow resistance in condensation of low pressure steam flowing through tube banks, Int. Journal Heat Mass Transfer, 15, 1972, pp. 247-259.

43. Gardzilewicz A.: Uwagi do konstrukcji króćców wylotowych turbin parowych. Archiwum Energetyki, Tom XXXI, 2 02, s. 3-26.

44. Groth L.: Kondensat, VEB Deutscher Verlag fur Grundstoffindustrie, Leipzig 1985.

45. Grzebielec A., Rusowicz A.: Analysis of Water Vapour Condensation Conditions in Shell and Tube Condensers. IIR Int. Conference Thermophysical Properties and Transfer Processes of Refrigerants. Vincenza, Italy, 31 Aug.-2 Sept, 2005, pp. 518-520.

46. Grzebielec A., Rusowicz A.: Thermal Resistance of Steam Condensation in Horizontal Tube Bundles, Journal of Power Technologies, vol. 91, No. 1, 2011, pp. 41-48.

47. Haseh Y., Dmcer I., Naterer G.F.: Exergy efficiency of two-phase Flow in a shell and tube condenser, Heat Transfer Engineering, 31(1), 2010, pp. 17-24.

48. Hassan A.A.M.: Analysis of inert gas upon intensivity of condensation in power steam condenser, Rozprawa doktorska, Politechnika Warszawska Wydz. MEiL, Warszawa 1989.

49. HEI Standards for Steam Surface Condensers, 10th ed., Heat Exchange Institute, Cleveland 2006.

50. Hobler T.: Ruch ciepła i wymienniki. WNT Warszawa 1986.

51. Howell A.G., Saxon G.E.: Condenser Tube Fouling and Failures: Cause and Mitigation, Power Plant Chemistry, vol. 7, No. 12, 2005, pp. 708-716.

52. Hu H.G., Zhang C.: A modified k-Ɛ turbulence model for the simulation of two-phase flow and heat transfer in condensers, International Journal of Heat and Mass Transfer, vol. 50, Issues 9-10, May 2007, pp. 1641-1648.

53. Incropera F.P., DeWitt D.P.: Fundamentals of Heat and Mass Transfer, 5th ed., Wiley, New York, 2002, pp. 491-492.

54. Jackowski L.: Wpływ przepływu dwufazowego na warunki wymiany ciepła w skraplaczaczach energetycznych. Rozprawa doktorska, MEiL Politechnika Warszawska, Warszawa 1987.

55. Janikowski D.S: Heat exchanger maintenance: can we afford to wait? Stainless Steel Word, September, vol. 40, 2008, pp. 31-36.

56. Jesionek K.J.: Możliwości poprawy efektywności układu przepływowego turbiny parowej, Prace Naukowe Politechniki Warszawskiej, Seria: Konferencje z. 6, Tom I, Warszawa 1995, s. 219-228.

57. Kaproń H., Salij A.: Doświadczenia eksploatacyjne skraplaczy turbin parowych, X Konferencja PBEC, Prace Naukowe Politechniki Warszawskiej, Seria: Konferencje, z. 27, Warszawa 2011, s. 119-143.

58. Kassem A., Reidy A., Lee R.: Tube vibration in the entrance and exit regions of shell and tube condensers, Condensation and Condenser Design, ASME 1993, pp. 529-542.

59. Kelly D., Nakazawa S., Zienkiewicz O.: A note on upwinding and anisotropic balancing dissipation in finite element aproximations to convective difusion problems, International Journal For Numerical Methods In Engineering, vol. 15, 1980, pp. 1705-1711.

60. Knudsen J.G., Katz D.L.V.: Fluid Dynamics and Heat Transfer, McGraw-Hill, New York, 1958, pp. 394-401.

61. Koch H., Vögele S.: Dynamic modelling of water demand, water availability and adaptatioin strategies for power plants to global change, Ecological Economics, 68, 2009, pp. 2031-2039.

62. Kopczyński O., Laskowski R., Lewandowski J.: Miary diagnostyczne określające wpływ osadów na wymianę ciepła, XII Sympozjum Wymiany Ciepła i Masy, Kraków, 15-18.06.2004, tom I, s. 439-448.

63. Laković M.S., Stojiljković M.M., Laković S.V., Stefanović V.P., Mitrović D.D.: Impact of the cold end operating conditions on energy eificiency of the steam power plants, Thermal Science, Vol. 14, 2010, pp. S53-S66.

64. Laskowski R.M.: A mathematical model of the steam condenser in the changed conditions, Journal of Power Technologies, vol. 92, No. 2, 2012, pp. 101-108.

65. Laskowski R.M.: Opracowanie modeli matematycznych dla określania stanu cieplno-przepływowego turbiny parowej i wymiermika ciepła. Rozprawa doktorska, MEiL Politechnika Warszawska, Warszawa 2007.

66. Laskowski R., Lewandowski J.: Określenie stanu technicznego skraplacza i wymiennika regeneracyjnego, Prace Naukowe PW, seria Konferencje, Konferencja PBEC 2005.

67. Laudyn D., Pawlik M., Strzelczyk F.: Elektrownie, WNT, Warszawa 1997.

68. Leizerovich A.Sh., Leyzerovich A.: Wet-Steam Turbines for Nuclear Power Plants, PENNWELL CORP, 2005.

69. Lewandowski J., Laskowski R., Rusowicz A.: Kondensacja pary wodnej na rurach dochładzacza w skraplaczu energetycznym, Termodynamika w nauce i gospodarce, Tom 2, s. 23-30.

70. Lewińska-Romicka A.: Badania nieniszczące. Podstawy defektoskopii, WNT, Warszawa 2001.

71. Li-hua C., Ting-ting G., Yong L.: Three-dimensional Numerical Simulation of the Outlet Flow Field of the 300 MW Steam Turbine's Condenser Throat, Proceedings of the CSEE, 2006-11.

72. Madejski J.: Teoria wymiany ciepła, Wyd. Uczelniane Politechniki Szczecińskiej, Szczecin 1998.

73. Majewski A.: Komputerowe metody rozwiązywania zagadnień brzegowych, OW PW 1984.

74. Malin M.R.: Modelling flow in an experimental marine condenser. Int. Comm. Heat Transfer, vol. 24, No. 5, 1997, pp. 597-608.

75. McNaught J.M.: Two-Phase F orced Convection Heat-Transfer during Condensation on Horizontal Tube Bundles. Proc. 7th International Heat Transfer Conference, Munich 1982, vol. 5, pp. 125-131.

76. Melo L.F., Bott T.R.: Biofouling in water system, Experimental Thermal and Fluid Science, 14, 1997, pp. 375-381.

77. Miller A.: Maszyny i urządzenia cieplne i energetyczne, WSiP, Warszawa 1998.

78. Murase T., Wang H.S., Rose J.W.: Effect of inundation for condensation of steam on smooth and enhanced condenser tubes, International Journal of Heat and Mass Transfer, 49, 2006, pp. 3180-3189.

79. Nebot E., Casanueva J.F., Casanueva T., Sales D.: Model for fouling deposition on power plant steam condensers cooled with seawater: Effect of water velocity and tube material, International Journal of Heat and Mass Transfer, 50, 2007, pp. 3351-3358.

80. Nedelkovski I., Vilos I., Geramitoioski T.: Finite element solution of Navier-Stokes equations for steam flow and heat transfer, Transactions on Engineering, Computing and Technology, vol. 5, 2005, pp. 171-175.

81. Neil Ch.E.: Entering the Seventh Decade of Electic Power, Edison Electric Institute Bulletin, vol. 10, No. 9, September 1942, pp. 321-333.

82. Nikiel T.: Turbiny parowe, WNT, Warszawa 1989.

83. Nuclear Power Reactors in the World, IAEA, Vienna 2012.

84. Nusselt W.: Die Oberflachen Kondensation des Wasserdampes, Zeitschrift des Vereines Deutscher Ingenieure, vol. 60, No. 2, 1916, pp. 541-546.

85. Orlik V.G., Vainshtein L.L., Averkina N.V., Istomin S.V., Nesterov V.V., Nosovitskii L.A, Ol'shanskii A.P., Popov I.V.: Reduction of Air Inflows in Condensers of 200-Mw Power Units, Power Technology and Engineering, vol. 40, No. 6, 2006, p. 362-364.

86. Orrok G.A.: The Transmission of Heat in Surface Condensation, ASME Trans, vol. 32, 2010, pp. 1139-1214.

87. Ostrowski K.M., Wierzbicki D.: Porównanie wyników eksperymentalnych badań skraplacza w Łaziskach z obliczeniami. Biuletyn ITC PW, nr 82, 1996, s. 43-55.

88. Paska J.: Wytwarzanie energii elektrycznej, OW PW 2005.

89. Patankar S.V., Spalding D.B.: A calculation procedure for the transient and steady-state behavior of shell-and-tube heat exchangers, in: N.H. Afgan, E.U. Schlunder (Eds), Heat Exchangers: Design and Theory Sourcebook, Scripta Book Company, Washington D.C., 1974, pp. 155-176.

90. Parsons Ch.A.: The steam turbine, Cambridge University Press 1911.

91. Prieto M.M., Vallina J .M., Suarez I.M., Martin I.: Application of a design code for estimating fouling on-line in a power plant condenser cooled by seawater, Experimental Thermal and Fluid Science, 25, 2001, pp. 329-336.

92. Prieto M.M., Montanes E., Menendez O.: Power plant condenser performance forecasting using a nonfully connected artificial neural network, Energy 26, 2001, pp. 65-79.

93. Prieto M.M., Suarez I.M., Montanes E.: Analysis of the thermal performance of a church window steam condenser for different operational conditions using three models, Applied Thermal Engineering, No. 23, 2003, pp. 163-178.

94. Putman R.E.: Steam surface condensers: Basic Principles, Performance Monitoring and Maintenance, ASME PRESS, NY 2001.

95. Putman R.E., Harpster J .W.: The measurement of condenser losses due to fouling and those due to air ingress, EPRI Condenser Seminar and Conference, San Antonio, TX, Sept. 10-12, 2002.

96. Qiu-Lin M., Xu H., Zhi-Wen W., Hou F., Lin-Yun X.: Failure analysis and critical manufacturing technology research on titanium condensers, Engineering Failure Analysis, 12, 2005, pp. 432-439.

97. Radzik T., Bieniek J.: Sprawozdanie z cieplnego badania po remoncie i modernizacji turbozespołu nr 3 w Elektrowni Skawina S.A., Energopomiar Gliwice 2004.

98. Raja A.K., Srivast A.P., Dwivedi M.: Power Plant Engineering, New Age International (P) Ltd., Publisher, 2006.

99. Ravigururąjan T.S., Bergles A.E.: Optimization of in-tube enhancement for large evaporators and condensers, Energy, vol. 21, 1996, pp. 421-432.

100. Ramón I.S., González M.P.: Numerical study of the performance of a church window tube bundle condenser. Int. J. Therm. Sci. 2001, 40, pp. 195-204.

101. Rao T.S., Nair K.V.K.: Microbiologically influenced stress corrosion cracking failure of admiralty brass condenser tubes in a nuclear power plant cooled by freshwater, Corrosion Science, vol. 39, No. 11, 1998, pp. 1821-1836.

102. Raznjevic K.: Tablice cieplne z wykresami, WNT, Warszawa 1966.

103. Rhodes D.B., Carlucci L.N.: Predicted and Measured Velocity Distribuctions in a Model Heat Exchangers, Int. Conf. on Numerical Method in Nuclear Engineering, Canadian Nuclear Society/American Nuclear Society, Montreal, 1983, pp. 935-948.

104. Rhodes N., Else K.: Predicting the performance of water and air cooled condensers, Int. J. Pres. Ves. & Piping, 66, 1996, pp. 99-112.

105. Rhodes N., Wilkinson T.S.: The prediction of steam-condenser and turbine-exhaust performance. Second Int. Symposium on Condensers and Condensation, 1990, pp. 185-196.

106. Rose J.W.: Condensation heat transfer, Heat and Mass Transfer 35, 1999, 479-485.

107. Roy R.P., Ratisher M., Gokhale V.K.: A Computational Model of a Power Plant Steam Condenser, Journal of Energy Resources Technology, 2001, vol. 123, pp. 81-91.

108. Rusowicz A.: Analiza powstających osadów w rurach skraplacza energetycznego. XII Sympzjum Wymiany Ciepła i Masy, Kraków, 15-18.06.2004, tom II, s. 753-761.

109. Rusowicz A.: Osady w rurach skraplaczy. Chłodnictwo i Klimatyzacja, nr 3, s. 67-69, Warszawa 2005.

110. Rusowicz A.: Symulacje numeryczne skraplacza energetycznego bloku 50 MW. Archiwum Energetyki, Tom XXXVI, Gdańsk 2006, s. 221-230.

111. Rusowicz A.: Analiza modernizacji skraplacza energetycznego bloku 110 MW. XIII Sympozjum Wymiany Ciepła i Masy. Tom 2, Koszalin-Darłówko 2007, s. 875-882.

112. Rusowicz A.: Modelowanie numeryczne skraplaczy energetycznych. Współczesne technologie i urządzenia energetyczne. Edytor Jan Taler, Polit. Krakowska, Kraków 2007, s. 555-564.

113. Rusowicz A.: Porównanie dwóch konstrukcji skraplaczy energetycznych. Konferencja PBEC, Warszawa 2007, tom 2, s. 481-488.

114. Rusowicz A.: Analiza oporów przepływu w pękach skraplaczy energetycznych, Systems - Journal of Transdisciplinary Systems Science, vol. 13, 2/2, 2008, s. 119-123.

115. Rusowicz A.: Materiały i technologie aparatury procesowej i chłodnictwa, OW PW 2008.

116. Rusowicz A.: The numerical modeling and measurements for power plant condenser, Archiwum Energetyki, tom XL, nr 1, 2010, pp. 3-11.

117. Rusowicz A.: The numerical and experimental study of power plant condenser, Proc. XIIIth Int. Symp. on Heat Transfer and Renewable Sources of Energy HTRSE-2010, Szczecin-Międzyzdroje 2010, pp. 551-558.

118. Rusowicz A.: The numerical modeling and measurements for power plant condenser BICHNIK "Lvivcka politexnika", No. 659, 2009, pp. 3-7.

119. Rusowicz A.: Obliczenia cieplno-przepływowe skraplacza energetycznego TG-1 dla Elektrowni Konin. Raport ITC 2007 (niepublikowany).

120. Rusowicz A.: Rola ukształtowania kanału dolotowego na rozpływ pary w skraplaczu energetycznym, Rynek Energii, nr 5(102), 2012, s. 87-92.

121. Salam B., Mcneil D.A., Burnside B.M.: Pressure drop measurements in a low pressure steam condenser with a horizontal bundle of staggered tubes. App. Thermal Engineering, 24, 2004, pp. 1365-1379.

122. Salij A.: Wpływ jakości i niezawodności układu skraplaczy turbinowych na pracę bloku energetycznego, Rozprawa doktorska, MEiL Politechnika Warszawska, Warszawa 2011.

123. Sarma P.K., Sastry C.V.N., Rao V.D., Kakao S., Liu H.: Convective condensation heat transfer in a horizontal condenser tube, Int. J. Therm. Sci., 41, 2002, pp. 295-301.

124. Saunders E.A.D.: Heat Exchangers: Selection, Design and Construction, NY, U.S.A. Halsted Pr, 1989.

125. Saxon G.E., Putman R.E.: Improved Plant Performance and Reduced CO2 Emission Through, State-of-the-Art Condenser Cleaning And Air In-leakage Detection, Proceedings of International Joint Power Conference, June 16-19, 2003, Atlanta, Georgia, USA, pp. 1-12.

126. Schwartz Mel M.: Encyclopedia of materials, parts, and finishes, CRC Press LLC, 2002.

127. Shackelford J.F., Alexander W.: Materials Science and Engineering Handbook, CRC Press LLC, 2001.

128. Shklover G.G.: Generalized Data of Steam Condensation Computation in Horizontal Tube Bundles, Second Int. Symposium on Condensers and Condensation, 1990, pp. 203-212.

129. Shinzato K., Koyama T., Watanabe Y., Kawabe A., Fujii T.: A simple method for measuring fouling resistance inside a removed condenser tube by radiant heating. Second Int. Symposium on Condensers and Condensation, 1990, pp. 293-302.

130. Słupik T.: Zasady optymalnej pracy skraplaczy i wymienników ciepła, Materiały IV Konferencji Szkoleniowej Zakładu Techniki Cieplnej "Optymalizacja procesów energetycznych – dobra praktyka inżynierska w energetyce i przemyśle", Branisławów, 23-25 kwiecień 2012, s. 37-46.

131. Spencer E.: Specifying Steam Surface Condensers, Heat Exchange Institute, New Jork, vol. 122, 2004.

132. Syed M.Z., Sheikh A.K., Younas M., Budair M.O.: A risk based heat exchanger analysis subject to fouling, Part I: Performance evaluation, Energy, vol. 25, 2000, pp. 427-443.

133. Staniszewski B.: Wymiana ciepła, podstawy teoretyczne, PWN, Warszawa 1979.

134. Stevanović Z., Ilić G., Radojković N., Vukić M., Stefanović V., Vučković G.: Design of shell-and-tube heat exchangers by using CFD technique - part one: thermo-hydraulic calculation, FACTA UNIVERSITATIS, Series: Mechanical Engineering, vol. 1, No. 8, 2001, pp. 1091-1105.

135. Szargut J.: Egzergia. Poradnik obliczania i stosowania, Wyd. Politechniki Śląskiej, Gliwice 2007.

136. Szargut J.: Analiza egzergetyczna procesów cieplnych, Biuletyn ITC PW nr 84, 1996, s. 1-10.

137. Szargut J.: Energia czy egzergia, Rynek Energii, 5(90), 2010, s. 3-5.

138. Szumowski A., Selerowicz W., Piechna J.: Dynamika gazów, skrypt PW, Warszawa 1988.

139. TEMA Standards of the Tubular Exchanger Manufacturers Association, 9th ed., Tarrytown, NY 2007.

140. Todres N.E., Ebeling-Koning D., Robinson J.T.: Hydrodynamics of single and Two-Phase Flow in Inclined Rod Arrays Report No. DOE/ER/12075-4FR, MIT, USA 1985.

141. Wang L., Huang X.H., Lu Z.: Immiscible two-component two-phase gas-liquid heat transfer on shell side of a TEMA-F heat exchanger, Heat and Mass Transfer, 40, 2004, pp. 301-306.

142. Wang H.S, Rose J .W.: Effect of interphase matter transfer on condensation on low-finned tubes - a theoretical investigation, International Journal of Heat and Mass Transfer, 47, 2004, pp. 179-184.

143. Webb D.R.: Multicomponent condensation in a shell and tube condenser - A comprehensive dataset, Experimental Thermal and Fluid Science, 16, 1998, pp. 366-379.

144. Wei L., Zhi Chun L., Ying Shuang W., Su Yi H.: Flow mechanism and heat transfer enhancement in longitudinal-flow tube bundle of shell-and-tube heat exchanger, Sci China Ser E-Tech Sci, 52(10), 2009, pp. 2952-2959.

145. Wiśniewski S.: Wymiana ciepła. PWN, Warszawa 1988.

146. Wróblewski W., Dykas S., Gardzilewicz A., Kolovratnik M.: Numerical and Experimental Investigations of Steam Condensation in LP Part of a Large Power Turbine, Journal of Fluids, Engineering, 2009, vol. 131, pp. 1-11.

147. Vaidya G.A., Gopalakrishnan N., Nerka Y.P.: Reactive power pricing structure for hydroelectric power station in condenser mode operation, Electrical Power and Energy Systems, 33, 2011, pp. 1420-1428.

148. Yau K.K, Pouzenc C.: Computational Modeling of Power Plant Condenser Performance, Heat Transfer, 3rd UK National Conference incorporating 1st European Conference on Thermal Sciences, vol. 1, 1992, pp. 217-224.

149. Zaniankin A.E., Simonow B.P.: Wychłopnyje patrubki parowych i gazowych turbin, Izdatielstwo MEI, Moskwa 2002.

150. Zbroińska-Szczechura E., Dobosiewicz J.: Diagnostyka materiałowa i cieplna skraplaczy, Energetyka nr 3, 2000, s. 122-124.

151. Zhang C.: Numerical Modeling Using a Quasi-Three-Dimensional Procedure for Large Power Plant Condenser, Journal of Heat Transfer, vol. 116, 1994, pp. 180-188.

152. Zhang C.: Local and Overall Condensation Heat Transfer Behavior in Horizontal Tube Bundles, Heat Transfer Engineering, vol. 17, No. 1, 1996, pp. 19-30.

153. Zhang C., Bokil A.: A quasi-three-dimensional approach to simulate the two-phase fluid fiow and heat transfer in condensers. Int. Journal of Heat and Mass Transfer, vol. 40, 1997, No. 15, pp. 3537-3546.

154. Zhang C., Dutcher C., Cooper W., Diab K., Sousa A.C.M., Venart J.E.S.: Measurements and Modelling A 350 MWe Power Plant Condenser, Proc. of the EUROTHERM Seminar No. 18, Hamburg 1991, pp. 341-361.

155. Zhang C., Sousa A.C.M., Venart J .E.S.: The Numerical and Experimental Study of a Power Plant Condenser, Journal of Heat Transfer, vol. 115, 1993, pp. 435-445.

156. Zhang C., Sousa A.C.M., Venart J.E.S.: Numerical Simulation of Difierent Types of Steam Surface Condensers, Journal of Energy Resources Technology, Transactions of the ASME, vol. 113, No. 2, 1991, pp. 63-70.

157. Zhang C., Zhang Y.: Sensitivity Analysis of Heat Transfer Coefficient Correlations on the Predictions of Steam Surface Condensers, Heat Transfer Engineering, vol. 15, No. 2, 1994, pp. 54-63.

158. Zhao B., Liu L., Zhang W.: Optimization of cold end system of steam turbine, Front. Energy Power Eng. china, 2(3), 2008, pp. 348-353.

159. Zembaty W.: Systemy i urządzenia chłodzące elektrowni cieplnych, WNT, Warszawa 1993.

160. Zeng H., Meng J., Li Z.: Numerical study of a power plant condenser tube arrangement, Applied Thermal Engineering, 40, 2012, pp. 294-303.

161. Ziemkiewicz O.: Metoda elementów skończonych, Arkady 1972.