宿主机创建KVM虚拟机

#在宿主机上创建、安装kvm虚拟机

1. 创建镜像文件目录和虚拟磁盘存放目录

mkdir /data/soft
mkdir /data/kvmdisk

2. 创建kvm虚拟机的磁盘文件

qemu-img create -f qcow2 -o preallocation=metadata /data1/kvmdisk/WMS-test-1.img 50G

3.安装虚拟机

#virt-install --name=WMS-test-1 --ram 2048 --vcpus=2 -f /data1/kvmdisk/WMS-test-1.img --cdrom=/data/soft/CentOS-6.5-x86_64-minimal.iso --graphics vnc,listen=0.0.0.0,port=7788 --force --autostart

4.在宿主机上列出创建的kvm虚拟机，手动开启新创建的虚拟机

#virsh list --all
Id Name State
----------------------------------------------------
- WMS-test-1 shut off

#virsh start WMS-test-1
Domain WMS-test-1 started

#virsh list --all Id Name State
`----------------------------------------------------
2 WMS-test-1 running

#配置KVM虚拟机

1. 设置静态IP地址

cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
MACADDR=52:54:00:B7:09:85
TYPE=Ethernet
UUID=2858167d-0b69-48c7-a810-1baee86b1d01
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=172.16.30.31
NETMASK=255.255.254.0
GATEWAY=172.16.30.1

转载于:https://www.cnblogs.com/patrick0715/p/7743457.html