方法一:
GOTO/41.1657, 52.3774, 63.2659
F(P-1)=FEAT/CIRCLE,INNER,CART,72.0000,55.0000,32.0000,0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 70.5004, 54.8725, 53.4950
RMEAS/CIRCLE, F(P-1), 5, FA(CIR1), XDIR, FA(CIR1), YDIR
GOTO/CART, 70.5004, 54.8725, 53.4950
PTMEAS/CART, 67.0180, 54.5763, 32.0000, 0.9964, 0.0847, -0.0000
PTMEAS/CART, 70.8635, 50.1309, 32.0000, 0.2273, 0.9738, -0.0000
PTMEAS/CART, 76.2796, 52.4145, 32.0000, -0.8559, 0.5171, -0.0000
PTMEAS/CART, 75.7815, 58.2712, 32.0000, -0.7563, -0.6542, 0.0000
PTMEAS/CART, 70.0575, 59.6072, 32.0000, 0.3885, -0.9214, -0.0000
ENDMES
GOTO/71.3915, 56.4432, 82.0085
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
- 12.
- 13.
F(P-2)=FEAT/CIRCLE,INNER,CART,56.0000,82.7128,32.0000,0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 56.7606, 81.4142, 53.4950
RMEAS/CIRCLE, F(P-2), 5, FA(CIR1), XDIR, FA(CIR1), YDIR, FA(PLN2), ZDIR
GOTO/CART, 56.7606, 81.4142, 53.4950
PTMEAS/CART, 58.5270, 78.3984, 32.0000, -0.5054, 0.8629, 0.0000
PTMEAS/CART, 60.8842, 83.7829, 32.0000, -0.9768, -0.2140, -0.0000
PTMEAS/CART, 56.4916, 87.6886, 32.0000, -0.0983, -0.9952, 0.0000
PTMEAS/CART, 51.4197, 84.7180, 32.0000, 0.9161, -0.4010, 0.0000
PTMEAS/CART, 52.6776, 78.9763, 32.0000, 0.6645, 0.7473, -0.0000
ENDMES
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
方法二:
轴参考:
测量点的位置会根据参考元素的理论和实际位置的偏差自动调整。向量创建测量也可以使用轴参考模式:
F(P-3)=FEAT/CIRCLE,INNER,CART,24.0000,82.7128,32.0000,-0.0000,-0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 22.4950, 82.7128, 56.4950
RMEAS/CIRCLE, F(P-3), 5, FA(CIR1), XDIR, FA(CIR1), YDIR, FA(PLN2), ZDIR
GOTO/CART, 22.4950, 82.7128, 56.4950
PTMEAS/CART, 19.0000, 82.7128, 32.0000, 1.0000, -0.0000, 0.0000
PTMEAS/CART, 22.4549, 87.4681, 32.0000, 0.3090, -0.9511, 0.0000
PTMEAS/CART, 28.0451, 85.6517, 32.0000, -0.8090, -0.5878, -0.0000
PTMEAS/CART, 28.0451, 79.7739, 32.0000, -0.8090, 0.5878, -0.0000
PTMEAS/CART, 22.4549, 77.9575, 32.0000, 0.3090, 0.9511, 0.0000
GOTO/CART, 23.5349, 81.2816, 56.4950
ENDMES
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
- 12.
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 3
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, FA(PLN2), 20.0000
F(P-4)=FEAT/CIRCLE,INNER,CART,8.0000,55.0000,35.0000,0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 0.0000, 55.0000, 35.0000
RMEAS/CIRCLE, F(P-4), 5, VECBLD, 3.0000, 3, FA(CIR1), XDIR, FA(CIR1), YDIR, FA(PLN2), ZDIR
RPTMEAS/CART, 0.0000, 55.0000, 35.0000, 0.0000, 0.0000, 1.0000
RPTMEAS/CART, 12.0000, 48.0718, 35.0000, 0.0000, 0.0000, 1.0000
RPTMEAS/CART, 12.0000, 61.9282, 35.0000, 0.0000, 0.0000, 1.0000
GOTO/CART, 6.4950, 55.0000, 38.4950
PTMEAS/CART, 3.0000, 55.0000, 32.0000, 1.0000, -0.0000, -0.0000
PTMEAS/CART, 6.4549, 59.7553, 32.0000, 0.3090, -0.9511, 0.0000
PTMEAS/CART, 12.0451, 57.9389, 32.0000, -0.8090, -0.5878, 0.0000
PTMEAS/CART, 12.0451, 52.0611, 32.0000, -0.8090, 0.5878, -0.0000
PTMEAS/CART, 6.4549, 50.2447, 32.0000, 0.3090, 0.9511, -0.0000
ENDMES
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
- 12.
- 13.
- 14.
- 15.
- 16.
- 17.
- 18.
- 19.
方法三:
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, FA(PLN2), 20.0000
F(P-5)=FEAT/CIRCLE,INNER,CART,24.0000,27.2872,32.0000,-0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 7.5296, 53.5651, 56.4931
RMEAS/CIRCLE, F(P-5), 4, FA(CIR1)
GOTO/CART, 7.5296, 53.5651, 56.4931
GOTO/CART, 23.2012, 28.5627, 56.4931
PTMEAS/CART, 21.3461, 31.5248, 32.0000, 0.5308, -0.8475, 0.0000
PTMEAS/CART, 19.7624, 24.6333, 32.0000, 0.8475, 0.5308, -0.0000
PTMEAS/CART, 26.6539, 23.0496, 32.0000, -0.5308, 0.8475, 0.0000
PTMEAS/CART, 28.2376, 29.9410, 32.0000, -0.8475, -0.5308, 0.0000
ENDMES
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
- 12.
- 13.
- 14.
- 15.
- 16.