动态路由协议（2）--rip

1.设置pc ip 网关

192.168.1.1 192.168.1.254

192.168.4.1 192.168.4.254

2.设置路由器

（1）设置接口ip

Router(config-if)#inter f 0/0
Router(config-if)#ip add 192.168.1.254 255.255.255.0
Router(config-if)#inter f 1/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0

Router(config-if)#inter f 0/0
Router(config-if)#ip ad 192.168.2.2 255.255.255.0
Router(config-if)#inter f 1/0
Router(config-if)#ip add 192.168.3.1 255.255.255.0

Router(config-if)#inter f 0/0
Router(config-if)#ip add 192.168.3.2 255.255.255.0
Router(config-if)#inter f 1/0
Router(config-if)#ip add 192.168.4.254 255.255.255.0

（2）配置动态路由

Router(config)#route rip 
Router(config-router)#netw 192.168.1.0 
Router(config-router)#netw 192.168.2.0 

Router(config)#route rip
Router(config-router)#netw 192.168.2.0
Router(config-router)#netw 192.168.3.0

Router(config)#route rip 
Router(config-router)#netw 192.168.3.0
Router(config-router)#netw 192.168.4.0

3.查看路由表

Router#sh ip route
C    192.168.1.0/24 is directly connected, FastEthernet0/0
C    192.168.2.0/24 is directly connected, FastEthernet1/0
R    192.168.3.0/24 [120/1] via 192.168.2.2, 00:00:16, FastEthernet1/0
R    192.168.4.0/24 [120/2] via 192.168.2.2, 00:00:16, FastEthernet1/0

 

转载于:https://www.cnblogs.com/excellencesy/p/8108318.html