Linux查看swap信息,Linux SWAP的查看与维护

1.查看SWAP

[root@www.linuxidc.com /]# cat /proc/swaps

Filename                                Type            Size    Used    Priority

/dev/sdb1                               partition       2096440 8       -1

/tmp/swap                               file            65520   0       -3

2.通过DD创建

boot  etc  initrd  lost+found  misc   opt  root  selinux  sys  test1  usr

[root@www.linuxidc.com /]# dd if=/dev/zero f=/tmp/swap bs=4k count=16382

读入了 16382+0 个块

输出了 16382+0 个块

[root@www.linuxidc.com /]# mkswap /tmp/swap

Setting up swapspace version 1, size = 67096 kB

[root@www.linuxidc.com /]# free

total       used       free     shared    buffers     cached

Mem:        384704     364624      20080          0      17180     305472

-/+ buffers/cache:      41972     342732

Swap:      2096440          8    2096432

swapon [-s]

[root@www.linuxidc.com /]# swapon /tmp/swap

[root@www.linuxidc.com /]# free

total       used       free     shared    buffers     cached

Mem:        384704     364560      20144          0      17196     305456

-/+ buffers/cache:      41908     342796

Swap:      2161960          8    2161952

开机自动启动：

LABEL=/                 /                       ext3    defaults        1 1

LABEL=/home             /home                   ext3    defaults        1 2

LABEL=/var              /var                    ext3    defaults        1 2

LABEL=/tmp              /tmp                    ext3    defaults        1 2

LABEL=/usr              /usr                    ext3    defaults        1 2

LABEL=/boot             /boot                   ext3    defaults        1 2

tmpfs                   /dev/shm                tmpfs   defaults        0 0

devpts                  /dev/pts                devpts  gid=5,mode=620  0 0

sysfs                   /sys                    sysfs   defaults        0 0

proc                    /proc                   proc    defaults        0 0

LABEL=SWAP              swap                    swap    defaults        0 0

/home/swap              swap                    swap    defaults        0 0

3.直接再加一棵硬盘，并且将其中某个扇区规划为 swap 的 filesystem

[root@www.linuxidc.com /]# fdisk /dev/sdc

The number of cylinders for this disk is set to 1044.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): t

Partition number (1-5): 3

Hex code (type L to list codes): L

0  Empty           1e  Hidden W95 FAT1 75  PC/IX           be  Solaris boot

1  FAT12           24  NEC DOS         80  Old Minix       bf  Solaris

2  XENIX root      39  Plan 9          81  Minix / old Lin c1  DRDOS/sec (FAT-

3  XENIX usr       3c  PartitionMagic  82  Linux swap      c4  DRDOS/sec (FAT-

4  FAT16 <32M      40  Venix 80286     83  Linux           c6  DRDOS/sec (FAT-

5  Extended        41  PPC PReP Boot   84  OS/2 hidden C:  c7  Syrinx

6  FAT16           42  SFS             85  Linux extended  da  Non-FS data

7  HPFS/NTFS       4d  QNX4.x          86  NTFS volume set db  CP/M / CTOS / .

8  AIX             4e  QNX4.x 2nd part 87  NTFS volume set de  Dell Utility

9  AIX bootable    4f  QNX4.x 3rd part 8e  Linux LVM       df  BootIt

a  OS/2 Boot Manag 50  OnTrack DM      93  Amoeba          e1  DOS access

b  W95 FAT32       51  OnTrack DM6 Aux 94  Amoeba BBT      e3  DOS R/O

c  W95 FAT32 (LBA) 52  CP/M            9f  BSD/OS          e4  SpeedStor

e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a0  IBM Thinkpad hi eb  BeOS fs

f  W95 Ext'd (LBA) 54  OnTrackDM6      a5  FreeBSD         ee  EFI GPT

10  OPUS            55  EZ-Drive        a6  OpenBSD         ef  EFI (FAT-12/16/

11  Hidden FAT12    56  Golden Bow      a7  NeXTSTEP        f0  Linux/PA-RISC b

12  Compaq diagnost 5c  Priam Edisk     a8  Darwin UFS      f1  SpeedStor

14  Hidden FAT16 <3 61  SpeedStor       a9  NetBSD          f4  SpeedStor

16  Hidden FAT16    63  GNU HURD or Sys ab  Darwin boot     f2  DOS secondary

17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fd  Linux raid auto

18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fe  LANstep

1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid ff  BBT

1c  Hidden W95 FAT3

Hex code (type L to list codes): 82

Changed system type of partition 3 to 82 (Linux swap)

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: 设���或资源忙.

The kernel still uses the old table.

The new table will be used at the next reboot.

Syncing disks.

[root@www.linuxidc.com /]# mkswap /dev/sdc3

Setting up swapspace version 1, size = 329007 kB

[root@www.linuxidc.com /]# swapon /dev/sdc3