linux3.6.7在ok6410平台的移植3,Linux3.6.7在OK6410平台的移植（九）MMC

mach-ok6410.c文件里面增加以下内容：

#include

/* MMC/SD config */

static struct s3c_sdhci_platdata ok6410_hsmmc0_pdata = {

.max_width = 4,

.cd_type = S3C_SDHCI_CD_INTERNAL,

};

static struct s3c_sdhci_platdata ok6410_hsmmc1_pdata = {

.max_width = 4,

.cd_type = S3C_SDHCI_CD_PERMANENT,

};

ok6410_machine_init()函数中添加：

s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);

s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);

内核配置：

系统默认已经有选上MMC/SD驱动选项，所以需要增加的是File systems 内容如下：

编译生成新的uImage,下载到开发板，重启后显示：

.........

yaffs: dev is 32505858 name is "mtdblock2" rw

yaffs: passed flags ""

mmc0: new high speed SD card at address c7b6

mmcblk0: mmc0:c7b6 SD02G 1.83 GiB

mmcblk0:

mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz

VFS: Mounted root (yaffs2 filesystem) on device 31:2.

devtmpfs: mounted the root filesystem.

Freeing init memory: 112K

.........

说明SD卡驱动已经完成，在开发板根目录下新建一个文件夹sdcard,然后挂载

[root@STANzxd /]# mkdir sdcard

[root@STANzxd /]# mount -t vfat /dev/mmcblk0 /sdcard/

[root@STANzxd /]# cd sdcard/

[root@STANzxd /sdcard]# ls

test1.txt

[root@STANzxd /sdcard]# cat test1.txt

this is a test file.