esp8266嵌入html5,Nodemcu+ESP8266实现WEB控制家用电器

#include

// Add wifi access point credentiaals

const char* ssid = "这里填你家WIFI名称";

const char* password = "这里填你家WIFI密码";

WiFiServer server(80);// Set port to 80

String header; // This storees the HTTP request

// Declare the pins to which the LEDs are connected

int inD1 = D1;

int inD2 = D2;

String D1state = "关";// state of green LED

String D2state = "关";// state of red LED

void setup() {

Serial.begin(115200);

// Set the pinmode of the pins to which the LEDs are connected and turn them low to prevent flunctuations

pinMode(inD1, OUTPUT);

pinMode(inD2, OUTPUT);

digitalWrite(inD1, LOW);

digitalWrite(inD2, LOW);

//connect to access point

WiFi.begin(ssid, password);

Serial.print("Connecting to ");

Serial.println(ssid);

while (WiFi.status() != WL_CONNECTED) {

delay(500);

Serial.print(".");

}

// Print local IP address and start web server

Serial.println("");

Serial.println("WiFi connected.");

Serial.println("IP address: ");

Serial.println(WiFi.localIP());// this will display the Ip address of the Pi which should be entered into your browser

server.begin();

}

void loop(){

WiFiClient client = server.available(); // Listen for incoming clients

if (client) { // If a new client connects,

String currentLine = ""; // make a String to hold incoming data from the client

while (client.connected()) { // loop while the client's connected

if (client.available()) { // if there's bytes to read from the client,

char c = client.read(); // read a byte, then

Serial.write(c); // print it out the serial monitor

header += c;

if (c == '\n') { // if the byte is a newline character

// if the current line is blank, you got two newline characters in a row.

// that's the end of the client HTTP request, so send a response:

if (currentLine.length() == 0) {

// HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)

// and a content-type so the client knows what's coming, then a blank line:

client.println("HTTP/1.1 200 OK");

client.println("Content-type:text/html");

client.println("Connection: close");

client.println();

// turns the GPIOs on and off

if (header.indexOf("GET /D1/on") >= 0) {

Serial.println("D1 开");

D1state = "开";

digitalWrite(inD1, HIGH);

} else if (header.indexOf("GET /D1/off") >= 0) {

Serial.println("D1 关");

D1state = "关";

digitalWrite(inD1, LOW);

} else if (header.indexOf("GET /D2/on") >= 0) {

Serial.println("D2 开");

D2state = "开";

digitalWrite(inD2, HIGH);

} else if (header.indexOf("GET /D2/off") >= 0) {

Serial.println("D2 关");

D2state = "关";

digitalWrite(inD2, LOW);

}

// Display the HTML web page

client.println("");

client.println("");

client.println("");

// CSS to style the on/off buttons

// Feel free to change the background-color and font-size attributes to fit your preferences

client.println("");

// Web Page Heading

client.println("

nodemcu 网页测试 BY:southwind QQ:511114355");

// Display current state, and ON/OFF buttons for GPIO 5

client.println("

D1 - 信息 " + D1state + "");

// If the green LED is off, it displays the ON button

if (D1state == "关") {

client.println(");

} else {

client.println(");

}

// Display current state, and ON/OFF buttons for GPIO 4

client.println("

D2 - 信息 " + D2state + "");

// If the red LED is off, it displays the ON button

if (D2state == "关") {

client.println(");

} else {

client.println(");

}

client.println("");

// The HTTP response ends with another blank line

client.println();

// Break out of the while loop

break;

} else { // if you got a newline, then clear currentLine

currentLine = "";

}

} else if (c != '\r') { // if you got anything else but a carriage return character,

currentLine += c; // add it to the end of the currentLine

}

}

}

// Clear the header variable

header = "";

// Close the connection

client.stop();

Serial.println("Client disconnected.");

Serial.println("");

}

}