oracle网卡,Oracle_bond网卡配置

***************************@loyu*************************************

******************双网卡创建bond虚拟网卡实验*************************

cat > /etc/sysconfig/network-scripts/ifcfg-bond0 << Eof

DEVICE=bond0

BOOTPROTO=static

ONBOOT=yes

IPADDR=172.16.116.60

NETMASK=255.255.255.0

GATEWAY=172.16.116.1

DNS1=192.168.21.2

USERCTL=no

BONDING_OPTS="mode=1 miimon=100 primary=eth0"

Eof

********************************************************************

cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << Eof

DEVICE=eth0

TYPE=Ethernet

ONBOOT=yes

NM_CONTROLLED=no

BOOTPROTO=dhcp

USERCTL=no

MASTER=bond0

SLAVE=yes

Eof

********************************************************************

cat > /etc/sysconfig/network-scripts/ifcfg-eth1 << Eof

DEVICE=eth1

TYPE=Ethernet

ONBOOT=yes

NM_CONTROLLED=no

BOOTPROTO=dhcp

USERCTL=no

MASTER=bond0

SLAVE=yes

Eof

********************************************************************

[root@oracle-1 ~]# service NetworkManager stop

Stopping NetworkManager daemon:                            [OK]

********************************************************************

[root@oracle-1 ~]# service network restart

Shutting down interface bond0:                             [  OK  ]

Shutting down loopback interface:                          [  OK  ]

Bringing up loopback interface:                            [  OK  ]

Bringing up interface bond0:  Determining if ip address 192.168.21.24 is already in use for device bond0...

[  OK  ]

本文出自 “流星宇” 博客，谢绝转载！

Oracle_bond网卡配置

标签：oracle_bond网卡配置

本条技术文章来源于互联网，如果无意侵犯您的权益请点击此处反馈版权投诉 本文系统来源：http://8789878.blog.51cto.com/8779878/1770866