51单片机呼吸灯c语言程序,用51单片机的呼吸灯程序

//晶振11.0592

//灯光在单片机控制之下完成由亮到暗的逐渐变化，感觉像是在呼吸

//本例在51hei-5型开发板上实现了一个数码管和一个LED灯一起实现呼吸效果

//文件下载:http://www.51hei.com/f/fxd.rar

#include#define uint unsigned int

#define uchar unsigned char

sbit D1=P0^7;

uchar sr;

uchar jf;

uchar code table[]={

0,1,2,3,4,5,6,7,8,9,10,

11,12,13,14,15,16,17,18,

19,20,21,22,23,24,25,26,27,

28,29,30,31,32,33,34,35,36,

37,38,39,40,41,42,43,44,45,

46,47,48,49};

void light(uchar num);

void delay(uint z);

void main()

{

//设置计数器

//选取计数方式1

TMOD = 0x11;

//给计数器写初值

TH0 = 0;

TL0 = 0;

//操作单片机

//开启CPU中断

EA = 1;

///

//开启定时器T0位中断

ET0 = 1;

//开启计数器

TR0 = 1;

//操作二极管

P1=0;

while(1)

{

if(sr<50)

light(sr);

else sr=0;

}

}

//子函数

void light(uchar num)

{

uchar tme;

D1 = 0;

tme = table[num];

delay(tme);

D1 = 1;

delay(49-tme);

}

//中断函数

void time () interrupt 1

{

//自变量自加

if (jf<2)

{

jf++;

TH0 =0;

TL0 = 0;

}

if (jf==2)

{

//写初值

jf=0;

TH0 = 254;

TL0 = 254;

sr++;

}

}

void delay(uint z)

{

uint x,y;

for(x=10;x>0;x--)

for(y=z;y>0;y--);

}