linux rdma测试,硬件RDMA的驱动配置和测试

author：headsen chen

date： 2019-01-18  10:22:20

notice：created  by headsen chen himself and not allowed to copy, or you will count law question!

版本环境：centos6.8 ，64位，内核：2.6.32

1，配置网卡：

在新卡装上机器，接收光纤，两根线都有接，而且是反接的方式接，接通后，光纤灯会亮

2，安装软件RDMA的方式安装，编译内核和用户态，重启进入新内核4.7

3，安装驱动：

正常的kernel安装方法(2.6的内核)

# /mnt/mlnx-en-4.4-2.0.7.0-rhel6.8-x86_64/install

这里必须采用这种，因为是新内核4.7

#tar fx mlnx-en-4.4-2.0.7.0-rhel6.8-x86_64.tgz#cd mlnx-en-4.4-2.0.7.0-rhel6.8-x86_64#./install --add-kernel-support --skip-repo

Logs dir:/tmp/mlnx-en.28728.logs

General log file:/tmp/mlnx-en.28728.logs/general.log

Verifying KMP rpms compatibility with target kernel...

This program will install the mlnx-en package on your machine.

Note that all other Mellanox, OEM, OFED, RDMAorDistribution IB packages will be removed.

Those packages are removed due to conflicts with mlnx-en, do notreinstall them.

Do you want tocontinue?[y/N]:y

rpm--nosignature -e --allmatches --nodeps rdma rdma

Starting mlnx-en-4.4-2.0.7.0installation ...

Installing mlnx-en-utils 4.4RPM

Preparing...##################################################

mlnx-en-utils ##################################################

Installing kmod-mlnx-en 4.4RPM

Preparing...#############