内部导线拉力测试_线束工程师：Volvo项目的线束PV测试规范

点击图片获取：线束工程师学习资料包 散漫说，线束相关试验分DV和PV两块，即设计验证和产品验证。本文为沃尔沃线束PV测试内容，供大家参考。 PV全称为Product Verification，即产品验证，指从供应商的量产生产线上做出来的零件去做的相关试验验证。PV之后的零件再完成PPAP审核，就具备了量产供货资格了。Volvo汽车线束PV试验内容列表如下：

PN	测试内容	常见的参考标准与要求
1	Compatibility test/兼容性测试	VCC 31832379
2	Water proof of grommet/护套的防水测试	ISO 20653_2013.
3	Water proof of connectors/连接器防水测试	USCAR2, section 5.6.5
4	Crimp check of terminals - pull out force/端子压接拉力测试	USCAR 21, issue 2 for CSA ≤ 8 mm2 or TR 31832374,  issue 7 for CSA > 8 mm2
5	Terminal Crimp Environmental test/端子压接环境测试	USCAR 21, issue 2 for CSA ≤ 8 mm2 or TR 31832374,  issue 7 for CSA > 8 mm2
6	Sealing test for WP terminals/防水连接器的密封实验	TR 31832374, issue 7 section 3.2.2
7	Ultrasonic welded connections/铰接点截面分析	USCAR 38, section 4.1, 4.2, 4.3 and 4.4.
8	Insertion force, terminal - connector housing/连接器插入力测试	TR 01282756 point 3.3.1.1
9	Insertion of terminal into housing with  activated TPA/带TPA连接器插入力测试	TR 01282756 point 3.3.1.2
10	Positioning of TPA or module/锁止力测试	TR 01282756 point 3.3.3
11	Withdrawal force, terminal – housing/连接器拔出力测试	TR 01282756 point 3.3.2
12	Waterproofness test of splice/铰接点防水测试	VCS 7411.17159
13	Pull out force test of splices/铰接点的拉力测试	USCAR 38 section 4.4
14	Peel out force test of splices/铰接点的撕力测试	USCAR 38 section 4.4
15	Axial strain relief test of NWP splices  insulation/非防水铰接点的拉力测试	VCS 7411.17159 point 9 (directed by TR 31804761  point 6.1)
16	Torques and nuts force value on boxes/盒子螺母扭力测试	根据线束客户的要求或规格说明
17	Grommet Pull out Force/护套拉脱力	根据