32 hal stm 读卡器_stm32 SDIO读取SD卡扇区，使用HAL库

/**

******************************************************************************

* File Name          : main.c

* Description        : Main program body

******************************************************************************

*

* COPYRIGHT(c) 2015 STMicroelectronics

*

* Redistribution and use in source and binary forms, with or without modification,

* are permitted provided that the following conditions are met:

*   1. Redistributions of source code must retain the above copyright notice,

*      this list of conditions and the following disclaimer.

*   2. Redistributions in binary form must reproduce the above copyright notice,

*      this list of conditions and the following disclaimer in the documentation

*      and/or other materials provided with the distribution.

*   3. Neither the name of STMicroelectronics nor the names of its contributors

*      may be used to endorse or promote products derived from this software

*      without specific prior written permission.

*

* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

*

******************************************************************************

*/

/* Includes ------------------------------------------------------------------*/

#include "stm32f4xx_hal.h"

#include "sdio.h"

#include "usart.h"

#include "gpio.h"

/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* Private variables ---------------------------------------------------------*/

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/

void SystemClock_Config(void);

/* USER CODE BEGIN PFP */

/* Private function prototypes -----------------------------------------------*/

/* USER CODE END PFP */

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

int main(void)

{

/* USER CODE BEGIN 1 */

uint8_t State = 0;

uint32_t pReadBuffer[128] = { 0 };

uint8_t SendBuffer = { 0 };

uint8_t Char = 0;

/* USER CODE END 1 */

/* MCU Configuration----------------------------------------------------------*/

/* Reset of all peripherals, Initializes the Flash interface and the Systick. */

HAL_Init();

/* Configure the system clock */

SystemClock_Config();

/* Initialize all configured peripherals */

MX_GPIO_Init();

MX_SDIO_SD_Init();

MX_USART1_UART_Init();

/* USER CODE BEGIN 2 */

HAL_UART_Transmit(&huart1, (uint8_t *)"Initializing is OK\n", 19, 500);

/* USER CODE END 2 */

/* Infinite loop */

/* USER CODE BEGIN WHILE */

while (1)

{

/* USER CODE END WHILE */

/* USER CODE BEGIN 3 */

State = HAL_SD_GetStatus(&hsd);

if( State == 0)

{

HAL_UART_Transmit(&huart1, (uint8_t *)"SD Card OK\n", 11, 500);                                                //在这里我们读取SD卡的信息

if(HAL_SD_ReadBlocks(&hsd, pReadBuffer, 0x00000000, 512, 1) == 0)

HAL_UART_Transmit(&huart1, (uint8_t *)"Sector read is OK\n", 18, 500);

else

{

HAL_UART_Transmit(&huart1, (uint8_t *)"ERROR\n", 6, 500);

break;

}

for(int i = 0;i < 128;i++)

{

for(int j = 0;j < 4;j++)

{

SendBuffer = pReadBuffer[i];

pReadBuffer[i] >>= 8;

sprintf((char*)&Char, "%X", SendBuffer);

HAL_UART_Transmit(&huart1, &Char, 1, 500);

}

}

while(1);

}

else if(State == 1)

{

HAL_UART_Transmit(&huart1, (uint8_t *)"Busy\n", 5, 500);

}

else {

HAL_UART_Transmit(&huart1, (uint8_t *)"Error\n", 6, 500);

HAL_SD_Init(&hsd, &SDCardInfo);

}

HAL_Delay(1000);

}

/* USER CODE END 3 */

}

/** System Clock Configuration

*/

void SystemClock_Config(void)

{

RCC_OscInitTypeDef RCC_OscInitStruct;

RCC_ClkInitTypeDef RCC_ClkInitStruct;

__PWR_CLK_ENABLE();

__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;

RCC_OscInitStruct.HSIState = RCC_HSI_ON;

RCC_OscInitStruct.HSICalibrationValue = 16;

RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;

RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;

RCC_OscInitStruct.PLL.PLLM = 8;

RCC_OscInitStruct.PLL.PLLN = 144;

RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;

RCC_OscInitStruct.PLL.PLLQ = 6;

HAL_RCC_OscConfig(&RCC_OscInitStruct);

RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1

|RCC_CLOCKTYPE_PCLK2;

RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;

RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;

RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;

RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;

HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);

HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);

HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);

/* SysTick_IRQn interrupt configuration */

HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);

}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

#ifdef USE_FULL_ASSERT

/**

* @brief Reports the name of the source file and the source line number

* where the assert_param error has occurred.

* @param file: pointer to the source file name

* @param line: assert_param error line source number

* @retval None

*/

void assert_failed(uint8_t* file, uint32_t line)

{

/* USER CODE BEGIN 6 */

/* User can add his own implementation to report the file name and line number,

ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

/* USER CODE END 6 */

}

#endif

/**

* @}

*/

/**

* @}

*/

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/