移动路由器刷linux,Linux小课堂开课了(7)-三线IP刷路由-移动-联通-电信

最近有客户需求，要在服务器上安装centos7

使用三线(移动-联通-电信)，三个网卡分别配置，需要三个IP都可以正常通信，因为三个IP分别有各自的网关，直接配置，只能有一个IP可以正常通信，如此，就需要刷路由，直接将三个IP的网关都配置进去。目前三个IP的网关都是末尾为.1。如下，是刷路由的配置。

1、在/etc/rc.local里面加上

ip route replace default via 101.X.X.X dev em1

ip route replace default via 43.X.X.X dev em2

ip route replace default via 117.X.X.X dev em3

ip route flush table ctc

ip route add default via 101.X.X.1 dev em1 src 101.X.X.X table ctc proto static

ip rule add from 101.X.X.X table ctc

ip route flush table cnc

ip route add default via 43.X.X.1 dev em2 src 43.X.X.X table cnc proto static

ip rule add from 43.X.X.X table cnc

ip route flush table cmcc

ip route add default via 117.X.X.1 dev em3 src 117.X.X.X table cmcc proto static

ip rule add from 117.X.X.X table cmcc

2、在/etc/iproute2/rt_tables 里面加上

252 cmcc

251 cnc

250 ctc

3、在/etc/init.d/networking 加上

ip route replace default via 101.X.X.X dev em1

ip route replace default via 43.X.X.X dev em2

ip route replace default via 117.X.X.X dev em3

ip route flush table ctc

ip route add default via 101.X.X.1 dev em1 src 101.X.X.X table ctc proto static

ip rule add from 101.X.X.X table ctc

ip route flush table cnc

ip route add default via 43.X.X.1 dev em2 src 43.X.X.X table cnc proto static

ip rule add from 43.X.X.X table cnc

ip route flush table cmcc

ip route add default via 117.X.X.1 dev em3 src 117.X.X.X table cmcc proto static

ip rule add from 117.X.X.X table cmcc

4、reboot一下

测试都可以正常通信

未完，待续~