在linux下做RAID1试验-CSDN博客

RAID1试验

---路亚南制作

试验要求：

两块磁盘做raid1
破坏其中一个硬盘（做删除操作）
恢复破坏的磁盘及数据

实现过程：

1.准备linux，配置IP，链接putty
2.查看系统信息

[root@localhost~]# uname -a

Linuxlocalhost.localdomain 2.6.32-358.el6.x86_64 #1 SMP Tue Jan 29 11:47:41 EST 2013x86_64 x86_64 x86_64 GNU/Linux

3.选择两块30G硬盘

4.重启

[root@localhost~]# reboot

5.浏览硬盘

[root@localhost~]# fdisk –l

········下面出现新的硬盘信息

Disk /dev/sdb:32.2 GB, 32212254720 bytes

255 heads, 63sectors/track, 3916 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x00000000

Disk /dev/sdc:32.2 GB, 32212254720 bytes

255 heads, 63sectors/track, 3916 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x00000000

6.建立分区b c

[root@localhost~]# fdisk /dev/sdb

Command (m forhelp): n

Command action

e extended

p primary partition (1-4)

Partitionnumber (1-4): 1

First cylinder(1-3916, default 1):

Using defaultvalue 1

Last cylinder,+cylinders or +size{K,M,G} (1-3916, default 3916):

Using defaultvalue 3916

Command (m forhelp): t

Selectedpartition 1

Hex code (typeL to list codes): fd

Changed systemtype of partition 1 to fd (Linux raid autodetect)

Command (m forhelp): w

The partitiontable has been altered!

Callingioctl() to re-read partition table.

Syncing disks.

建立c分区同上

7.查看sdb1 sdc

[root@localhost~]# fdisk -l /dev/sdb

Disk /dev/sdb:32.2 GB, 32212254720 bytes

255 heads, 63sectors/track, 3916 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0xaf9deeac

Device Boot Start End Blocks Id System

/dev/sdb1 1 3916 31455238+ fd Linux raid autodetect

[root@localhost~]# fdisk -l /dev/sdc

Disk /dev/sdc:32.2 GB, 32212254720 bytes

255 heads, 63sectors/track, 3916 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x8f842ede

Device Boot Start End Blocks Id System

/dev/sdc1 1 3916 31455238+ fd Linux raid autodetect

8. 建立RAID1

[root@localhost~]# mdadm -C /dev/md0 -l 1 -n 2 /dev/sd[bc]1

mdadm: Note:this array has metadata at the start and

may not be suitable as a boot device. If you plan to

store '/boot' on this device please ensurethat

your boot-loader understands md/v1.xmetadata, or use

--metadata=0.90

Continuecreating array? yes

mdadm:Defaulting to version 1.2 metadata

mdadm: array/dev/md0 started.

9.格式化该磁盘阵列

[root@localhost~]# mkfs.ext4 /dev/md0

10.创建data目录

[root@localhost~]# mkdir /data

11.挂载阵列到data目录下

[root@localhost~]# mount /dev/md0 /data

12.查看

[root@localhost~]# ll /data/

total 16

drwx------. 2root root 16384 Aug 15 04:36 lost+found

13.保存分区内容

[root@localhost~]# vi /etc/fstab

14.扫描系统阵列

[root@localhost~]# mdadm -Ds

ARRAY /dev/md0metadata=1.2 name=localhost.localdomain:0UUID=78520035:25e976fe:7411d793:5962601a

15.写入到配置文件

[root@localhost~]# mdadm -Ds >> /etc/mdadm.conf

16.重启查看

[root@localhost~]# reboot

17.查看挂载点

[root@localhost~]# mount

/dev/mapper/VolGroup-lv_rooton / type ext4 (rw)

proc on /proctype proc (rw)

sysfs on /systype sysfs (rw)

devpts on/dev/pts type devpts (rw,gid=5,mode=620)

tmpfs on/dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")

/dev/sda1 on/boot type ext4 (rw)

/dev/md0 on/data type ext4 (rw)

none on/proc/sys/fs/binfmt_misc type binfmt_misc (rw)

18.查看mdstat内容

[root@localhost~]# cat /proc/mdstat

Personalities: [raid1]

md0 : activeraid1 sdc1[1] sdb1[0]

31438720 blocks super 1.2 [2/2] [UU]

unuseddevices: <none>

19.将其中一块30GB Linux6 64 标准模板的克隆-4.vmdkK删除。

20.重启后查看被删除的分区

[root@localhost~]# fdisk -l

Disk /dev/sda:21.5 GB, 21474836480 bytes

255 heads, 63sectors/track, 2610 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x0004106c

Device Boot Start End Blocks Id System

/dev/sda1 * 1 64 512000 83 Linux

Partition 1does not end on cylinder boundary.

/dev/sda2 64 2611 20458496 8e Linux LVM

Disk /dev/sdb:32.2 GB, 32212254720 bytes

255 heads, 63sectors/track, 3916 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0xaf9deeac

Device Boot Start End Blocks Id System

/dev/sdb1 1 3916 31455238+ fd Linux raid autodetect

Disk /dev/sdc:32.2 GB, 32212254720 bytes

255 heads, 63sectors/track, 3916 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x00000000

Disk/dev/mapper/VolGroup-lv_root: 16.8 GB, 16752050176 bytes

255 heads, 63sectors/track, 2036 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x00000000

Disk/dev/mapper/VolGroup-lv_swap: 4194 MB, 4194304000 bytes

255 heads, 63sectors/track, 509 cylinders

Units =cylinders of 16065 * 512 = 8225280 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x00000000

Disk /dev/md0:32.2 GB, 32193249280 bytes

2 heads, 4sectors/track, 7859680 cylinders

Units =cylinders of 8 * 512 = 4096 bytes

Sector size(logical/physical): 512 bytes / 512 bytes

I/O size(minimum/optimal): 512 bytes / 512 bytes

Diskidentifier: 0x00000000

21.raid1重建

模拟恢复，还是添加30GB的硬盘，重复6建立删除的分区c

[root@localhost~]# mdadm /dev/md0 -a /dev/sdc1

mdadm: added/dev/sdc1

22.查看日志

本文转自 yulinshinayiji 51CTO博客，原文链接:http://blog.51cto.com/9281308/1540188