PIX Version 6.3(1)
interface ethernet0 auto 设定端口0 速率为自动
interface ethernet1 100full 设定端口1 速率为100兆全双工
interface ethernet2 auto 设定端口2 速率为自动
nameif ethernet0 outside security0 设定端口0 名称为 outside 安全级别为0
nameif ethernet1 inside security100 设定端口1 名称为 inside 安全级别为100
nameif ethernet2 dmz security50 设定端口2 名称为 dmz 安全级别为50
enable password Dv0yXUGPM3Xt7xVs encrypted 特权密码
passwd 2KFQnbNIdI.2KYOU encrypted 登陆密码
hostname hhyy 设定防火墙名称
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
no fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521    允许用户查看、改变、启用或禁止一个服务或协议通过PIX防火墙，防火墙默认启用了一些常见的端口，但对于ORACLE等专有端口，需要专门启用。names
access-list 101 permit ip 192.168.99.0 255.255.255.0 192.168.170.0 255.255.255.0
access-list 101 permit ip 192.168.12.0 255.255.255.0 192.168.180.0 255.255.255.0
access-list 101 permit ip 192.168.23.0 255.255.255.0 192.168.180.0 255.255.255.0
access-list 101 permit ip 192.168.99.0 255.255.255.0 192.168.101.0 255.255.255.0    建立访问列表，允许特定网段的地址访问某些网段access-list 120 deny icmp 192.168.2.0 255.255.255.0 any
access-list 120 deny icmp 192.168.3.0 255.255.255.0 any
access-list 120 deny icmp 192.168.4.0 255.255.255.0 any
access-list 120 deny icmp 192.168.5.0 255.255.255.0 any
access-list 120 deny icmp 192.168.6.0 255.255.255.0 any
access-list 120 deny icmp 192.168.7.0 255.255.255.0 any
access-list 120 deny icmp 192.168.8.0 255.255.255.0 any
access-list 120 deny icmp 192.168.9.0 255.255.255.0 any
access-list 120 deny icmp 192.168.10.0 255.255.255.0 any
access-list 120 deny icmp 192.168.11.0 255.255.255.0 any
access-list 120 deny icmp 192.168.12.0 255.255.255.0 any
access-list 120 deny icmp 192.168.13.0 255.255.255.0 any
access-list 120 deny icmp 192.168.14.0 255.255.255.0 any
access-list 120 deny icmp 192.168.15.0 255.255.255.0 any
access-list 120 deny icmp 192.168.16.0 255.255.255.0 any
access-list 120 deny icmp 192.168.17.0 255.255.255.0 any
access-list 120 deny icmp 192.168.18.0 255.255.255.0 any
access-list 120 deny icmp 192.168.19.0 255.255.255.0 any
access-list 120 deny icmp 192.168.20.0 255.255.255.0 any
access-list 120 deny icmp 192.168.21.0 255.255.255.0 any
access-list 120 deny icmp 192.168.22.0 255.255.255.0 any
access-list 120 deny udp any any eq netbios-ns
access-list 120 deny udp any any eq netbios-dgm
access-list 120 deny udp any any eq 4444
access-list 120 deny udp any any eq 1205
access-list 120 deny udp any any eq 1209
access-list 120 deny tcp any any eq 445
access-list 120 deny tcp any any range 135 netbios-ssn
access-list 120 permit ip any any    建立访问列表120防止各个不同网段之间的ICMP发包及拒绝135、137等端口之间的通信（主要防止冲击波病毒）access-list 110 permit ip 192.168.99.0 255.255.255.0 192.168.101.0 255.255.255.0pager lines 24
logging on
logging monitor debugging
logging buffered debugging
logging trap notifications
mtu outside 1500
mtu inside 1500
mtu dmz 1500
ip address outside 10.1.1.4 255.255.255.224 设定外端口地址
ip address inside 192.168.1.254 255.255.255.0 设定内端口地址
ip address dmz 192.168.19.1 255.255.255.0 设定DMZ端口地址
ip audit info action alarm
ip audit attack action alarm
ip local pool hhyy 192.168.170.1-192.168.170.254    建立名称为hhyy的地址池，起始地址段为：192.168.170.1-192.168.170.254ip local pool yy 192.168.180.1-192.168.180.254    建立名称为yy 的地址池，起始地址段为：192.168.180.1-192.168.180.254no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
no failover ip address dmz
no pdm history enable
arp timeout 14400    不支持故障切换global (outside) 1 10.1.1.13-10.1.1.28
global (outside) 1 10.1.1.7-10.1.1.9
global (outside) 1 10.1.1.10    定义内部网络地址将要翻译成的全局地址或地址范围nat (inside) 0 access-list 101    使得符合访问列表为101地址不通过翻译，对外部网络是可见的nat (inside) 1 192.168.0.0 255.255.0.0 0 0    内部网络地址翻译成外部地址nat (dmz) 1 192.168.0.0 255.255.0.0 0 0    DMZ区网络地址翻译成外部地址static (inside,outside) 10.1.1.5 192.168.12.100 netmask 255.255.255.255 0 0
static (inside,outside) 10.1.1.12 192.168.12.158 netmask 255.255.255.255 0 0
static (inside,outside) 10.1.1.3 192.168.2.4 netmask 255.255.255.255 0 0    设定固定主机与外网固定IP之间的一对一静态转换static (dmz,outside) 10.1.1.2 192.168.19.2 netmask 255.255.255.255 0 0    设定DMZ区固定主机与外网固定IP之间的一对一静态转换static (inside,dmz) 192.168.0.0 192.168.0.0 netmask 255.255.0.0 0 0    设定内网固定主机与DMZ IP之间的一对一静态转换static (dmz,outside) 10.1.1.29 192.168.19.3 netmask 255.255.255.255 0 0    设定DMZ区固定主机与外网固定IP之间的一对一静态转换access-group 120 in interface outside
access-group 120 in interface inside
access-group 120 in interface dmz    将访问列表应用于端口conduit permit tcp host 10.1.1.2 any
conduit permit tcp host 10.1.1.3 any
conduit permit tcp host 10.1.1.12 any
conduit permit tcp host 10.1.1.29 any    设置管道：允许任何地址对全局地址进行TCP协议的访问conduit permit icmp 192.168.99.0 255.255.255.0 any    设置管道：允许任何地址对192.168.99.0 255.255.255.0地址进行PING测试rip outside passive version 2
rip inside passive version 2
route outside 0.0.0.0 0.0.0.0 10.1.1.1    设定默认路由到电信端route inside 192.168.2.0 255.255.255.0 192.168.1.1 1
route inside 192.168.3.0 255.255.255.0 192.168.1.1 1
route inside 192.168.4.0 255.255.255.0 192.168.1.1 1
route inside 192.168.5.0 255.255.255.0 192.168.1.1 1
route inside 192.168.6.0 255.255.255.0 192.168.1.1 1
route inside 192.168.7.0 255.255.255.0 192.168.1.1 1
route inside 192.168.8.0 255.255.255.0 192.168.1.1 1
route inside 192.168.9.0 255.255.255.0 192.168.1.1 1
route inside 192.168.10.0 255.255.255.0 192.168.1.1 1
route inside 192.168.11.0 255.255.255.0 192.168.1.1 1    设定路由回指到内部的子网timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
service resetinbound
service resetoutside
crypto ipsec transform-set myset esp-des esp-md5-hmac    定义一个名称为myset的交换集crypto dynamic-map dynmap 10 set transform-set myset    根据myset交换集产生名称为dynmap的动态加密图集（可选）crypto map *** 10 ipsec-isakmp dynamic dynmap    将dynmap动态加密图集应用为IPSEC的策略模板（可选）crypto map *** 20 ipsec-isakmp    用IKE来建立IPSEC安全关联以保护由该加密条目指定的数据流crypto map *** 20 match address 110    为加密图指定列表110作为可匹配的列表crypto map *** 20 set peer 10.1.1.41    在加密图条目中指定IPSEC对等体crypto map *** 20 set transform-set myset    指定myset交换集可以被用于加密条目crypto map *** client configuration address initiate    指示PIX防火墙试图为每个对等体设置IP地址crypto map *** client configuration address respond    指示PIX防火墙接受来自任何请求对等体的IP地址请求crypto map *** interface outside    将加密图应用到外部接口isakmp enable outside    在外部接口启用IKE协商isakmp key ******** address 10.1.1.41 netmask 255.255.255.255    指定预共享密钥和远端对等体的地址isakmp identity address    IKE身份设置成接口的IP地址isakmp client configuration address-pool local yy outside
isakmp policy 10 authentication pre-share    指定预共享密钥作为认证手段isakmp policy 10 encryption des    指定56位DES作为将被用于IKE策略的加密算法isakmp policy 10 hash md5    指定MD5 (HMAC变种)作为将被用于IKE策略的散列算法isakmp policy 10 group 2    指定1024比特Diffie-Hellman组将被用于IKE策略isakmp policy 10 lifetime 86400    每个安全关联的生存周期为86400秒（一天）