POJ 3114 Countries in War(强连通)(缩点)(最短路)

                                Countries in War
Time Limit: 1000MS Memory Limit: 65536K
Total Submissions: 3672 Accepted: 1057

Description

In the year 2050, after different attempts of the UN to maintain peace in the world, the third world war broke out. The importance of industrial, commercial and military secrets obliges all the countries to use extremely sophisticated espionage services, so that each city in the world has at least one spy of each country. These spies need to communicate with other spies, informers as well as their headquarters during their actions. Unluckily there doesn’t exist a secure way for a spy to communicate during the war period, therefore the messages are always sent in code so that only the addressee is able to read the message and understand its meaning.

The spies use the only service that functions during the war period, the post. Each city has a postal agency where the letters are sent. The letters can be sent directly to their destination or to other postal agencies, until the letter arrives at the postal agency of the destination city, if possible.

The postal agency in city A can send a printed letter to the postal agency in city B if there is an agreement on sending letters, which determines the time, in hours, that a letter takes to reach city B from city A (and not necessarily the opposite). If there is no agreement between the agencies A and B, the agency A can try to send the letter to any agency so that the letter can reach its destination as early as possible

Some agencies are connected with electronic communication media, such as satellites and optical fibers. Before the war, these connections could reach all the agencies, making that a letter could be sent instantly. But during the period of hostilities every country starts to control electronic communication and an agency can only send a letter to another agency by electronic media (or instantly) if they are in the same country. Two agencies, A and B, are in the same country if a printed letter sent from any one of the agencies can be delivered to the other one.

The espionage service of your country has managed to obtain the content of all the agreements on sending messages existing in the world and desires to find out the minimum time to send a letter between different pairs of cities. Are you capable of helping them?

Input

The input contains several test cases. The first line of each test case contains two integer separated by a space, N (1 ≤ N ≤ 500) and E (0 ≤ EN2), indicating the numbers of cities (numbered from 1 to N) and of agreements on sending messages, respectively. Following them, then, E lines, each containing three integers separated by spaces, X, Y and H (1 ≤ X, YN, 1 ≤ H ≤ 1000), indicating that there exist an agreement to send a printed letter from city X to city Y, and that such a letter will be delivered in H hours.

After that, there will be a line with an integer K (0 ≤ K ≤ 100), the number of queries. Finally, there will be K lines, each representing a query and containing two integers separated by a space, O and D (1 ≤ O, DN). You must determine the minimum time to send a letter from city O to city D.

The end of the input is indicated by N = 0.

Output

For each test case your program should produce K lines of output. The I-th line should contain an integer M, the minimum time, in hours, to send a letter in the I-th query. If there aren’t communication media between the cities of the query, you should print “Nao e possivel entregar a carta” (“It’s impossible to deliver the letter”).

Print a blank line after each test case.

Sample Input

4 5
1 2 5
2 1 10
3 4 8
4 3 7
2 3 6
5
1 2
1 3
1 4
4 3
4 1
3 3
1 2 10
2 3 1
3 2 1
3
1 3
3 1
3 2
0 0

Sample Output

0
6
6
0
Nao e possivel entregar a carta

10
Nao e possivel entregar a carta
0
【分析】给出一些城市之间的有向路,如果两个城市间互相连通,则说明这两个城市属于同一国家,传递邮件不需要时间。不在同一国家则需要时间。
给出一些询问,输出俩城市间的最短路,若不能到达,则输出那句英文。
先用Tarjan缩点,再Spfa.
#include <iostream>
#include <cstring>
#include <cstdio>
#include <cstring>
#include <algorithm>
#include <cmath>
#include <time.h>
#include <string>
#include <map>
#include <stack>
#include <vector>
#include <set>
#include <queue>
#define inf 0x3f3f3f3f
#define mod 10000
typedef long long ll;
using namespace std;
const int N=505;
const int M=250005;
int s,t,n,m,cnt,tim,top,cut;
int head[N],dfn[N],low[N],stack1[N],dis[N];
int num[N],in[N],out[N],vis[N],w[N][N],mp[N][N];

struct man {
    int to,nxt;
} edg[M];
void addedg(int u,int v) {
    edg[cnt].to=v;
    edg[cnt].nxt=head[u];
    head[u]=cnt++;
}
void init() {
    cnt=0;
    tim=1;
    top=cut=0;
    memset(head,-1,sizeof head);
    memset(dfn,0,sizeof dfn);
    memset(low,0,sizeof low);
    memset(stack1,0,sizeof stack1);
    memset(num,0,sizeof num);
    memset(in,0,sizeof in);
    memset(out,0,sizeof out);
    memset(vis,0,sizeof vis);
    memset(edg,0,sizeof edg);
    memset(w,inf,sizeof w);
    memset(mp,inf,sizeof mp);
    memset(dis,inf,sizeof dis);

}
void dfs(int u) {
    int v;
    low[u] = dfn[u] = ++tim;
    stack1[top++] = u;
    vis[u] = 1;
    for(int e = head[u]; e != -1; e = edg[e].nxt) {
        v = edg[e].to;
        if(!dfn[v]) {
            dfs(v);
            low[u] = min(low[u], low[v]);
        } else if(vis[v]) {
            low[u] = min(low[u], dfn[v]);
        }
    }
    if(low[u] == dfn[u]) {
        cut++;//printf("!!!%d\n",u);
        do {
            v = stack1[--top];
            num[v] = cut;
            vis[v] = 0;
        } while(u != v);
    }
}
void Spfa(int s) {
    memset(vis,0,sizeof vis);
    memset(dis,inf,sizeof dis);
    dis[s]=0;
    queue<int>q;
    q.push(s);
    vis[s]=1;
    while(!q.empty()) {
        int t=q.front();
        q.pop();
        vis[t]=0;
        for(int i=1; i<=cut; i++) {
            if(dis[i]>dis[t]+mp[t][i]) {
                dis[i]=dis[t]+mp[t][i];
                if(!vis[i]) {q.push(i);vis[i]=1;}
            }
        }
    }
}
int main() {
    while(~scanf("%d%d",&n,&m)&&n!=0) {
        init();
        int a,b,c;
        for(int i=1; i<=m; i++) {
            scanf("%d%d%d",&a,&b,&c);
            addedg(a,b);
            w[a][b]=min(w[a][b],c);
        }
        for(int i=1; i<=n; i++)if(!dfn[i])dfs(i);
        for(int i=0;i<=n;i++)mp[i][i]=0;
        for(int i=1;i<=n;i++){
            for(int j=1;j<=n;j++){
                if(i!=j&&num[i]!=num[j]&&w[i][j]!=inf)mp[num[i]][num[j]]=min(mp[num[i]][num[j]],w[i][j]);
            }
        }
        int k;
        scanf("%d",&k);
        for(int i=0; i<k; i++) {
            scanf("%d%d",&a,&b);
            if(num[a]==num[b]) {
                puts("0");
            } else {
                Spfa(num[a]);
                if(dis[num[b]]<inf)printf("%d\n",dis[num[b]]);
                else puts("Nao e possivel entregar a carta");
            }
        }
        printf("\n");
    }
    return 0;
}

 

转载于:https://www.cnblogs.com/jianrenfang/p/5897144.html

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
4S店客户管理小程序-毕业设计,基于微信小程序+SSM+MySql开发,源码+数据库+论文答辩+毕业论文+视频演示 社会的发展和科学技术的进步,互联网技术越来越受欢迎。手机也逐渐受到广大人民群众的喜爱,也逐渐进入了每个用户的使用。手机具有便利性,速度快,效率高,成本低等优点。 因此,构建符合自己要求的操作系统是非常有意义的。 本文从管理员、用户的功能要求出发,4S店客户管理系统中的功能模块主要是实现管理员服务端;首页、个人中心、用户管理、门店管理、车展管理、汽车品牌管理、新闻头条管理、预约试驾管理、我的收藏管理、系统管理,用户客户端:首页、车展、新闻头条、我的。门店客户端:首页、车展、新闻头条、我的经过认真细致的研究,精心准备和规划,最后测试成功,系统可以正常使用。分析功能调整与4S店客户管理系统实现的实际需求相结合,讨论了微信开发者技术与后台结合java语言和MySQL数据库开发4S店客户管理系统的使用。 关键字:4S店客户管理系统小程序 微信开发者 Java技术 MySQL数据库 软件的功能: 1、开发实现4S店客户管理系统的整个系统程序; 2、管理员服务端;首页、个人中心、用户管理、门店管理、车展管理、汽车品牌管理、新闻头条管理、预约试驾管理、我的收藏管理、系统管理等。 3、用户客户端:首页、车展、新闻头条、我的 4、门店客户端:首页、车展、新闻头条、我的等相应操作; 5、基础数据管理:实现系统基本信息的添加、修改及删除等操作,并且根据需求进行交流信息的查看及回复相应操作。
现代经济快节奏发展以及不断完善升级的信息化技术,让传统数据信息的管理升级为软件存储,归纳,集中处理数据信息的管理方式。本微信小程序医院挂号预约系统就是在这样的大环境下诞生,其可以帮助管理者在短时间内处理完毕庞大的数据信息,使用这种软件工具可以帮助管理人员提高事务处理效率,达到事半功倍的效果。此微信小程序医院挂号预约系统利用当下成熟完善的SSM框架,使用跨平台的可开发大型商业网站的Java语言,以及最受欢迎的RDBMS应用软件之一的MySQL数据库进行程序开发。微信小程序医院挂号预约系统有管理员,用户两个角色。管理员功能有个人中心,用户管理,医生信息管理,医院信息管理,科室信息管理,预约信息管理,预约取消管理,留言板,系统管理。微信小程序用户可以注册登录,查看医院信息,查看医生信息,查看公告资讯,在科室信息里面进行预约,也可以取消预约。微信小程序医院挂号预约系统的开发根据操作人员需要设计的界面简洁美观,在功能模块布局上跟同类型网站保持一致,程序在实现基本要求功能时,也为数据信息面临的安全问题提供了一些实用的解决方案。可以说该程序在帮助管理者高效率地处理工作事务的同时,也实现了数据信息的整体化,规范化与自动化。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值