This is a test!!!!

When you create a file object in Python you can read from it in several different ways. Not until today did I understand the difference betweenreadline()andreadlines(). The answer is in the name.readline()reads one line character at a time,readlines()reads in the whole file at once and splits it by line.

转载于:https://my.oschina.net/clavin/blog/158596

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
抱歉,我遗漏了发送字符串"This is a UART0 test!"的部分。以下是修改后的代码,包括发送字符串的部分: ```c #include <reg51.h> #include <string.h> #define BUFFER_SIZE 50 unsigned char TX_Buffer[BUFFER_SIZE] = "This is a UART0 test!"; unsigned char RX_Buffer[BUFFER_SIZE]; unsigned char TX_Index = 0; unsigned char RX_Index = 0; void UART_Init() { TMOD |= 0x20; // 设置定时器1为模式2 TH1 = 0xFD; // 设置波特率为9600bps SCON = 0x50; // 设置串口工作在模式1 TR1 = 1; // 启动定时器1 ES = 1; // 开启串口中断 EA = 1; // 开启总中断 } void UART_Send(unsigned char dat) { SBUF = dat; // 将要发送的数据放入 SBUF 寄存器 while (!TI); // 等待数据发送完成 TI = 0; // 清除发送完成标志位 } void UART_Receive() interrupt 4 { if (RI) { RI = 0; // 清除接收中断标志位 RX_Buffer[RX_Index++] = SBUF; // 将接收到的数据放入接收缓冲区 if (RX_Index >= BUFFER_SIZE) { RX_Index = 0; // 接收缓冲区溢出,重置索引 } } } void main() { unsigned char i; UART_Init(); // 初始化串口 for (i = 0; i < strlen(TX_Buffer); i++) { UART_Send(TX_Buffer[i]); // 逐个字符发送字符串 } while (1) { // 主程序中不需要做额外操作 } } ``` 现在,代码将会逐个字符发送字符串"This is a UART0 test!"。每个字符通过 `UART_Send()` 函数发送,并在内部等待数据发送完成。 请确保你已正确设置了 Keil uVision4 的开发环境,并将串口连接到正确的引脚。同时,确保串口助手的波特率与代码中设置的波特率一致。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值