Reason 442: Failed to Enable Virtual Adapter

Problem

When you try to connect with the Cisco *** client in Windows Vista, you receive the following error:

Reason 442: Failed to Enable Virtual Adapter

This error prevents you from connecting with Cisco *** client.

Solution 1

To resolve this problem in Windows Vista, do the following:

1. Click Start > Computer.
2. Double-click your C: drive.
3. Double-click Program Files > Cisco Systems > *** Client.
4. Right-click on c***d.exe and select Properties.
5. Click the Compatibility tab.
6. Put a check mark next to the option, Run this program in compatibility mode for:.
7. Make sure Windows XP Service Pack 2 is selected.
8. Click Apply and then click OK.
9. Right-click ***gui.exe and select Properties.
10. Put a check mark next to the option, Run this program in compatibility mode for:.
11. Make sure Windows XP Service Pack 2 is selected.
12. Click Apply and then click OK.
13. Restart your computer.

After your computer restarts, you may connect with Cisco *** client.

Solution 2 这个问题是由于网络连接开启了“连接共享”引起的，解决方法如下：
1、点击“网络连接"
2、点击 "Cisco Systems *** Adapter 本地连接", 选择共享(Tab),去掉/禁用 Internet 连接共享中的 “允许其它网络用户通过此计算机的 Internet 连接来连接” 项；
3、再检查下其它的几个本地连接的共享选项，将其禁用然后点击你的Cisco *** Client 进行连接； Solution 3 1. start->settings-> network connections
2. for each, sharing tab
3. disable connection sharing