思科<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

华为

H3C

描述

路由部份：

 

 
　

ip route 0.0.0.0 0.0.0.0

ip route-static 0.0.0.0 0.0.0.0

ip route-static 0.0.0.0 0.0.0.0

配置默认路由

ip route 目标网段+掩码 下一跳

ip route-static 目标网段+掩码 下一跳

ip route-static 目标网段+掩码 下一跳

配置静态路由

show ip route

display ip routing-table

display ip routing-table

查看路由表

router rip /network 网段

rip /network 网段

rip /network 网段

启用rip、并宣告网段

router ospf

ospf enable

ospf enable

启用ospf

network ip 反码 area <area-id>

ospf enable area <area-id>

ospf enable area <area-id>

配置OSPF区域

no auto-summary

rip split-horizon

rip split-horizon

配置RIP V2水平分割

show ip protocol

display ip protocol

display ip protocol

查看路由协议

access-list 1-99 permit/deny IP

rule normal permit source IP

rule normal permit source IP

标准访问控制列表

access-list 100-199 permit/deny protocol source IP+ 反码 destination IP+反码 operator operan

rule {normal|special}{permit|deny}{tcp|udp}source {<ip wild>|any}destination <ip wild>|any}[operate]

rule {normal|special}{permit|deny}{tcp|udp}source {<ip wild>|any}destination <ip wild>|any}[operate]

扩展访问控制列表

standby group-number ip virtual-ip

vrrp vrid number virtual-ip

vrrp vrid number virtual-ip

配置HSRP组

standby group-number priority

vrrp vrid number priority

vrrp vrid number priority 

配置HSRP优先级

standby group-number preempt

vrrp vrid number preempt-mode

vrrp vrid number preempt-mode

配置HSRP占先权

standby group-number track

无

无

配置端口跟踪

ip nat inside source static

nat server global <ip> [port] inside <ip> port [protocol]

nat server global <ip> [port] inside <ip> port [protocol]

配置静态地址转换