很少使用oracle的em，最近突然想感受一下，发现原来配置的好好的em，突然无法启动了，重新配置也不行。报错内容如下：

2011-03-16 13:50:28 Thread-69749664 ERROR ssl: nmehlenv_openWallet failed
2011-03-16 13:50:28 Thread-69749664 ERROR http: 16: Error initializing SSL connection for incoming request, aborting request. ret=-1
2011-03-16 13:50:31 Thread-69749664 ERROR ssl: Open wallet failed, ret = 28750
2011-03-16 13:50:31 Thread-69749664 ERROR ssl: nmehlenv_openWallet failed
2011-03-16 13:50:31 Thread-69749664 ERROR http: 16: Unable to initialize ssl connection with server, aborting connection attempt
2011-03-16 13:50:31 Thread-69749664 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://rac1:1158/em/upload/: retStatus=-1
2011-03-16 13:50:31 Thread-69749664 ERROR ssl: Open wallet failed, ret = 28750
2011-03-16 13:50:31 Thread-69749664 ERROR ssl: nmehlenv_openWallet failed
2011-03-16 13:50:31 Thread-69749664 ERROR http: 16: Unable to initialize ssl connection with server, aborting connection attempt
2011-03-16 13:50:31 Thread-69749664 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://rac1:1158/em/upload/: retStatus=-1

在oracle的技术支持网站看到，这是因为oracle的问题引起的。如要影响到的版本为10.2.0.4和10.2.0.5，我的测试数据库刚好是这两个版本。问题的描述和解决方法如下：

Purpose

What is the Issue?

In Enterprise Manager Database Control with Oracle Database 10.2.0.4 and 10.2.0.5, the root certificate used to secure communications via the Secure Socket Layer (SSL) protocol will expire on 31-Dec-2010 00:00:00. The certificate expiration will cause errors if you attempt to configure Database Control on or after 31-Dec-2010. Existing Database Control configurations are not impacted by this issue.

If you plan to configure Database Control with either of these Oracle Database releases, Oracle strongly recommends that you apply Patch 8350262 to your Oracle Home installations before you configure Database Control. Configuration of Database Control is typically done when you create or upgrade Oracle Database, or if you run Enterprise Manager Configuration Assistant (EMCA) in standalone mode.

Note the following:

  • The issue impacts configuration of Database Control with Oracle Database 10.2.0.4 and 10.2.0.5 only. It does not impact database creation or upgrade.
  • The issue does not impact existing Database Control configurations.
  • Application of Patch 8350262 does not require any database downtime

 

Note: If you apply Patch 8350262 to your Oracle Home installations before you configure Database Control, you will not need to follow the recovery steps outlined in this document.

 

Scope and Application

Who is Affected?

If you did not apply Patch 8350262 before configuring Database Control, you will encounter errors during the Database Control configuration process on or after 31-Dec-2010 under the following conditions:

  • When configuring Database Control while installing Oracle Database 10.2.0.4 or 10.2.0.5 using Database Configuration Assistant (DBCA)
  • When configuring Database Control while upgrading to Oracle Database 10.2.0.4 or 10.2.0.5 on a new or existing Oracle Home using Database Upgrade Assistant (DBUA)
  • When configuring or re-configuring Database Control for Oracle Database 10.2.0.4 or 10.2.0.5 on an existing Oracle Home using Database Configuration Assistant (DBCA) or Enterprise Manager Configuration Assistant (EMCA)

What Happens During Database Control Configuration Failure?

Database Configuration Assistant (DBCA) and Database Upgrade Assistant (DBUA) Errors

Database Configuration Assistant (DBCA) and Database Upgrade Assistant (DBUA) will report the followingerror in the console:

Could not complete the Enterprise Manager configuration.
Enterprise manager configuration failed due to the following error –
Error starting Database Control
Enterprise Manager Configuration Assistant (EMCA) Errors

Enterprise Manager Configuration Assistant (EMCA) will write errors similar to those below to the emca.log file:


CONFIG: Securing Database Control completed successfully .
Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the same
CONFIG: Returning env array from cache
Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /myhost/bin/emctl start dbconsole
Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 1
Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://myhost:5501/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control
............................................................................................. failed.
------------------------------------------------------------------
Logs are generated in directory /myhost/sysman/log
Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /myhost/bin/emctl start dbconsole
Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /myhost/dbua/d4/upgrade/emConfig.log for more details.
Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performUpgrade(EMDBPostConfig.java:763)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:232)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:140)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbma.backend.EMConfigStep.executeStepImpl(EMConfigStep.java:104)
at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:175)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
at java.lang.Thread.run(Thread.java:534)

The EMCA console will display output similar to the following:

aime@myhost09 db_1]$ bin/emca -config dbcontrol db -repos recreate -cluster
STARTED EMCA at Jan 11, 2011 4:11:01 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved. 

Enter the following information:
Database unique name: catest
Database Control is already configured for the database catest
You have chosen to configure Database Control for managing the database catest

This will remove the existing configuration and the default settings and perform a fresh configuration
Do you wish to continue? [yes(Y)/no(N)]: Y
Listener port number: 1521
Cluster name: mycluster
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):

........

Jan 11, 2011 4:18:05 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Jan 11, 2011 4:19:31 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Jan 11, 2011 4:28:38 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /myhost/oracle/product/10.2.0/db_1/cfgtoollogs/emca/catest/emca_2011-01-11_
04-11-01-PM.log for more details.
Could not complete the configuration. Refer to the log file at /myhost/oracle/product/10.2.0/db_
1/cfgtoollogs/emca/catest/emca_2011-01-11_04-11-01-PM.log for more details.

Checking the ORACLE_HOME\<hostname>_<SID>\sysman\log\emagent.trc, one can see also:

2011-01-09 09:36:56 Thread-51125136 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://myhost:1158/em/upload/: retStatus=-1
2011-01-09 09:36:56 Thread-51125136 ERROR ssl: Open wallet failed, ret = 28750
2011-01-09 09:36:56 Thread-51125136 ERROR ssl: nmehlenv_openWallet failed
2011-01-09 09:36:56 Thread-51125136 ERROR http: 15: Unable to initialize ssl connection with server, aborting connection attempt

Also, the following errors has been reported in some cases:

2011-01-06 18:50:54 Thread-3393 ERROR ssl: nzos_Initialize failed, ret = 43061
2011-01-06 18:50:54 Thread-3393 ERROR http: 14: Unable to initialize ssl connection with server, aborting connection attempt
2011-01-06 18:50:54 Thread-3393 ERROR pingManager: nmepm_pingReposURL: Cannot connect tohttps://myhost:1158/em/upload/:retStatus=-1

At the end of the database installation on non-Windows platforms, both Database Control and the Management Agent will be up and running, even though the status of both components will be shown as not running, because EMCTL will be unable to connect to the dbconsole process. In addition, Database Control will fail to connect to the Agent.
 

Note for Windows Platform Only:

On Windows, the dbconsole process will be stopped after the failed configuration attempt. Note that the tool used to perform Database Control configuration (DBUA, DBCA or EMCA) will also wait for 15 minutes for Database Control to start, then time out.

The output of the "emctl status dbconsole" command incorrectly returns the status of Database Control, as shown below:

$ ./emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
https://myhost:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.

The output of the "emctl status agent" command incorrectly returns the status of the Agent, as shown
below:

$ ./emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent is Not Running

Recovering from Configuration Errors on a Single Instance Database

1. Ignore any errors and continue with the installation or upgrade. The database will be created without errors.

2. Apply Patch 8350262 to your Oracle Home installation using OPatch.

NOTE: Database instance and the listener DO NOT have to be stopped for applying this patch.

opatch apply

Invoking OPatch 10.2.0.4.2

Oracle Interim Patch Installer version 10.2.0.4.2
Copyright (c) 2007, Oracle Corporation. All rights reserved.

Oracle Home : /myhost
Central Inventory : /scratch/pchebrol/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.4.2
OUI version : 10.2.0.4.0
OUI location : /myhost/oui
Log file location : /myhost/cfgtoollogs/opatch/opatch2011-01-02_11-00-00AM.log

ApplySession applying interim patch '8350262' to OH '/myhost'

Running prerequisite checks...

OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.

Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '8350262' for restore. This might take a while...
Backing up files affected by the patch '8350262' for rollback. This might take a while...

Patching component oracle.sysman.agent.core, 10.2.0.4.0a...
Updating jar file "/myhost/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/fsc/FSWalletUtil.class"
Updating jar file "/myhost/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/rep/RepWalletUtil.class"
Updating jar file "/myhost/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/util/RootCert.class"
Updating jar file "/myhost/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/util/SecConstants.class"
Updating jar file "/myhost/sysman/jlib/emd_java.jar" with "/sysman/jlib/emd_
java.jar/oracle/sysman/eml/sec/fsc/FSWalletUtil.class"
Updating jar file "/myhost/sysman/jlib/emd_java.jar" with "/sysman/jlib/emd_
java.jar/oracle/sysman/eml/sec/rep/RepWalletUtil.class"
Updating jar file "/myhost/sysman/jlib/emd_java.jar" with "/sysman/jlib/emd_
java.jar/oracle/sysman/eml/sec/util/RootCert.class"
Updating jar file "/myhost/sysman/jlib/emd_java.jar" with "/sysman/jlib/emd_
java.jar/oracle/sysman/eml/sec/util/SecConstants.class"
ApplySession adding interim patch '8350262' to inventory

Verifying the update...
Inventory check OK: Patch ID 8350262 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 8350262 are present in Oracle Home.

OPatch succeeded.

3. After applying the patch, force stop the Database Control (dbconsole) process using the killDBConsole script bundled with the patch. Note that the dbconsole process cannot be stopped using the emctl stop dbconsole command, as EMCTL is unable to connect to the process.

To execute the killDBConsole script:

  • Set the ORACLE_HOME and ORACLE_SID environment variables.
  • Execute <PATCH_HOME>/killDBConsole.

Note for Windows Platform Only:

It is not necessary to force stop the dbconsole process on the Windows platform, because the process will
already be in a stopped state at the end of the failed configuration attempt.

The killDBConsole script output is shown below:

$ <PATCH_HOME>/killDBConsole
ORACLE_HOME=/myhost/db_1
ORACLE_SID=caem31
State directory = /myhost/db_1/staxd10_caem31
WatchDog PID = 802932
DBconsole PID = 577716
EMAgent PID = 512156
Killing WatchDog (pid=802932) ...
Successfully killed process 802932
Killing DBConsole (pid=577716) ...
Successfully killed process 577716
Killing EMAgent (pid=512156) ...
Successfully killed process 512156

4. Re-secure Database Control with the following command:

<ORACLE_HOME>/bin/emctl secure dbconsole -reset

You will be prompted twice to confirm that the Root key must be overwritten. In both cases, enter upper-case "Y" as the response. Any other response (including lower-case "y") will cause the command to terminate without completing. If this happens, the command can be re-invoked.

$ ./emctl secure dbconsole -reset
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://myhost:5501/em/console/aboutApplication
Enter Enterprise Manager Root Password :
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Checking Repository... Done.
Checking Em Key... Done.
Checking Repository for an existing Enterprise Manager Root Key...
WARNING! An Enterprise Manager Root Key already exists in
the Repository. This operation will replace your Enterprise
Manager Root Key.
All existing Agents that use HTTPS will need to be
reconfigured if you proceed. Do you wish to continue and
overwrite your Root Key
(Y/N) ?
Y
Are you sure ? Reset of the Enterprise Manager Root Key
will mean that you will need to reconfigure each Agent
that is associated with this OMS before they will be
able to upload any data to it. Monitoring of Targets
associated with these Agents will be unavailable until
after they are reconfigured.
(Y/N) ?
Y
Generating Enterprise Manager Root Key (this takes a minute)... Done.Fetching Root Certificate from
the Repository... Done.
Updating HTTPS port in emoms.properties file... Done.
Generating Java Keystore... Done.
Securing OMS ... Done.
Generating Oracle Wallet Password for Agent.... Done.
Generating wallet for Agent ... Done.
Copying the wallet for agent use... Done.
Storing agent key in repository... Done.
Storing agent key for agent ... Done.
Configuring Agent...
Configuring Agent for HTTPS in DBCONSOLE mode... Done.
EMD_URL set in /myhost/myhost/sysman/config/emd.properties
Done.
Configuring Key store.. Done.
Securing dbconsole... Sucessful.

5. Re-start Database Control with the following command:

<ORACLE_HOME>/bin/emctl start dbconsole

Recovering from Configuration Errors in an Oracle Real Application Clusters (RAC) Environment

1. Ignore any errors and continue with the upgrade, so that the database is upgraded without errors.

2. Apply Patch 8350262 to your Oracle Home installation. Note that the OPatch utility will apply the patch to all nodes in the cluster, as shown below:

../OPatch/opatch apply
Invoking OPatch 10.2.0.4.2 

Oracle Interim Patch Installer version 10.2.0.4.2
Copyright (c) 2007, Oracle Corporation. All rights reserved.

Oracle Home : /myhost/oracle/product/10.2.0/db_1
Central Inventory : /myhost/app/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.4.2
OUI version : 10.2.0.4.0
OUI location : /myhost/oracle/product/10.2.0/db_1/oui
Log file location : /myhost/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/opatch2011-01-01_
21-30-27PM.log

ApplySession applying interim patch '8350262' to OH '/myhost/oracle/product/10.2.0/db_1'

Running prerequisite checks...

OPatch detected the node list and the local node from the inventory. OPatch will patch the local
system then propagate the patch to the remote nodes.

Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '8350262' for restore. This might take a while...
Backing up files affected by the patch '8350262' for rollback. This might take a while...

Patching component oracle.sysman.agent.core, 10.2.0.4.0a...
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emCORE.jar" with
“/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/fsc/FSWalletUtil.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/rep/RepWalletUtil.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/util/RootCert.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emCORE.jar" with
"/sysman/jlib/emCORE.jar/oracle/sysman/eml/sec/util/SecConstants.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emd_java.jar" with
"/sysman/jlib/emd_java.jar/oracle/sysman/eml/sec/fsc/FSWalletUtil.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emd_java.jar" with
"/sysman/jlib/emd_java.jar/oracle/sysman/eml/sec/rep/RepWalletUtil.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emd_java.jar" with
"/sysman/jlib/emd_java.jar/oracle/sysman/eml/sec/util/RootCert.class"
Updating jar file "/myhost/oracle/product/10.2.0/db_1/sysman/jlib/emd_java.jar" with
"/sysman/jlib/emd_java.jar/oracle/sysman/eml/sec/util/SecConstants.class"
ApplySession adding interim patch '8350262' to inventory

Verifying the update...
Inventory check OK: Patch ID 8350262 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 8350262 are present in Oracle Home.

Patching in rolling mode.

Updating nodes 'myhost'
Apply-related files are:
FP = :/myhost/oracle/product/10.2.0/db_1/.patch_storage/8350262_Sep_14_2010_04_59_44/rac/copy_
files.txt"
DP = "/myhost/oracle/product/10.2.0/db_1/.patch_storage/8350262_Sep_14_2010_04_59_44/rac/copy_
dirs.txt"
MP = "/myhost/oracle/product/10.2.0/db_1/.patch_storage/8350262_Sep_14_2010_04_59_44/rac/make_
cmds.txt"
RC = "/myhost/oracle/product/10.2.0/db_1/.patch_storage/8350262_Sep_14_2010_04_59_44/rac/remote_
cmds.txt"

Instantiating the file "/myhost/oracle/product/10.2.0/db_1/.patch_storage/8350262_Sep_14_2010_04_59_
44/rac/copy_files.txt.instantiated" by replacing $ORACLE_HOME in "/myhost/oracle/product/10.2.0/db_
1/.patch_storage/8350262_Sep_14_2010_04_59_44/rac/copy_files.txt" with actual path.
Propagating files to remote nodes...
Instantiating the file "/myhost/oracle/product/10.2.0/db_1/.patch_storage/8350262_Sep_14_2010_04_59_
44/rac/copy_dirs.txt.instantiated" by replacing $ORACLE_HOME in "/myhost/oracle/product/10.2.0/db_
1/.patch_storage/8350262_Sep_14_2010_04_59_44/rac/copy_dirs.txt" with actual path.
Propagating directories to remote nodes...

OPatch succeeded.

3. After applying the patch, force stop the Database Control (dbconsole) process by executing the
killDBConsole script bundled with the patch on each node in the cluster. Note that the dbconsole
process cannot be stopped using the emctl stop dbconsole command, as EMCTL is unable to connect
to the process.

To execute the killDBConsole script:

  • Set the ORACLE_HOME and ORACLE_SID environment variables.
  • Execute <PATCH_HOME>/killDBConsole
Note for Windows Platform Only:
It is not necessary to force stop the dbconsole process on the Windows platform, because the process will
already be in a stopped state at the end of the failed configuration attempt.

The killDBConsole script output is shown below:

$ <PATCH_HOME>/killDBConsole
ORACLE_HOME=/myhost/catest/db_1
ORACLE_SID=caem31
State directory = /myhost/catest/db_1/staxd10_caem31
WatchDog PID = 802932
DBconsole PID = 577716
EMAgent PID = 512156
Killing WatchDog (pid=802932) ...
Successfully killed process 802932
Killing DBConsole (pid=577716) ...
Successfully killed process 577716
Killing EMAgent (pid=512156) ...
Successfully killed process 512156

4. Re-secure Database Control on the first cluster node with the following command:

<ORACLE_HOME>/bin/emctl secure dbconsole -reset

You will be prompted twice to confirm that the Root key must be overwritten. In both cases, enter upper-case "Y" as the response. Any other response (including lower-case "y") will cause the command to terminate without completing. If this happens, the command can be re-invoked.

$ ./emctl secure dbconsole -reset
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://myhost:5501/em/console/aboutApplication
Enter Enterprise Manager Root Password :
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Checking Repository... Done.
Checking Em Key... Done.
Checking Repository for an existing Enterprise Manager Root Key...
WARNING! An Enterprise Manager Root Key already exists in
the Repository. This operation will replace your Enterprise
Manager Root Key.
All existing Agents that use HTTPS will need to be
reconfigured if you proceed. Do you wish to continue and
overwrite your Root Key
(Y/N) ?
Y
Are you sure ? Reset of the Enterprise Manager Root Key
will mean that you will need to reconfigure each Agent
that is associated with this OMS before they will be
able to upload any data to it. Monitoring of Targets
associated with these Agents will be unavailable until
after they are reconfigured.
(Y/N) ?
Y
Generating Enterprise Manager Root Key (this takes a minute)... Done.Fetching Root Certificate from
the Repository... Done.
Updating HTTPS port in emoms.properties file... Done.
Generating Java Keystore... Done.
Securing OMS ... Done.
Generating Oracle Wallet Password for Agent.... Done.
Generating wallet for Agent ... Done.
Copying the wallet for agent use... Done.
Storing agent key in repository... Done.
Storing agent key for agent ... Done.
Configuring Agent...
Configuring Agent for HTTPS in DBCONSOLE mode... Done.
EMD_URL set in /myhost/sysman/config/emd.properties
Done.
Configuring Key store.. Done.
Securing dbconsole... Sucessful. 

 


5. Re-secure Database Control on the remaining cluster nodes with the following command. Note that the -reset switch is not included with this command:

<ORACLE_HOME>/bin/emctl secure dbconsole

 

[myhost bin]$ ./emctl secure dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://myhost:1158/em/console/aboutApplication
Enter Enterprise Manager Root password :
Enter a Hostname for this OMS : myhost
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Checking Repository... Done.
Checking Em Key... Done.
Checking Repository for an existing Enterprise Manager Root Key... Done.
Fetching Root Certificate from the Repository... Done.
Updating HTTPS port in emoms.properties file... Done.
Generating Java Keystore... Done.
Securing OMS ... Done.
Generating Oracle Wallet Password for Agent.... Done.
Generating wallet for Agent ... Done.
Copying the wallet for agent use... Done.
Storing agent key in repository... Done.
Storing agent key for agent ... Done.
Configuring Agent...
Configuring Agent for HTTPS in DBCONSOLE mode... Done.
EMD_URL set in /myhost/oracle/product/10.2.0/db_1/myhost/sysman/c
onfig/emd.properties
Done.
Configuring Key store.. Done.
Securing dbconsole... Sucessful.


6. Re-start Database Control by executing the following command on each node in the cluster:

<ORACLE_HOME>/bin/emctl start dbconsole