两年了，没有再这里写点东西了哈，人都变赖了！

配置的环境，总部USG6550 ,分厂USG63XX

分厂需要访问总部，两个厂都要自己的IP地址

分厂配置：

#

acl number 3000

 rule 5 permit ip source 10.50.0.0 0.0.255.255 destination 10.10.0.0 0.0.255.255

 #

ike proposal 1

 authentication-algorithm sha2-256

 integrity-algorithm hmac-sha2-256

#

ike peer ike13411238449

 exchange-mode aggressive

 pre-shared-key %$%$)NQe=<ET\=[a>ID5+}b+rmd[%$%$

 ike-proposal 1

 remote-id-type none

 remote-address 0.0.0.0（总部的IP地址）

#

ipsec proposal prop13411238449

 encapsulation-mode auto

 esp authentication-algorithm sha2-256

#

ipsec policy ipsec1341123855 1 isakmp

 security acl 3000                        

 ike-peer ike13411238449

 alias feicheng

 proposal prop13411238449

 local-address 0.0.0.0（分厂自己的IP地址）

 sa duration traffic-based 1843200

 sa duration time-based 3600

#

interface GigabitEthernet0/0/1（分厂外网端口）

 ip address 0.0.0.0 255.255.255.128

 ipsec policy ipsec1341123855 auto-neg

#

 ip route-static 10.10.0.0 255.255.0.0 GigabitEthernet0/0/1


－－－－－－－－－－－－－－－－－－－－－－－－－－

总部配置：

acl number 3003

 rule 5 permit ip source 10.10.0.0 0.0.255.255 destination 10.50.0.0 0.0.255.255

#

ike proposal 1

 authentication-algorithm sha2-256

 integrity-algorithm hmac-sha2-256

#

ike peer ike16618495487

 exchange-mode aggressive

 pre-shared-key %$%$CF(_Ci*N+LC)AA7Y.bF!Rd[R%$%$

 ike-proposal 1

 remote-id-type none

 remote-address 0.0.0.0（分厂的IP地址）

#

ipsec proposal prop16618495487

 encapsulation-mode auto

 esp authentication-algorithm sha2-256

#

ipsec policy ipsec1661849541 1 isakmp

 security acl 3003

 ike-peer ike16618495487                  

 alias natfc

 proposal prop16618495487

 local-address 0.0.0.0（总部的IP地址）

 sa duration traffic-based 1843200

 sa duration time-based 3600

#

interface GigabitEthernet1/0/9（总部外网端口）

 ip address 0.0.0.0 255.255.255.252 

 ipsec policy ipsec1661849541 auto-neg

#

ip route-static 10.50.0.0 255.255.0.0 GigabitEthernet1/0/9

（这个静态路由一定要加上哈！！！）



都做好了，在分厂设备上加源地址PING一下总部的一个地址，有的时候PING一下才会通！！