使用kubeadm创建Kubernetes集群

最新推荐文章于 2023-07-06 09:00:00 发布

weixin_33909059

最新推荐文章于 2023-07-06 09:00:00 发布

阅读量213

点赞数

原文链接：https://my.oschina.net/u/2306127/blog/1627651

版权

2019独角兽企业重金招聘Python工程师标准>>>

使用kubeadm创建Kubernetes集群

Using kubeadm to Create a Cluster

kubeadm is a toolkit that helps you bootstrap a best-practice Kubernetes cluster in an easy, reasonably secure and extensible way. It also supports managing Bootstrap Tokens for you and upgrading/downgrading clusters.

kubeadm aims to set up a minimum viable cluster that pass the Kubernetes Conformance tests, but installing other addons than really necessary for a functional cluster is out of scope.

It by design does not install a networking solution for you, which means you have to install a third-party CNI-compliant networking solution yourself using kubectl apply.

kubeadm expects the user to bring a machine to execute on, the type doesn’t matter, can be a Linux laptop, virtual machine, physical/cloud server or Raspberry Pi. This makes kubeadm well suited to integrate with provisioning systems of different kinds (e.g. Terraform, Ansible, etc.).

kubeadm is designed to be a simple way for new users to start trying Kubernetes out, possibly for the first time, a way for existing users to test their application on and stitch together a cluster easily, and also to be a building block in other ecosystem and/or installer tool with a larger scope.

You can install kubeadm very easily on operating systems that support installing deb or rpm packages. The responsible SIG for kubeadm, SIG Cluster Lifecycle, provides these packages pre-built for you, but you may also on other OSes.

kubeadm Maturity

Area	Maturity Level
Command line UX	beta
Implementation	beta
Config file API	alpha
Self-hosting	alpha
kubeadm alpha subcommands	alpha
CoreDNS	alpha
DynamicKubeletConfig	alpha

kubeadm’s overall feature state is Beta and will soon be graduated to General Availability (GA) during 2018. Some sub-features, like self-hosting or the configuration file API are still under active development. The implementation of creating the cluster may change slightly as the tool evolves, but the overall implementation should be pretty stable. Any commands under kubeadm alpha are by definition, supported on an alpha level.

Support timeframes

Kubernetes releases are generally supported for nine months, and during that period a patch release may be issued from the release branch if a severe bug or security issue is found. Here are the latest Kubernetes releases and the support timeframe; which also applies to kubeadm.

Kubernetes version	Release month	End-of-life-month
v1.6.x	March 2017	December 2017
v1.7.x	June 2017	March 2018
v1.8.x	September 2017	June 2018
v1.9.x	December 2017	September 2018

Before you begin

One or more machines running a deb/rpm-compatible OS, e.g. Ubuntu or CentOS
2 GB or more of RAM per machine (any less will leave little room for your apps)
2 CPUs or more on the master
Full network connectivity between all machines in the cluster (public or private network is fine)

Objectives

Install a secure Kubernetes cluster on your machines
Install a Pod network on the cluster so that your Pods can talk to each other

Instructions

(1/4) Installing kubeadm on your hosts

See Installing kubeadm.

Note: If you already have kubeadm installed, you should do a apt-get update && apt-get upgrade or yum update to get the latest version of kubeadm.

The kubelet is now restarting every few seconds, as it waits in a crashloop for kubeadm to tell it what to do. This crashloop is expected and normal, please proceed with the next step and the kubelet will start running normally.

(2/4) Initializing your master

The master is the machine where the control plane components run, including etcd (the cluster database) and the API server (which the kubectl CLI communicates with).

To initialize the master, pick one of the machines you previously installed kubeadm on, and run:

kubeadm init

Notes:

Please refer to the kubeadm reference guide if you want to read more about the flags kubeadm init provides. You can also specify a configuration fileinstead of using flags.
You need to choose a Pod Network Plugin in the next step. Depending on what third-party provider you choose, you might have to set the --pod-network-cidr to something provider-specific. The tabs below will contain a notice about what flags on kubeadm init are required.
Unless otherwise specified, kubeadm uses the default gateway’s network interface to advertise the master’s IP. If you want to use a different network interface, specify --apiserver-advertise-address=<ip-address> argument to kubeadm init. To deploy an IPv6 Kubernetes cluster using IPv6 addressing, you must specify an IPv6, e.g. --apiserver-advertise-address=fd00::101
If you would like to customise control plane components including optional IPv6 assignment to liveness probe for control plane components and etcd server, you can do so by providing extra args to each one, as documented here.
kubeadm init will first run a series of prechecks to ensure that the machine is ready to run Kubernetes. It will expose warnings and exit on errors. It will then download and install the cluster database and control plane components. This may take several minutes.
You can’t run kubeadm init twice without tearing down the cluster in between (unless you’re upgrading from v1.6 to v1.7), see Tear Down.

The output should look like:

[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters.
[init] Using Kubernetes version: v1.8.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks
[kubeadm] WARNING: starting in 1.8, tokens expire after 24 hours by default (if you require a non-expiring token use --token-ttl 0)
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [kubeadm-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.138.0.4]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests"
[init] This often takes around a minute; or longer if the control plane images have to be pulled.
[apiclient] All control plane components are healthy after 39.511972 seconds
[uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[markmaster] Will mark node master as master by adding a label and a taint
[markmaster] Master master tainted and labelled with key/value: node-role.kubernetes.io/master=""
[bootstraptoken] Using token: <token>
[bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: kube-dns
[addons] Applied essential addon: kube-proxy

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run (as a regular user):

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  http://kubernetes.io/docs/admin/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join --token <token> <master-ip>:<master-port> --discovery-token-ca-cert-hash sha256:<hash>

To make kubectl work for your non-root user, you might want to run these commands (which is also a part of the kubeadm init output):

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you could run this:

export KUBECONFIG=/etc/kubernetes/admin.conf

Make a record of the kubeadm join command that kubeadm init outputs. You will need this in a moment.

The token is used for mutual authentication between the master and the joining nodes. The token included here is secret, keep it safe as anyone with this token can add authenticated nodes to your cluster. These tokens can be listed, created and deleted with the kubeadm token command. See thereference guide for more details.

(3/4) Installing a pod network

You MUST install a pod network add-on so that your pods can communicate with each other.

The network must be deployed before any applications. Also, kube-dns, an internal helper service, will not start up before a network is installed. kubeadm only supports Container Network Interface (CNI) based networks (and does not support kubenet).

Several projects provide Kubernetes pod networks using CNI, some of which also support Network Policy. See the add-ons page for a complete list of available network add-ons. IPv6 support was added in CNI v0.6.0. CNI bridge and local-ipam are the only supported IPv6 network plugins in 1.9.

Note: kubeadm sets up a more secure cluster by default and enforces use of RBAC. Please make sure that the network manifest of choice supports RBAC.

You can install a pod network add-on with the following command:

kubectl apply -f <add-on.yaml>

NOTE: You can install only one pod network per cluster.

Please select one of the tabs to see installation instructions for the respective third-party Pod Network Provider.

Refer to the Calico documentation for a kubeadm quickstart, a kubeadm installation guide, and other resources.

Note:

In order for Network Policy to work correctly, you need to pass --pod-network-cidr=192.168.0.0/16 to kubeadm init.
Calico works on amd64 only.

kubectl apply -f https://docs.projectcalico.org/v3.0/getting-started/kubernetes/installation/hosted/kubeadm/1.7/calico.yaml

The official Canal set-up guide is here.

Note:

For Canal to work correctly, --pod-network-cidr=10.244.0.0/16 has to be passed to kubeadm init.
Canal works on amd64 only.

kubectl apply -f https://raw.githubusercontent.com/projectcalico/canal/master/k8s-install/1.7/rbac.yaml
kubectl apply -f https://raw.githubusercontent.com/projectcalico/canal/master/k8s-install/1.7/canal.yaml

Note:

For flannel to work correctly, --pod-network-cidr=10.244.0.0/16 has to be passed to kubeadm init.
flannel works on amd64, arm, arm64 and ppc64le, but for it to work on a platform other than amd64 you have to manually download the manifest and replace amd64 occurrences with your chosen platform.
Set /proc/sys/net/bridge/bridge-nf-call-iptables to 1 by running sysctl net.bridge.bridge-nf-call-iptables=1 to pass bridged IPv4 traffic to iptables’ chains. This is a requirement for some CNI plugins to work, for more information please see here.

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/v0.9.1/Documentation/kube-flannel.yml

For more information about flannel, please see here.

Set /proc/sys/net/bridge/bridge-nf-call-iptables to 1 by running sysctl net.bridge.bridge-nf-call-iptables=1 to pass bridged IPv4 traffic to iptables’ chains. This is a requirement for some CNI plugins to work, for more information please see here.

Kube-router relies on kube-controller-manager to allocate pod CIDR for the nodes. Therefore, use kubeadm init with the --pod-network-cidr flag.

Kube-router provides pod networking, network policy, and high-performing IP Virtual Server(IPVS)/Linux Virtual Server(LVS) based service proxy.

For information on setting up Kubernetes cluster with Kube-router using kubeadm, please see official setup guide.

The official Romana set-up guide is here.

Note: Romana works on amd64 only.

kubectl apply -f https://raw.githubusercontent.com/romana/romana/master/containerize/specs/romana-kubeadm.yml

The official Weave Net set-up guide is here.

Note: Weave Net works on amd64, arm, arm64 and ppc64le without any extra action required. Weave Net sets hairpin mode by default. This allows Pods to access themselves via their Service IP address if they don’t know their PodIP.

export kubever=$(kubectl version | base64 | tr -d '\n')
kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$kubever"

Once a pod network has been installed, you can confirm that it is working by checking that the kube-dns pod is Running in the output of kubectl get pods --all-namespaces. And once the kube-dns pod is up and running, you can continue by joining your nodes.

If your network is not working or kube-dns is not in the Running state, check out our troubleshooting docs.

Master Isolation

By default, your cluster will not schedule pods on the master for security reasons. If you want to be able to schedule pods on the master, e.g. for a single-machine Kubernetes cluster for development, run:

kubectl taint nodes --all node-role.kubernetes.io/master-

With output looking something like:

node "test-01" untainted
taint key="dedicated" and effect="" not found.
taint key="dedicated" and effect="" not found.

This will remove the node-role.kubernetes.io/master taint from any nodes that have it, including the master node, meaning that the scheduler will then be able to schedule pods everywhere.

(4/4) Joining your nodes

The nodes are where your workloads (containers and pods, etc) run. To add new nodes to your cluster do the following for each machine:

SSH to the machine
Become root (e.g. sudo su -)
Run the command that was output by kubeadm init. For example:

kubeadm join --token <token> <master-ip>:<master-port> --discovery-token-ca-cert-hash sha256:<hash>

Note: To specify an IPv6 tuple for <master-ip>:<master-port>, IPv6 address must be enclosed in square brackets, for example: [fd00::101]:2073.

The output should look something like:

[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters.
[preflight] Running pre-flight checks
[discovery] Trying to connect to API Server "10.138.0.4:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://10.138.0.4:6443"
[discovery] Requesting info from "https://10.138.0.4:6443" again to validate TLS against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "10.138.0.4:6443"
[discovery] Successfully established connection with API Server "10.138.0.4:6443"
[bootstrap] Detected server version: v1.8.0
[bootstrap] The server supports the Certificates API (certificates.k8s.io/v1beta1)
[csr] Created API client to obtain unique certificate for this node, generating keys and certificate signing request
[csr] Received signed certificate from the API server, generating KubeConfig...

Node join complete:
* Certificate signing request sent to master and response
  received.
* Kubelet informed of new secure connection details.

Run 'kubectl get nodes' on the master to see this machine join.

A few seconds later, you should notice this node in the output from kubectl get nodes when run on the master.

(Optional) Controlling your cluster from machines other than the master

In order to get a kubectl on some other computer (e.g. laptop) to talk to your cluster, you need to copy the administrator kubeconfig file from your master to your workstation like this:

scp root@<master ip>:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf get nodes

Note:

The example above assumes SSH access is enabled for root. If that is not the case, you can copy the admin.conf file to be accessible by some other user and scp using that other user instead.
The admin.conf file gives the user superuser privileges over the cluster. This file should be used sparsingly. For normal users, it’s recommended to generate an unique credential to which you whitelist privileges. You can do this with the kubeadm alpha phase kubeconfig user --client-name <CN> command. That command will print out a KubeConfig file to STDOUT which you should save to a file and distribute to your user. After that, whitelist privileges by using kubectl create (cluster)rolebinding.

(Optional) Proxying API Server to localhost

If you want to connect to the API Server from outside the cluster you can use kubectl proxy:

scp root@<master ip>:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf proxy

You can now access the API Server locally at http://localhost:8001/api/v1

Tear down

To undo what kubeadm did, you should first drain the node and make sure that the node is empty before shutting it down.

Talking to the master with the appropriate credentials, run:

kubectl drain <node name> --delete-local-data --force --ignore-daemonsets
kubectl delete node <node name>

Then, on the node being removed, reset all kubeadm installed state:

kubeadm reset

If you wish to start over simply run kubeadm init or kubeadm join with the appropriate arguments.

More options and information about the kubeadm reset command.

Upgrading a kubeadm cluster

Instructions for upgrading kubeadm clusters are available for:

Explore other add-ons

See the list of add-ons to explore other add-ons, including tools for logging, monitoring, network policy, visualization & control of your Kubernetes cluster.

What’s next

Learn about kubeadm’s advanced usage in the kubeadm reference documentation
Learn more about Kubernetes concepts and kubectl.
Configure log rotation. You can use logrotate for that. When using Docker, you can specify log rotation options for Docker daemon, for example --log-driver=json-file --log-opt=max-size=10m --log-opt=max-file=5. See Configure and troubleshoot the Docker daemon for more details.

Feedback

kubeadm support Slack Channel: #kubeadm
General SIG Cluster Lifecycle Development Slack Channel: #sig-cluster-lifecycle
SIG Cluster Lifecycle SIG information
SIG Cluster Lifecycle Mailing List: kubernetes-sig-cluster-lifecycle
kubeadm Github issue tracker

Version skew policy

The kubeadm CLI tool of version vX.Y may deploy clusters with a control plane of version vX.Y or vX.(Y-1). kubeadm CLI vX.Y can also upgrade an existing kubeadm-created cluster of version vX.(Y-1).

Due to that we can’t see into the future, kubeadm CLI vX.Y may or may not be able to deploy vX.(Y+1) clusters.

Example: kubeadm v1.8 can deploy both v1.7 and v1.8 clusters and upgrade v1.7 kubeadm-created clusters to v1.8.

Please also check our installation guide for more information on the version skew between kubelets and the control plane.

kubeadm works on multiple platforms

kubeadm deb/rpm packages and binaries are built for amd64, arm (32-bit), arm64, ppc64le, and s390x following the multi-platform proposal.

Only some of the network providers offer solutions for all platforms. Please consult the list of network providers above or the documentation from each provider to figure out whether the provider supports your chosen platform.

Limitations

Please note: kubeadm is a work in progress and these limitations will be addressed in due course.

The cluster created here has a single master, with a single etcd database running on it. This means that if the master fails, your cluster may lose data and may need to be recreated from scratch. Adding HA support (multiple etcd servers, multiple API servers, etc) to kubeadm is still a work-in-progress.

Workaround: regularly back up etcd. The etcd data directory configured by kubeadm is at /var/lib/etcd on the master.