【vivado】ILA调试报错 The debug hub core was not detected 以及 Data read from hw_ila [hw_ila_1] is corrupted...

最新推荐文章于 2024-09-10 11:24:45 发布

weixin_33909059

最新推荐文章于 2024-09-10 11:24:45 发布

阅读量2.7w

点赞数 22

文章标签：嵌入式

原文链接：http://www.cnblogs.com/kevinchase/p/7494865.html

版权

本文详细分析了在Vivado中调试ILA（Integrated Logic Analyzer）时遇到的两个常见错误：1) The debug hub core was not detected警告，以及2) Data read from hw_ila is corrupted错误。问题根源在于ILA、debug hub与JTAG时钟频率不匹配。解决方案包括调整JTAG仿真器频率和改变debug hub的时钟源。

摘要由CSDN通过智能技术生成

报错一：

WARNING: [Labtools 27-3361] The debug hub core was not detected.

Resolution:

1. Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock and is active.

2. Make sure the BSCAN_SWITCH_USER_MASK device property in Vivado Hardware Manager reflects the user scan chain setting in the design and refresh the device. To determine the user scan chain setting in the design, open the implemented design and use 'get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub]'.

For more details on setting the scan chain property, consult the Vivado Debug and Programming User Guide (UG908).

WARNING: [Labtools 27-1974] Mismatch between the design programmed into the device xc7z020_1 and the probes file(s) E:/fpga/mt100_v2/nand_x8/v2/mt100_v2/mt100_v2.runs/impl_1/mt100_v2_wrapper.ltx.

The device design has 0 ILA core(s) and 0 VIO core(s). The probes file(s) have 3 ILA core