Netapp FCP 配置
headb> fcp start
fcp: No FCP Target Adapters are present in this system.
headb> fcp config
fcp: No FCP Target Adapters are present in this system.
以上错误说明 fcmode 不正确，要用target模式，使用下列方法修改
headb> fcadmin config
                  Local  
Adapter Type      State                  Status
---------------------------------------------------
  0a   initiator  CONFIGURED.            offline
  0b   initiator  CONFIGURED.            Offline
 
headb > fcadmin config -d 0a

Mon Sep 19 15 : 59 : 38 CEST [ headb: fci.adapter.offlining:info ] : Offlining Fibre Channel adapter 0a.

Mon Sep 19 15 : 59 : 38 CEST [ headb: fci.adapter.offline:info ] : Fibre Channel adapter 0a is now offline.

 

headb > fcadmin config -t target 0a

Mon Sep 19 15 : 59 : 54 CEST [ headb: fci.config.state:info ] : Fibre channel initiator adapter 0a is in the PENDING ( target ) state.

A reboot is required for the new adapter configuration to take effect.

headb >

headb > fcadmin config -d 0b

Mon Sep 19 16 :00:00 CEST [ headb: fci.adapter.offlining:info ] : Offlining Fibre Channel adapter 0b.

Mon Sep 19 16 :00:01 CEST [ headb: fci.adapter.offline:info ] : Fibre Channel adapter 0b is now offline.

 

headb > fcadmin config -t target 0b

Mon Sep 19 16 :00: 40 CEST [ headb: fci.config.state:info ] : Fibre channel initiator adapter 0b is in the PENDING ( target ) state.

A reboot is required for the new adapter configuration to take effect.

headb > fcadmin config            

 

                  Local  

Adapter Type      State                  Status

---------------------------------------------------

  0a   initiator  PENDING ( target )        offline

  0b   initiator  PENDING ( target )        offline

 

headb>rebbot

headb>fcp start

headb> fcadmin config

 

                  Local  

Adapter Type      State                  Status

---------------------------------------------------

  0a   target     CONFIGURED             online

  0b   target     CONFIGURED             online
headb> fcp status

FCP service is running.