目录
简介 Cisco的iSCSI驱动,在服务器上位于,是iSCSI解决方法的关键组件。这些iSCSI驱动拦截SCSI命令,压缩它们到IP包,并重发它们到Cisco SN 5420、Cisco SN 5428, Cisco SN5428-2或者Cisco MDS/IPS-8。本文为Linux iSCSI主机提供配置示例给MDS/IPS-8。
开始使用前
Cisco MDS 9000在的本文使用是指在MDS 9000系列(MD 9506的所有光纤信道(FC)交换产品, MDS9509, MDS9216)。IPS刀片是指IP存储设备服务模块。有关文档规则的详细信息,请参阅
Cisco 技术提示规则。
在您开始进行您的在您需要安装iSCSI驱动是兼容对您的Linux版本的MDS9000前的iSCSI配置。驱动程序的多数当前版本可以在Linux (仅限注册用户)页的Cisco iSCSI驱动找到在Cisco.com。README.txt文件包括在驱动程序zip(tar)文件中。README包含关于许可证协议的信息、驱动程续安装和配置说明以及驱动体系结构的技术概要。
操作系统的需求和补丁程序需求在Cisco iSCSI驱动的System Requirements部分描述Linux版本注释的。
使用的组件 本文档中的信息基于以下软件和硬件版本。
Linux服务器[root@sse-andres sbin]# uname -a
Linux sse-andres 2.4.18-3smp #1 SMP Thu Apr 18 07:27:31 EDT 2002 i686
Cisco-iscsi-3.4.0.4 has been used.
[root@sse-andres sbin]# iscsi-ls
*******************************************************************************
Cisco iSCSI Driver Version ... 3.4.0.4 (27-Aug-2003 )
*******************************************************************************
有软件版本的1.1(1a) Cisco MDS 9216
vatican# sh module
Mod Ports Module-Type Model Status
--- ----- ------------------------------- ------------------ ------------
1 16 1/2 Gbps FC/Supervisor DS-X9216-K9-SUP active *
2 8 IP Storage Module DS-X9308-SMIP ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- ----------- ------ --------------------------------------------------
1 1.1(1a) 1.0 20:01:00:0c:30:57:5e:c0 to 20:10:00:0c:30:57:5e:c0
2 1.1(1a) 0.2 20:41:00:0c:30:57:5e:c0 to 20:48:00:0c:30:57:5e:c0
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 00-0b-be-f8-7f-00 to 00-0b-be-f8-7f-04 JAB070804Q3
2 00-05-30-00-a8-56 to 00-05-30-00-a8-62 JAB070205AM
* this terminal session
Vatican# sh ver
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2003 by Cisco Systems, Inc. All rights reserved.
The copyright for certain works contained herein are owned by
Andiamo Systems, Inc. and/or other third parties and are used and
distributed under license.
Software
BIOS: version 1.0.7
loader: version 1.0(3a) [last : 1.1(0.133c)]
kickstart: version 1.1(1a)
system: version 1.1(1a)
BIOS compile time: 03/20/03
kickstart image file is: bootflash:/k111a
kickstart compile time: 6/12/2003 14:00:00
system image file is: bootflash:/s111a
system compile time: 6/12/2003 14:00:00
Hardware
RAM 963108 kB
bootflash: 500736 blocks (block size 512b)
slot0: 0 blocks (block size 512b)
vatican uptime is 7 days 1 hours 18 minute(s) 42 second(s)
Last reset at 955065 usecs after Wed Sep 10 08:13:50 2003
Reason: Reset Requested by CLI command reload
System version: 1.1(2)
本文档中的信息都是基于特定实验室环境中的设备创建的。本文档中使用的所有设备最初均采用原始(默认)配置。如果您是在真实网络上操作,请确保您在使用任何命令前已经了解其潜在影响。
背景理论
IPS模块提供IP主机存取对于FC存储设备。IPS模块是DS-X9308-SMIP。它提供透明SCSI路由。使用iSCSI协议的IP主机能透明访问在IP主机在iSCSI协议数据单元的FC网络的iSCSI目标(PDU)发送SCSI命令集封装到在TCP/IP连接的一个MDS9000 IPS端口。在IPS模块上,连接提供以适当地配置的千兆以太网接口的形式。IPS模块使您创建虚拟iSCSI目标并且映射他们到在FC SAN上可用的物理FC目标。它提交FC目标到IP主机,好象物理目标附加对IP网络。
通过IPS模块要求对存储设备的访问的每台iSCSI主机需要有安装的一兼容的iSCSI驱动。使用iSCSI协议, iSCSI驱动允许iSCSI主机传输SCSI请求和答复在IP网络。从主机操作系统的角度, iSCSI驱动看来是SCSI运输驱动程序,与主机中一条外围通道的FC驱动程序相似。从存储设备的角度,每台IP主机出现为一台FC主机。
路由SCSI从IP主机到FC存储设备包括以下主要操作:
传输iSCSI请求和答复在IP网络在主机和IPS模块之间。
路由SCSI请求和答复在主机在IP网络和FC存储设备之间(转换iSCSI对FCP反之亦然)。此运输路线由IPS模块执行。
传输FCP请求或答复在IPS模块和FC存储设备之间。
默认情况下IPS模块不导入FC目标对iSCSI。在IPS模块安排FC目标可用iSCSI创始者前,动态或静态映射必须配置。当两个都被配置后,静态被映射的FC目标有一个配置的名称。在此配置中您将参见静态映射示例。使用动态映射,每次iSCSI主机连接对IPS模块一个新的FC N端口创建,并且为此N端口和pWWNs分配的nWWNs可能不同的。请使用静态映射方法,如果您需要iSCSI主机每次获得同样nWWN和pWWN,它接到IPS模块。静态映射在IPS模块可以用于访问有映射的访问控制和的LUN/根据创始者的pWWNs和nWWNs的屏蔽的配置的智能FC存储阵列。
您能通过指定的IPS端口列表将是通告和指定iSCSI允许的发起者节点名列表控制对每个静态映射的iSCSI目标的访问访问它。FC基于分区的访问控制和基于ISCSI的访问控制是访问控制可以为iSCSI提供的二个机制。可以同时使用两个方法。在此配置默认区域为特定VSAN允许。IPS模块使用基于域名的iSCSI的节点和FC基于分区的访问控制列表在iSCSI发现和iSCSI会话创建时强制执行访问控制。
iSCSI发现:当iSCSI主机创建一个iSCSI发现会话并询问所有iSCSI目标时, IPS模块返回iSCSI目标列表此iSCSI主机允许基于接入控制策略的接入。
iSCSI会话创建:当IP主机启动iSCSI会话时, IPS模块验证指定的iSCSI目标(在会议登录请求)是否静态映射到目标,如果是,验证IP主机的iSCSI节点名是否允许访问目标。如果IP主机没有权限,其登录被拒绝。
IPS模块,然后创建一个FC虚拟N端口(N端口可能已经存在)此IP主机的并且执行由IP主机访问FC目标pwwn FCID的一FC名称服务器查询。它使用IP主机虚拟N端口的pwwn作为名称服务器查询的请求方。因此,名称服务器执行的一次强制的pwwn区域查询并且回应查询。如果FCID由名称服务器返回,则iSCSI会话接受。否则,登录请求被拒绝。
配置
在此部分,您提交以信息配置MDS9216和Cisco iSCSI驱动Linux的。
网络图
本文档使用下图所示的网络设置。
配置
本文档使用如下所示的配置。
sse-andres (Linux版本2.4.18-3)
梵蒂冈(MDS9216)
sse-andres (Linux版本2.4.18-3)
在Linux主机上,需要修改iscsi.conf。[root@sse-andres etc]# cat /etc/iscsi.conf# iSCSI configuration file - see iscsi.conf(5)
# Authentication Settings
# -----------------------
# You may configure a default Username and Password to use for CHAP
# authentication by specifying the Global username and password parameters
# in the format as mentioned below. These entries will need to precede any
# "DiscoveryAddress" entries if authentication needs to be enabled for all the
# iSCSI targets.
#
# Example:
#
#Username=alice
#Password=nty57nbe
# or
#OutgoingUsername=alice
#OutgoingPassword=nty57nbe
#
# The "OutgoingUsername" will specify the username to be sent to the target
# for login authentication. The "OutgoingPassword" is the CHAP secret password
# to be used when sending challenge responses to the target.
#
# You may configure CHAP authentication settings that will apply to every
# target discovered at a particular address by adding "OutgoingUsername=u"
# and "OutgoingPassword=p" entries indented below the "DiscoveryAddress"
# entry they apply to.
#
# Example:
#
#DiscoveryAddress=192.168.10.94
DiscoveryAddress=10.48.69.242 Continuous=yes !--- Configure the IP address of the GE interface that accepts iSCSI request from your host.# LUN Settings
# ------------
# The LUN settings can be specified per TargetName or for all the targets
# whose TargetNames are mentioned in the configuration file. If no TargetName
# is present in the configuration file, the lun(s) will be configured for
# all the available iSCSI targets.
# The LUN settings can be specified in the following 3 formats:-
# LUN=
# LUNs=
# LUNs=
#
# The range of luns to be configured can be specified using a hyphen. A comma
# separated list of luns can also be used.
# Example:
#
#LUN=35
#LUNs=39-47
#LUNs=200,49,0,31
LUNs=0-255#
# LUNs can be configured per TargetName as mentioned in the format below.
#
#TargetName=iqn.1987-05.com.cisco:00.0d1d898e8d66.t0
# LUNs=39-47
# Continuous Discovery settings
# -----------------------------
# You can configure discovery session to be kept open by setting
# "Continuous" key to "yes" (default setting). Set Continuous=no to close
# the discovery session, once the discovery is over.
#
#Continuous=yes
#Continuous=no
#
# This parameter can be specified per DiscoveryAddress configuration.
#
#DiscoveryAddress=10.77.13.52
# Continuous=yes
[root@sse-andres iscsi]# cat /var/lib/iscsi/bindings # iSCSI bindings, file format version 1.0. # NOTE: this file is automatically maintained by the iSCSI daemon. # You should not need to edit this file under most circumstances. # If iSCSI targets in this file have been permanently deleted, you # may wish to delete the bindings for the deleted targets. # # Format: # bus target iSCSI # id id TargetName # 0 0 seagate 0 1 clariion-lun-3-4-5 [root@sse-andres iscsi]# !--- The iSCSI driver discovery daemon process looks up each discovered target !--- in the /var/lib/iscsi/bindings file. If an entry exists in the file for the !--- target, the corresponding SCSI target ID is assigned to the target. If !--- no entry exists for the target, the smallest available SCSI target ID !--- is assigned and an entry is written to the /var/lib/iscsi/bindings file for !--- this target. !--- Note that the /var/lib/iscsi/bindings file will permanently contain entries !--- for all iSCSI targets ever logged into from this host. If a target is !--- no longer available to a host, you can manually edit the file and remove !--- entries so that the obsolete target no longer consumes a SCSI target ID. !--- If you know the iSCSI target name of a target in advance, and you want !--- it to be assigned a particular SCSI target ID, you can add an entry !--- manually. You should stop the iSCSI driver before editing the !--- /var/lib/iscsi/bindings file. !--- To manually start the iSCSI driver, enter /etc/init.d/iscsi start !--- To manually stop the iSCSI driver, enter/etc/init.d/iscsi stop
梵蒂冈(Cisco MDS 9216)
....
vsan database
vsan 555 !--- Vsan 555 has been used for iSCSI targets.....
vsan database
vsan 555 interface fc1/3
vsan 555 interface fc1/7
.... boot system bootflash:/s111a
boot kickstart bootflash:/k111a
ip domain-name cisco.com
ip name-server 144.254.10.123
ip default-gateway 10.48.69.129
ip route 10.48.69.154 255.255.255.255 10.48.69.200
iscsi authentication none
ip routing iscsi initiator ip-address 10.48.69.154
vsan 555 !--- Identifies the iSCSI initiator based on the IP address ande. !--- Virtual N port is created for each NIC or network interface. !--- Vsan 555 has been used for iSCSI targets, configure initiator IP address. !--- Targets via Vsan 555 are accesible by iSCSI initiators. iscsi virtual-target name seagate
pWWN 21:00:00:20:37:67:f7:a2 fc-lun 0000 iscsi-lun 0000
initiator ip address 10.48.69.154 permit !--- Create a static iSCSI virtual target for LUN 3, 4, 5 of Clariion.iscsi virtual-target name clariion-lun-3-4-5
pWWN 50:06:01:60:88:02:a8:2b fc-lun 0003 iscsi-lun 0003
pWWN 50:06:01:60:88:02:a8:2b fc-lun 0004 iscsi-lun 0004
pWWN 50:06:01:60:88:02:a8:2b fc-lun 0005 iscsi-lun 0005
advertise interface GigabitEthernet2/1
initiator ip address 10.48.69.154 permit...
switchname vatican ....
zone default-zone permit vsan 555
....
interface GigabitEthernet2/1
ip address 10.48.69.242 255.255.255.192
iscsi authentication none
no shutdown ....
interface fc1/3
switchport mode FL
switchport trunk mode off
no shutdown
....
interface fc1/7
switchport mode F
switchport trunk mode off
no shutdown interface mgmt0
ip address 10.48.69.157 255.255.255.192
interface iscsi2/1
no shutdown
本部分所提供的信息可用于确认您的配置是否正常工作。
netstat-n -验证在Linux主机的TCP连接。
iscsi-ls -显示现在可以得到的设备;请使用在Linux主机的iscsi-ls工具。
show zone status -显示区域信息。
show fcns database vsan 555 -显示一特定VSAN的名称服务器信息。
show flogi database vsan 555 -显示一特定VSAN的FLOGI服务器信息。
show vsan membership -请显示不同的VSAN的接口信息。
show iscsi initiator detail -显示iSCSI发起者信息。
show iscsi initiator iscsi-session detail -显示iSCSI发起者会话的详细信息。
show iscsi initiator fcp-session detail -显示iSCSI发起者FCP会话的详细信息。
show ips stats tcp interface gigabitethernet 2/1 detail -显示特定GE接口的TCP统计信息。
show iscsi virtual-target configured -显示在MDS9000配置的iSCSI虚拟目标。
show iscsi initiator configured -显示在MDS9000配置的iSCSI initators。
show ips arp interface gigabitethernet 2/1 -显示IPS特定GE接口的arp信息。
show scsi-target devices vsan 555 -显示特定VSAN的SCSI设备(映射对iSCSI-LUN的FC-LUNs)。
show int iscsi 2/1 -显示iSCSI接口。
show iscsi stats iscsi 2/1 -显示iSCSI统计信息。
show int gigabitethernet 2/1 -显示GE接口。
show ip route -显示Ip route信息。
本部分提供的信息可用于对配置进行故障排除。
故障排除步骤 下面提供与本配置有关的故障排除信息。
从sse-andres显示
从梵蒂冈(Cisco MDS 9216)显示
从sse-andres显示
[root@sse-andres init.d]# ./iscsi stopStopping iSCSI: sync umount sync iscsi [root@sse-andres sbin]# pwd
/usr/local/sbin
[root@sse-andres sbin]# iscsi-ls
*******************************************************************************
Cisco iSCSI Driver Version ... 3.4.0.4 (27-Aug-2003 )
******************************************************************************* [root@sse-andres init.d]# ./iscsi startName and location of the bindings file is changed to /var/lib/iscsi/bindings
Starting iSCSI: iscsi iscsid fsck/mount [root@sse-andres sbin]# netstat -nActive Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 10.48.69.154:37402 10.48.69.242:3260 ESTABLISHED
tcp 0 0 10.48.69.154:37403 10.48.69.242:3260 ESTABLISHED
tcp 0 0 10.48.69.154:37401 10.48.69.242:3260 ESTABLISHED !--- After adding the clariion-lun-3-4-5 virtual target on the MDS 9216.bindings
[root@sse-andres iscsi]#cat bindings# iSCSI bindings, file format version 1.0.
# NOTE: this file is automatically maintained by the iSCSI daemon.
# You should not need to edit this file under most circumstances.
# If iSCSI targets in this file have been permanently deleted, you
# may wish to delete the bindings for the deleted targets.
#
# Format:
# bus target iSCSI
# id id TargetName
#
0 0 seagate
0 1 clariion-lun-3-4-5
[root@sse-andres iscsi]# !--- To see the devices currently available, issue the iscsi-ls command.[root@sse-andres sbin]# iscsi-ls*******************************************************************************
Cisco iSCSI Driver Version ... 3.4.0.4 (27-Aug-2003 )
*******************************************************************************
TARGET NAME : seagate
TARGET ALIAS :
HOST NO : 1
BUS NO : 0
TARGET ID : 0
DISCOVERY ADDRESS : 10.48.69.242:3260
SESSION ESTABLISHED AT : Tue Sep 16 16:41:01 2003
NO. OF PORTALS : 1
TARGET ADDRESS 1 : 10.48.69.242:3260,128
SESSION ID : ISID 00023d000001 TSID 80
*******************************************************************************
TARGET NAME : clariion-lun-3-4-5
TARGET ALIAS :
HOST NO : 1
BUS NO : 0
TARGET ID : 1
DISCOVERY ADDRESS : 10.48.69.242:3260
SESSION ESTABLISHED AT : Tue Sep 16 16:41:03 2003
NO. OF PORTALS : 1
TARGET ADDRESS 1 : 10.48.69.242:3260,128
SESSION ID : ISID 00023d000001 TSID 80
*******************************************************************************
[root@sse-andres sbin]# [root@sse-andres sbin]# iscsi-ls -l*******************************************************************************
Cisco iSCSI Driver Version ... 3.4.0.4 (27-Aug-2003 )
*******************************************************************************
TARGET NAME : seagate
TARGET ALIAS :
HOST NO : 1
BUS NO : 0
TARGET ID : 0
DISCOVERY ADDRESS : 10.48.69.242:3260
SESSION ESTABLISHED AT : Wed Sep 17 12:28:18 2003
NO. OF PORTALS : 1
TARGET ADDRESS 1 : 10.48.69.242:3260,128
SESSION ID : ISID 00023d000001 TSID 80
DEVICE DETAILS :
--------------
LUN ID : 0
Vendor: SEAGATE Model: ST318203FC Rev: 0004
Type: Direct-Access ANSI SCSI revision: 02
*******************************************************************************
TARGET NAME : clariion-lun-3-4-5
TARGET ALIAS :
HOST NO : 1
BUS NO : 0
TARGET ID : 1
DISCOVERY ADDRESS : 10.48.69.242:3260
SESSION ESTABLISHED AT : Wed Sep 17 12:28:19 2003
NO. OF PORTALS : 1
TARGET ADDRESS 1 : 10.48.69.242:3260,128
SESSION ID : ISID 00023d000001 TSID 80
DEVICE DETAILS :
--------------
LUN ID : 3
Vendor: DGC Model: RAID 0 Rev: 0632
Type: Direct-Access ANSI SCSI revision: 04
LUN ID : 4
Vendor: DGC Model: RAID 0 Rev: 0632
Type: Direct-Access ANSI SCSI revision: 04
LUN ID : 5
Vendor: DGC Model: RAID 0 Rev: 0632
Type: Direct-Access ANSI SCSI revision: 04
*******************************************************************************
[root@sse-andres sbin]# [root@sse-andres sbin]# iscsi-ls -t seagate*******************************************************************************
Cisco iSCSI Driver Version ... 3.4.0.4 (27-Aug-2003 )
*******************************************************************************
TARGET NAME : seagate
TARGET ALIAS :
HOST NO : 1
BUS NO : 0
TARGET ID : 0
DISCOVERY ADDRESS : 10.48.69.242:3260
SESSION ESTABLISHED AT : Tue Sep 16 16:41:02 2003
NO. OF PORTALS : 1
TARGET ADDRESS 1 : 10.48.69.242:3260,128
SESSION ID : ISID 00023d000001 TSID 80
*******************************************************************************
[root@sse-andres sbin]# [root@sse-andres sbin]# fdisk -lDisk /dev/sda: 255 heads, 63 sectors, 4420 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 267 2040255 82 Linux swap
/dev/sda3 268 4420 33358972+ 83 Linux
Disk /dev/sdb: 64 heads, 32 sectors, 17366 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdc: 64 heads, 32 sectors, 2047 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 2048 2096451 42 SFS
Partition 1 does not end on cylinder boundary:
phys=(260, 254, 63) should be (260, 63, 32)
Disk /dev/sdd: 64 heads, 32 sectors, 1023 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 64 heads, 32 sectors, 1023 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
[root@sse-andres sbin]# [root@sse-andres log]# pwd
/var/log/messages Sep 16 16:40:20 sse-andres kernel: iSCSI: driver shutdown killing all sessions
Sep 16 16:40:21 sse-andres kernel: iSCSI: driver shutdown killing timer 19252
Sep 16 16:40:21 sse-andres kernel: iSCSI: driver shutdown waiting for timer to terminate
Sep 16 16:40:21 sse-andres kernel: iSCSI: driver shutdown complete at 35634430
Sep 16 16:41:01 sse-andres iscsid[19603]: version 3.4.0.4 (27-Aug-2003)
Sep 16 16:41:01 sse-andres iscsid[19603]: INBP boot check returned this_is_inbp_boot = 0
Sep 16 16:41:01 sse-andres kernel: iSCSI: bus 0 target 0 = seagate
Sep 16 16:41:01 sse-andres kernel: iSCSI: bus 0 target 0 portal 0 = address 10.48.69.242 port 3260 group 128
Sep 16 16:41:01 sse-andres kernel: iSCSI: bus 0 target 0 trying to establish session c2582000 to portal 0, a
ddress 10.48.69.242 port 3260 group 128
Sep 16 16:41:01 sse-andres kernel: iSCSI: bus 0 target 0 established session c2582000 #1, portal 0, address
10.48.69.242 port 3260 group 128
Sep 16 16:41:01 sse-andres kernel: scsi singledevice 1 0 0 0
Sep 16 16:41:01 sse-andres kernel: Vendor: SEAGATE Model: ST318203FC Rev: 0004
Sep 16 16:41:01 sse-andres kernel: Type: Direct-Access ANSI SCSI revision: 02
Sep 16 16:41:01 sse-andres kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Sep 16 16:41:01 sse-andres kernel: iSCSI: bus 0 target 1 = clariion-lun-3-4-5
Sep 16 16:41:01 sse-andres kernel: iSCSI: bus 0 target 1 portal 0 = address 10.48.69.242 port 3260 group 128
Sep 16 16:41:01 sse-andres kernel: SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
Sep 16 16:41:01 sse-andres kernel: sdb:
从梵蒂冈(Cisco MDS 9216)显示
vatican# show zone statusVSAN: 1 default-zone: permit distribute: active only Interop: Off
Full Zoning Database :
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
Database Not Available
Status:
VSAN: 555 default-zone: permit distribute: active only Interop: Off
Full Zoning Database :
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
Database Not Available
Status: Default zoning policy changed to permit at Thu Sep 11 14:26:07 2003 !--- VSAN 555 has been used for this configuration, default-zone !--- behavior has been set to permit.vatican# sh flogi database vsan 555---------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
---------------------------------------------------------------------------
fc1/3 555 0x6b00e8 21:00:00:20:37:67:f7:a2 20:00:00:20:37:67:f7:a2
fc1/7 555 0x6b0100 50:06:01:60:88:02:a8:2b 50:06:01:60:11:02:a8:2b
iscsi2/1 555 0x6b0103 20:03:00:0c:30:57:5e:c2 20:02:00:0c:30:57:5e:c2
Total number of flogi = 3.
vatican# sh fcns da vsan 555VSAN 555:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0x6b00e8 NL 21:00:00:20:37:67:f7:a2 (Seagate) scsi-fcp:target
0x6b0100 N 50:06:01:60:88:02:a8:2b (Clariion) scsi-fcp:target
0x6b0103 N 20:03:00:0c:30:57:5e:c2 (Cisco) scsi-fcp:init isc..w
Total number of entries = 3 !--- FCID 0x6b0103 is the virtual N port(HBA) for the iSCSI host. vatican# show fcns database detail vsan 555------------------------
VSAN:555 FCID:0x6b00e8
------------------------
port-wwn (vendor) :21:00:00:20:37:67:f7:a2 (Seagate)
node-wwn :20:00:00:20:37:67:f7:a2
class :3
node-ip-addr :0.0.0.0
ipa :ff ff ff ff ff ff ff ff
fc4-types:fc4_features:scsi-fcp:target
symbolic-port-name :
symbolic-node-name :
port-type :NL
port-ip-addr :0.0.0.0
fabric-port-wwn :20:03:00:0c:30:57:5e:c0
hard-addr :0x000000
------------------------
VSAN:555 FCID:0x6b0100
------------------------
port-wwn (vendor) :50:06:01:60:88:02:a8:2b (Clariion)
node-wwn :50:06:01:60:11:02:a8:2b
class :3
node-ip-addr :0.0.0.0
ipa :ff ff ff ff ff ff ff ff
fc4-types:fc4_features:scsi-fcp:target
symbolic-port-name :
symbolic-node-name :
port-type :N
port-ip-addr :0.0.0.0
fabric-port-wwn :20:07:00:0c:30:57:5e:c0
hard-addr :0x000000
------------------------
VSAN:555 FCID:0x6b0103
------------------------
port-wwn (vendor) :20:03:00:0c:30:57:5e:c2 (Cisco)
node-wwn :20:02:00:0c:30:57:5e:c2
class :2,3
node-ip-addr :10.48.69.154
ipa :ff ff ff ff ff ff ff ff
fc4-types:fc4_features:scsi-fcp:init iscsi-gw
symbolic-port-name :
symbolic-node-name :10.48.69.154
port-type :N
port-ip-addr :0.0.0.0
fabric-port-wwn :20:41:00:0c:30:57:5e:c0
hard-addr :0x000000
Total number of entries = 3
vatican# show iscsi initiator detailiSCSI Node name is 10.48.69.154
iSCSI Initiator name: iqn.1987-05.com.cisco:01.2079ebcbfce
iSCSI alias name: sse-andres
Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic)
Member of vsans: 555
Number of Virtual n_ports: 1
Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
Interface iSCSI 2/1, Portal group tag is 0x80
VSAN ID 555, FCID 0x6b0103
2 FC sessions, 2 iSCSI sessions
iSCSI session details
Target: seagate
Statistics:
PDU: Command: 52, Response: 52
Bytes: TX: 65688, RX: 0
Number of connection: 1
TCP parameters
Local 10.48.69.242:3260, Remote 10.48.69.154:37738
Path MTU: 1500 bytes
Retransmission timeout: 300 ms
Round trip time: Smoothed 3 ms, Variance: 5
Advertized window: Current: 142 KB, Maximum: 142 KB, Scale: 3
Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
Congestion window: Current: 10 KB
Target: clariion-lun-3-4-5
Statistics:
PDU: Command: 79, Response: 79
Bytes: TX: 115000, RX: 0
Number of connection: 1
TCP parameters
Local 10.48.69.242:3260, Remote 10.48.69.154:37739
Path MTU: 1500 bytes
Retransmission timeout: 300 ms
Round trip time: Smoothed 4 ms, Variance: 6
Advertized window: Current: 192 KB, Maximum: 192 KB, Scale: 3
Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
Congestion window: Current: 10 KB
FCP Session details
Target FCID: 0x6b00e8 (S_ID of this session: 0x6b0103)
pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2
Session state: LOGGED_IN
1 iSCSI sessions share this FC session
Target: seagate
Negotiated parameters
RcvDataFieldSize 1392 our_RcvDataFieldSize 1392
MaxBurstSize 0, EMPD: FALSE
Random Relative Offset: FALSE, Sequence-in-order: Yes
Statistics:
PDU: Command: 0, Response: 52
Target FCID: 0x6b0100 (S_ID of this session: 0x6b0103)
pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b
Session state: LOGGED_IN
1 iSCSI sessions share this FC session
Target: clariion-lun-3-4-5
Negotiated parameters
RcvDataFieldSize 1024 our_RcvDataFieldSize 1392
MaxBurstSize 0, EMPD: FALSE
Random Relative Offset: FALSE, Sequence-in-order: Yes
Statistics:
PDU: Command: 0, Response: 79 vatican# show iscsi initiator iscsi-session detailiSCSI Node name is 10.48.69.154
iSCSI Initiator name: iqn.1987-05.com.cisco:01.2079ebcbfce
iSCSI alias name: sse-andres
Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic)
Member of vsans: 555
Number of Virtual n_ports: 1
Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
Interface iSCSI 2/1, Portal group tag is 0x80
VSAN ID 555, FCID 0x6b0103
2 FC sessions, 2 iSCSI sessions
iSCSI session details
Target: seagate
Statistics:
PDU: Command: 52, Response: 52
Bytes: TX: 65688, RX: 0
Number of connection: 1
TCP parameters
Local 10.48.69.242:3260, Remote 10.48.69.154:37738
Path MTU: 1500 bytes
Retransmission timeout: 300 ms
Round trip time: Smoothed 3 ms, Variance: 4
Advertized window: Current: 142 KB, Maximum: 142 KB, Scale: 3
Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
Congestion window: Current: 10 KB
Target: clariion-lun-3-4-5
Statistics:
PDU: Command: 79, Response: 79
Bytes: TX: 115000, RX: 0
Number of connection: 1
TCP parameters
Local 10.48.69.242:3260, Remote 10.48.69.154:37739
Path MTU: 1500 bytes
Retransmission timeout: 300 ms
Round trip time: Smoothed 4 ms, Variance: 5
Advertized window: Current: 192 KB, Maximum: 192 KB, Scale: 3
Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
Congestion window: Current: 10 KB vatican# show iscsi initiator fcp-session detailiSCSI Node name is 10.48.69.154
iSCSI Initiator name: iqn.1987-05.com.cisco:01.2079ebcbfce
iSCSI alias name: sse-andres
Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic)
Member of vsans: 555
Number of Virtual n_ports: 1
Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
Interface iSCSI 2/1, Portal group tag is 0x80
VSAN ID 555, FCID 0x6b0103
2 FC sessions, 2 iSCSI sessions
FCP Session details
Target FCID: 0x6b00e8 (S_ID of this session: 0x6b0103)
pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2
Session state: LOGGED_IN
1 iSCSI sessions share this FC session
Target: seagate
Negotiated parameters
RcvDataFieldSize 1392 our_RcvDataFieldSize 1392
MaxBurstSize 0, EMPD: FALSE
Random Relative Offset: FALSE, Sequence-in-order: Yes
Statistics:
PDU: Command: 0, Response: 52
Target FCID: 0x6b0100 (S_ID of this session: 0x6b0103)
pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b
Session state: LOGGED_IN
1 iSCSI sessions share this FC session
Target: clariion-lun-3-4-5
Negotiated parameters
RcvDataFieldSize 1024 our_RcvDataFieldSize 1392
MaxBurstSize 0, EMPD: FALSE
Random Relative Offset: FALSE, Sequence-in-order: Yes
Statistics:
PDU: Command: 0, Response: 79 vatican#show ips stats tcp interface gigabitethernet 2/1 detailTCP Statistics for port GigabitEthernet2/1
TCP send stats
43984 segments, 4563280 bytes
23363 data, 20571 ack only packets
29 control (SYN/FIN/RST), 0 probes, 28 window updates
3 segments retransmitted, 144 bytes
3 retransmitted while on ethernet send queue, 1 packets split
0 delayed acks sent
TCP receive stats
62083 segments, 20548 data packets in sequence, 997148 bytes in sequence
1504 predicted ack, 20303 predicted data
0 bad checksum, 0 multi/broadcast, 0 bad offset
0 no memory drops, 0 short segments
0 duplicate bytes, 0 duplicate packets
0 partial duplicate bytes, 0 partial duplicate packets
0 out-of-order bytes, 1 out-of-order packets
0 packet after window, 0 bytes after window
0 packets after close
21696 acks, 4562950 ack bytes, 0 ack toomuch, 19373 duplicate acks
0 ack packets left of snd_una, 5 non-4 byte aligned packets
19282 window updates, 0 window probe
745 pcb hash miss, 478 no port, 6 bad SYN, 0 paws drops
TCP Connection Stats
0 attempts, 35 accepts, 35 established
33 closed, 13 drops, 0 conn drops
3 drop in retransmit timeout, 10 drop in keepalive timeout
0 drop in persist drops, 0 connections drained
TCP Miscellaneous Stats
21105 segments timed, 21685 rtt updated
15 retransmit timeout, 1 persist timeout
19448 keepalive timeout, 19437 keepalive probes
TCP SACK Stats
0 recovery episodes, 0 data packets, 0 data bytes
0 data packets retransmitted, 0 data bytes retransmitted
0 connections closed, 0 retransmit timeouts
TCP SYN Cache Stats
37 entries, 35 connections completed, 0 entries timed out
0 dropped due to overflow, 2 dropped due to RST
0 dropped due to ICMP unreach, 0 dropped due to bucket overflow
0 abort due to no memory, 1 duplicate SYN, 183 no-route SYN drop
0 hash collisions, 0 retransmitted
TCP Active Connections
Local Address Remote Address State Send-Q Recv-Q
10.48.69.242:3260 10.48.69.154:37737 ESTABLISH 0 0
10.48.69.242:3260 10.48.69.154:37738 ESTABLISH 0 0
10.48.69.242:3260 10.48.69.154:37739 ESTABLISH 0 0
0.0.0.0:3260 0.0.0.0:0 LISTEN 0 0 vatican# show iscsi virtual-target configuredtarget: clariion-lun-3-4-5
* Port WWN 50:06:01:60:88:02:a8:2b
Configured node
No. of LU mapping: 3
iSCSI LUN: 0003, FC LUN: 0003
iSCSI LUN: 0004, FC LUN: 0004
iSCSI LUN: 0005, FC LUN: 0005
No. of advertised interface: 1
GigabitEthernet 2/1
No. of initiators permitted: 2
initiator 10.48.69.154/32 is permitted
initiator 10.61.80.53/32 is permitted
all initiator permit is disabled
target: seagate
* Port WWN 21:00:00:20:37:67:f7:a2
Configured node
No. of LU mapping: 1
iSCSI LUN: 0000, FC LUN: 0000
No. of initiators permitted: 1
initiator 10.48.69.154/32 is permitted
all initiator permit is disabled vatican# show iscsi initiator configurediSCSI Node name is 10.48.69.238
Member of vsans: 1016
iSCSI Node name is 10.48.69.239
Member of vsans: 1016
iSCSI Node name is 100.100.100.10
Member of vsans: 600
No. of PWWN: 1
Port WWN is 20:03:00:0c:30:6c:24:42
iSCSI Node name is 10.48.69.154
Member of vsans: 555
vatican#show ips arp interface gigabitethernet 2/1Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.48.69.200 0 0008.e21e.c7bc ARPA GigabitEthernet2/1
Internet 10.48.69.201 5 0202.3d30.45c9 ARPA GigabitEthernet2/1
Internet 10.48.69.206 8 0202.3d30.45ce ARPA GigabitEthernet2/1
Internet 10.48.69.209 5 0009.7c60.561f ARPA GigabitEthernet2/1
Internet 10.48.69.226 6 0060.08f6.bc1a ARPA GigabitEthernet2/1
Internet 10.48.69.229 3 0800.209e.edab ARPA GigabitEthernet2/1
Internet 10.48.69.230 3 0001.0349.ff13 ARPA GigabitEthernet2/1
Internet 10.48.69.231 5 0002.b3c1.7dab ARPA GigabitEthernet2/1
Internet 10.48.69.232 8 0003.4796.34c3 ARPA GigabitEthernet2/1
Internet 10.48.69.233 0 0010.4200.7d5b ARPA GigabitEthernet2/1
Internet 10.48.69.235 11 0800.20b6.6559 ARPA GigabitEthernet2/1
Internet 10.48.69.238 10 0030.6e1b.6f51 ARPA GigabitEthernet2/1
Internet 10.48.69.239 2 0030.6e1c.a00b ARPA GigabitEthernet2/1
Internet 10.48.69.241 0 000b.cdaf.b4c3 ARPA GigabitEthernet2/1
Internet 10.48.69.248 6 0202.3d30.45f8 ARPA GigabitEthernet2/1
Internet 10.48.69.252 2 0202.3d30.45fc ARPA GigabitEthernet2/1
Internet 10.10.2.28 9 0202.3d0a.021c ARPA GigabitEthernet2/1 vatican# vatican# show scsi-targe devices vsan 555
--------------------------------------------------------------------------------
VSAN FCID PWWN VENDOR MODEL REV
--------------------------------------------------------------------------------
555 0x6b00e8 21:00:00:20:37:67:f7:a2 SEAGATE ST318203FC 0004
555 0x6b0100 50:06:01:60:88:02:a8:2b DGC RAID 0 0632 vatican# sh int iscsi 2/1iscsi2/1 is up
Hardware is GigabitEthernet
Port WWN is 20:41:00:0c:30:57:5e:c0
Admin port mode is ISCSI
Port mode is ISCSI
Speed is 1 Gbps
iSCSI initiator is identified by name
Number of iSCSI session: 3, Number of TCP connection: 3
Configured TCP parameters
Local Port is 3260
PMTU discover is enabled, reset timeout is 3600 sec
Keepalive-timeout is 60 sec
Minimum-retransmit-time is 300 ms
Max-retransmissions 4
Sack is disabled
Maximum allowed bandwidth is 500000 kbps
Minimum available bandwidth is 500000 kbps
Estimated round trip time is 10000 usec
5 minutes input rate 16 bits/sec, 2 bytes/sec, 0 frames/sec
5 minutes output rate 16 bits/sec, 2 bytes/sec, 0 frames/sec
iSCSI statistics
Input 17258 packets, 841000 bytes
Command 717 pdus, Data-out 0 pdus, 0 bytes
Output 19951 packets, 4216300 bytes
Response 711 pdus (with sense 12), R2T 0 pdus
Data-in 2687 pdus, 3246192 bytes
vatican#sh ip routeCodes: C - connected, S - static
Default gateway is 10.48.69.129
S 10.48.69.154 via 10.48.69.200, gigabitethernet2-1
S 10.61.80.53 via 10.48.69.200, gigabitethernet2-1
C 10.48.69.192/26 is directly connected, gigabitethernet2-1
C 10.48.69.128/26 is directly connected, mgmt0 vatican# sh ips ip route interface gigabitethernet 2/1Codes: C - connected, S - static
No default gateway
S 10.61.80.53/32 via 10.48.69.200, GigabitEthernet2/1
S 10.48.69.154/32 via 10.48.69.200, GigabitEthernet2/1
C 10.48.69.192/26 is directly connected, GigabitEthernet2/1
vatican# sh ip route ?
configured Show the IP routes configured on the system
Carriage Return
组织管理器和设备管理器显示 此部分提供从MDS组织管理器1.1(2)和设备管理器的屏幕截图1.1.(2)。
从组织管理器的拓扑图
选择FC-LUNs显示pWWNs、LUN您的从设备管理器的LUN ID和产能。
选择ip-iscsi显示从设备管理器的iSCSI会话。
相关信息