基于OHCI的USB主机 —— OHCI（ED结构说明）

ED结构说明

节选自OHCI的规范。

Name		HC Access	Description
FA		R	FunctionAddress This is the USB address of the function containing the endpoint that this ED controls
EN		R	EndpointNumber This is the USB address of the endpoint within the function
D		R	Direction This 2-bit field indicates the direction of data flow (IN or OUT.)  If neither IN nor OUT is specified, then the direction is determined from the PID field of the TD. The encoding of the bits of this field are:
				Code	Direction
				00b	Get direction From TD
				01b	OUT
				10b	IN
				11b	Get direction From TD
S		R	Speed Indicates the speed of the endpoint: full-speed (S = 0) or low-speed (S = 1.)
K		R	sKip When this bit is set, the HC continues on to the next ED on the list without attempting access to the TD queue or issuing any USB token for the endpoint
F		R	Format This bit indicates the format of the TDs linked to this ED.  If this is a Control, Bulk, or Interrupt Endpoint, then F = 0, indicating that the General TD format is used.  If this is an Isochronous Endpoint, then F = 1, indicating that the Isochronous TD format is used.
MPS		R	MaximumPacketSize This field indicates the maximum number of bytes that can be sent to or received from the endpoint in a single data packet
TailP		R	TDQueueTailPointer If TailP and HeadP are the same, then the list contains no TD that the HC can process.  If TailP and HeadP are different, then the list contains a TD to be processed.
H		R/W	Halted This bit is set by the HC to indicate that processing of the TD queue on the endpoint is halted, usually due to an error in processing a TD.
C		R/W	toggleCarry This bit is the data toggle carry bit.  Whenever a TD is retired, this bit is written to contain the last data toggle value (LSb of data Toggle field) from the retired TD.  This field is not used for Isochronous Endpoints
HeadP		R/W	TDQueueHeadPointer Points to the next TD to be processed for this endpoint.
NextED		R	NextED If nonzero, then this entry points to the next ED on the list