Data-only container madness

2019独角兽企业重金招聘Python工程师标准>>>

Data-only containers are a pattern for managing your docker volumes with containers instead of manually with host-mounted volumes. For more info on the pattern, see Data-only container pattern

If you are using the busybox, scratch, or <insert minimally sized image here>, you are doing it wrong, and here's why.

Let's take this Dockerfile:

FROM debian:jessie RUN useradd mickey RUN mkdir /foo && touch /foo/bar && chown -R mickey:mickey /foo
USER mickey CMD ls -lh /foo

Build it:

~: docker build -t mickey_foo -< Dockerfile

Deploy it:

~: docker run --rm -v /foo mickey_foo
total 0
-rw-r--r-- 2 mickey mickey 0 Nov 18 05:58 bar
~:

Ok, all good, now with a data-only container with busybox:

~: docker run -v /foo --name mickey_data busybox true ~: docker run --rm --volumes-from mickey_data mickey_foo
total 0 # Empty WTF?? ~: docker run --rm --volumes-from mickey_data mickey_foo ls -lh /
total 68K
drwxr-xr-x 2 root root 4.0K Nov 18 06:02 bin
drwxr-xr-x 2 root root 4.0K Oct 9 18:27 boot
drwxr-xr-x 5 root root 360 Nov 18 06:05 dev
drwxr-xr-x 1 root root 4.0K Nov 18 06:05 etc
drwxr-xr-x 2 root root 4.0K Nov 18 06:02 foo
drwxr-xr-x 2 root root 4.0K Oct 9 18:27 home
drwxr-xr-x 9 root root 4.0K Nov 18 06:02 lib
drwxr-xr-x 2 root root 4.0K Nov 18 06:02 lib64
drwxr-xr-x 2 root root 4.0K Nov 5 21:40 media
drwxr-xr-x 2 root root 4.0K Oct 9 18:27 mnt
drwxr-xr-x 2 root root 4.0K Nov 5 21:40 opt
dr-xr-xr-x 120 root root 0 Nov 18 06:05 proc
drwx------ 2 root root 4.0K Nov 18 06:02 root
drwxr-xr-x 3 root root 4.0K Nov 18 06:02 run
drwxr-xr-x 2 root root 4.0K Nov 18 06:02 sbin
drwxr-xr-x 2 root root 4.0K Nov 5 21:40 srv
dr-xr-xr-x 13 root root 0 Nov 18 06:05 sys
drwxrwxrwt 2 root root 4.0K Nov 5 21:46 tmp
drwxr-xr-x 10 root root 4.0K Nov 18 06:02 usr
drwxr-xr-x 11 root root 4.0K Nov 18 06:02 var # Owened by root?  WTF??? ~: docker run --rm --volumes-from mickey_data mickey_foo touch /foo/bar
touch: cannot touch '/foo/bar': Permission denied # WTF????

Uh-oh, what happened? /foo still exists, but it's empty... and it's owned byroot?

Let's try this instead:

~: docker rm -v mickey_data # remove the old one mickey_data
~: docker run --name mickey_data -v /foo mickey_foo true ~: docker run --rm --volumes-from mickey_data mickey_foo
total 0
-rw-r--r-- 1 mickey mickey 0 Nov 18 05:58 bar # Yes! ~: docker run --rm --volumes-from mickey_data mickey_foo ls -lh /
total 68K
drwxr-xr-x 2 root   root   4.0K Nov 18 06:02 bin
drwxr-xr-x 2 root   root   4.0K Oct 9 18:27 boot
drwxr-xr-x 5 root   root 360 Nov 18 06:11 dev
drwxr-xr-x 1 root   root   4.0K Nov 18 06:11 etc
drwxr-xr-x 2 mickey mickey 4.0K Nov 18 06:10 foo
drwxr-xr-x 2 root   root   4.0K Oct 9 18:27 home
drwxr-xr-x 9 root   root   4.0K Nov 18 06:02 lib
drwxr-xr-x 2 root   root   4.0K Nov 18 06:02 lib64
drwxr-xr-x 2 root   root   4.0K Nov 5 21:40 media
drwxr-xr-x 2 root   root   4.0K Oct 9 18:27 mnt
drwxr-xr-x 2 root   root   4.0K Nov 5 21:40 opt
dr-xr-xr-x 121 root   root 0 Nov 18 06:11 proc
drwx------ 2 root   root   4.0K Nov 18 06:02 root
drwxr-xr-x 3 root   root   4.0K Nov 18 06:02 run
drwxr-xr-x 2 root   root   4.0K Nov 18 06:02 sbin
drwxr-xr-x 2 root   root   4.0K Nov 5 21:40 srv
dr-xr-xr-x 13 root   root 0 Nov 18 06:05 sys
drwxrwxrwt 2 root   root   4.0K Nov 5 21:46 tmp
drwxr-xr-x 10 root   root   4.0K Nov 18 06:02 usr
drwxr-xr-x 11 root   root   4.0K Nov 18 06:02 var # YES!! ~: docker run --rm --volumes-from mickey_data mickey_foo touch /foo/baz
~: docker run --rm --volumes-from mickey_data mickey_foo ls -lh /foo
total 0
-rw-r--r-- 1 mickey mickey 0 Nov 18 06:11 bar
-rw-r--r-- 1 mickey mickey 0 Nov 18 06:12 baz # YES!!!

So what happened here?

By using the same image for both the data-container, docker was able to seed the volume with the data from the image when we created the data container. Data from the image is only ever seeded into a volume when the volume is created. Since busybox was originally used as the image for the data-only container, and there is no /foo in the busybox image, docker created the dir as rootand nothing else. Since --volumes-from does not actually create a volume, it just re-uses an existing volume, nothing ever made it into the volume itself. Since the volume dir was owned by root and we were trying to use a non-root user in the container to modify the volume, it failed.
This is extremely common with images like mongodb, mysql, and postgres.

So are we stuck using the same image for both? Well, yes if you want it to work as expected... however stuck isn't really the correct term here. The reason we are using a minimal image is to save space, but this is not what actually happened...

The debian:jessie image is roughly 150MB. Because of the way Docker works, we can re-use the debian:jessie image 1000 (or 10000, or 100000) times and it is still only ever using 150MB.
A container itself does not take up any space unless as part of running it you've written something to disk. This is because a container's filesystem is essentially a write-layer over the image. This enable Docker to use an image N times (for containers) without taking up any extra space.
So in reality, by using busybox, we've actually taken up more space than by using the same image (ie, mickey_foo in the example) multiple times.

In practice, I usually do something like this:

~: docker run --name mydb-data --entrypoint /bin/echo mysql Data-only container for mydb
~: docker run -d --name mydb --volumes-from mydb-data mysql

In the above example, the command the data-only container ends up running is/bin/sh -c '/bin/echo Data-only container for mydb'.
This makes the data-only container relatively easy to grep for, and also gives a good clue, based on the command being run in the container, what the container is actually for.

转载于:https://my.oschina.net/zx0211/blog/532007