Ethernet LEDs
The Ethernet port has two LEDs: Link/Act and 10/100. The Link/Act LED should be ON at each end of the Ethernet cable. If the Link/Act LED is not ON, it usually indicates that there is a bad connection or a bad cable. See the table below for the meaning of each LED and its state.
LED State Table: Ethernet
LED
|
Meaning
|
State
|
Link/Act
|
Link Activity
|
ON = link active
|
BLINK = network activity | ||
OFF = link inactive
| ||
10/100
|
Baud Rate / Network Speed
|
ON = 100Mb
|
OFF = 10Mb
|