CentOS6.2下搭建LVS(NAT)+Keepalived实现高性能高可用负载均衡服务

上一篇文档写的是LVS（DR）+ Keepalived实现高性能高可用负载均衡服务器，这次主要写的是基于LVS（NAT）+ Keepalived实现高性能高可用负载均衡服务器。
其实NAT模式在企业用的不多，我和很多朋友都沟通过这个事情，我们搭建这个环节主要是测试一下整个性能与DR的具体的差距。但是在搭建这个环境过程中遇到一点小问题，就是内网的VIP不知道如何去设置，这个问题困扰了我很长时间，因为LVS也只是刚刚接触，期间给我一个之前的学员电话他给我提供了一个方法，昨天晚上回去测试OK~！今天上午在线上也测试了，没有问题。以后要继续努力~！朝着我的目标前进~！同时希望各位在参考时遇到什么问题和我及时沟通，以便更好的完善文档！~

软件下载：
keepalived：http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
ipvsadm: http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.26.tar.gz 注意：(for kernel 2.6.28-rc3 or later)
popt-static：http://mirror.centos.org/centos/6/os/x86_64/Packages/popt-static-1.13-7.el6.x86_64.rpm
 

实验拓扑图

1、在2台Director Server上分别配置LVS+Keepalived
[root@host1 ~]# rpm -ivh popt-static-1.13-7.el6.x86_64.rpm
#看我前一篇文章http://crazylinux.blog.51cto.com/259244/811591
[root@host1 ~]# yum -y install kernel-devel make gcc openssl-devel lftp libnl* popt*
[root@host1 ~]# ln -s /usr/src/kernels/2.6.18-194.el5-x86_64/ /usr/src/linux
[root@host1 ~]# tar -zxvf ipvsadm-1.26.tar.gz -C /usr/src/
[root@host1 ~]# cd /usr/src/ipvsadm-1.26/
[root@host1 ipvsadm-1.26]# make
[root@host1 ipvsadm-1.26]# make install
[root@host1 ~]# tar -zxvf keepalived-1.2.2.tar.gz -C /usr/src/
[root@host1 ~]# cd /usr/src/keepalived-1.2.2/
[root@host1 keepalived-1.2.2]# ./configure
[root@host1 keepalived-1.2.2]# make
[root@host1 keepalived-1.2.2]# make install
[root@host1 keepalived-1.2.2]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
[root@host1 keepalived-1.2.2]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
[root@host1 keepalived-1.2.2]# mkdir /etc/keepalived
[root@host1 keepalived-1.2.2]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
[root@host1 keepalived-1.2.2]# cp /usr/local/sbin/keepalived /usr/sbin/
2 、开启路由转发
[root@host1 ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
[root@host1 ~]# sysctl -p
3、配置Keepalived
[root@host1 ~]# less /etc/keepalived/keepalived.conf

1. ! Configuration File for keepalived
2. global_defs {
3. router_id LVS_MASTER #备上修改LVS_BACKUP
4. }
5. vrrp_instance VI_1 {
6. state MASTER #备上修改BACKUP
7. interface eth0
8. virtual_router_id 51
9. priority 100 #备上修改80
10. advert_int 1
11. authentication {
12. auth_type PASS
13. auth_pass 1111
14. }
15. virtual_ipaddress {
16. 10.0.0.10
17. }
18. }
20. vrrp_instance LAN_GATEWAY {
21. state MASTER #备上修改BACKUP
22. interface eth1
23. virtual_router_id 52
24. priority 100 #备上修改80
25. advert_int 1
26. authentication {
27. auth_type PASS
28. auth_pass 1111
29. }
30. virtual_ipaddress {
31. 192.168.10.10
32. }
33. }
35. virtual_server 10.0.0.10 80 {
36. delay_loop 6
37. lb_algo rr
38. lb_kind NAT
39. # nat_mask 255.255.255.0
40. # persistence_timeout 50
41. protocol TCP
43. real_server 192.168.10.3 80 {
44. weight 1
45. TCP_CHECK {
46. connect_timeout 10
47. nb_get_retry 3
48. connect_port 80
49. }
50. }
51. real_server 192.168.10.4 80 {
52. weight 1
53. TCP_CHECK {
54. connect_timeout 10
55. nb_get_retry 3
56. connect_port 80
57. }
58. }
59. }

BACKUP服务器同上配置，先安装lvs再按装keepalived,然后配置/etc/keepalived/keepalived.conf，只需将批注部分改一下即可。
4、分别在2台Real Server上面设置网关
把网关都设置成：192.168.10.10
5、在2台RealServer中分别配置HTTP
[root@host3 ~]# yum -y install httpd
[root@host3 ~]# cd /var/www/html/
[root@host3 html]# cat index.html
< h1>RealServer for 192.168.10.3</h1>
[root@host3 html]# /etc/init.d/httpd start
另一台机器配置一样，过程略、、、
6、测试：
分别启动Keepalived
[root@host1 ~]# chkconfig keepalived on
[root@host1 ~]# /etc/init.d/keepalived restart
[root@host1 ~]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.0.0.10:80 rr
-> 192.168.10.3:80 Masq 1 0 0
-> 192.168.10.4:80 Masq 1 0 0
先关闭LVS_Master的Keepalived，观察LVS_Backup的日志
[root@host2 ~]# tailf /var/log/messages
Mar 22 22:39:16 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Transition to MASTER STATE
Mar 22 22:39:16 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Entering MASTER STATE
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) setting protocol VIPs.
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Sending gratuitous ARPs on eth1 for 192.168.10.10
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.0.0.10
Mar 22 22:39:17 host2 Keepalived_healthcheckers: Netlink reflector reports IP 192.168.10.10 added
Mar 22 22:39:17 host2 Keepalived_healthcheckers: Netlink reflector reports IP 10.0.0.10 added
Mar 22 22:39:22 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Sending gratuitous ARPs on eth1 for 192.168.10.10
Mar 22 22:39:22 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.0.0.10
在测试机上访问：
在2台RealServer中分别配置HTTP
[root@host3 ~]# yum -y install httpd
[root@host3 ~]# cd /var/www/html/
[root@host3 html]# cat index.html
< h1>RealServer for 192.168.10.3</h1>
[root@host3 html]# /etc/init.d/httpd start
另一台机器配置一样，过程略、、、
7、测试：
分别启动Keepalived
[root@host1 ~]# chkconfig keepalived on
[root@host1 ~]# /etc/init.d/keepalived restart
[root@host1 ~]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.0.0.10:80 rr
-> 192.168.10.3:80 Masq 1 0 0
-> 192.168.10.4:80 Masq 1 0 0
先关闭LVS_Master的Keepalived，观察LVS_Backup的日志
[root@host2 ~]# tailf /var/log/messages
Mar 22 22:39:16 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Transition to MASTER STATE
Mar 22 22:39:16 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Entering MASTER STATE
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) setting protocol VIPs.
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Sending gratuitous ARPs on eth1 for 192.168.10.10
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Mar 22 22:39:17 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.0.0.10
Mar 22 22:39:17 host2 Keepalived_healthcheckers: Netlink reflector reports IP 192.168.10.10 added
Mar 22 22:39:17 host2 Keepalived_healthcheckers: Netlink reflector reports IP 10.0.0.10 added
Mar 22 22:39:22 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Sending gratuitous ARPs on eth1 for 192.168.10.10
Mar 22 22:39:22 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.0.0.10
在测试机上访问：

启动LVS_Master，在查看LVS_Backup日志
[root@host2 ~]# tailf /var/log/messages
Mar 22 22:51:50 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Received higher prio advert
Mar 22 22:51:50 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) Entering BACKUP STATE
Mar 22 22:51:50 host2 Keepalived_vrrp: VRRP_Instance(LAN_GATEWAY) removing protocol VIPs.
Mar 22 22:51:50 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Received higher prio advert
Mar 22 22:51:50 host2 Keepalived_healthcheckers: Netlink reflector reports IP 192.168.10.10 removed
Mar 22 22:51:50 host2 Keepalived_vrrp: VRRP_Instance(VI_1) Entering BACKUP STATE
Mar 22 22:51:50 host2 Keepalived_vrrp: VRRP_Instance(VI_1) removing protocol VIPs.
Mar 22 22:51:50 host2 Keepalived_healthcheckers: Netlink reflector reports IP 10.0.0.10 removed
一切访问正常~！

本文出自 “CrazyLinux工作室” 博客，请务必保留此出处http://crazylinux.blog.51cto.com/259244/813154

转载于:https://blog.51cto.com/caomacheng/870618