Qt之QHeaderView加入复选框

简述

前面分享了QTableView中怎样加入复选框。

本节主要介绍QTableView中的表头-QHeaderView加入复选框的功能，以下以水平表头为例。垂直表头相似！

效果

QHeaderView

源代码

TableHeaderView::TableHeaderView(Qt::Orientation orientation, QWidget *parent)
    : QHeaderView(orientation, parent),
      m_bPressed(false),
      m_bChecked(false),
      m_bTristate(false),
      m_bNoChange(false),
      m_bMoving(false)
{
    // setStretchLastSection(true);
    setHighlightSections(false);
    setMouseTracking(true);

    // 响应鼠标
    setSectionsClickable(true);
}

// 槽函数，用于更新复选框状态
void TableHeaderView::onStateChanged(int state)
{
    if (state == Qt::PartiallyChecked) {
        m_bTristate = true;
        m_bNoChange = true;
    } else {
        m_bNoChange = false;
    }

    m_bChecked = (state != Qt::Unchecked);
    update();
}

// 绘制复选框
void TableHeaderView::paintSection(QPainter *painter, const QRect &rect, int logicalIndex) const
{
    painter->save();
    QHeaderView::paintSection(painter, rect, logicalIndex);
    painter->restore();

    if (logicalIndex == CHECK_BOX_COLUMN)
    {
        QStyleOptionButton option;
        option.initFrom(this);

        if (m_bChecked)
            option.state |= QStyle::State_Sunken;

        if (m_bTristate && m_bNoChange)
            option.state |= QStyle::State_NoChange;
        else
            option.state |= m_bChecked ?

QStyle::State_On : QStyle::State_Off; if (testAttribute(Qt::WA_Hover) && underMouse()) { if (m_bMoving) option.state |= QStyle::State_MouseOver; else option.state &= ~QStyle::State_MouseOver; } QCheckBox checkBox; option.iconSize = QSize(20, 20); option.rect = rect; style()->drawPrimitive(QStyle::PE_IndicatorCheckBox, &option, painter, &checkBox); //style()->drawItemPixmap(painter, rect, Qt::AlignCenter, QPixmap(":/images/checkBoxChecked")); //style()->drawControl(QStyle::CE_CheckBox, &option, painter, this); } } // 鼠标按下表头 void TableHeaderView::mousePressEvent(QMouseEvent *event) { int nColumn = logicalIndexAt(event->pos()); if ((event->buttons() & Qt::LeftButton) && (nColumn == CHECK_BOX_COLUMN)) { m_bPressed = true; } else { QHeaderView::mousePressEvent(event); } } // 鼠标从表头释放。发送信号，更新model数据 void TableHeaderView::mouseReleaseEvent(QMouseEvent *event) { if (m_bPressed) { if (m_bTristate && m_bNoChange) { m_bChecked = true; m_bNoChange = false; } else { m_bChecked = !m_bChecked; } update(); Qt::CheckState state = m_bChecked ? Qt::Checked : Qt::Unchecked; emit stateChanged(state); } else { QHeaderView::mouseReleaseEvent(event); } m_bPressed = false; } // 鼠标滑过、离开，更新复选框状态 bool TableHeaderView::event(QEvent *event) { if (event->type() == QEvent::Enter || event->type() == QEvent::Leave) { QMouseEvent *pEvent = static_cast<QMouseEvent *>(event); int nColumn = logicalIndexAt(pEvent->x()); if (nColumn == CHECK_BOX_COLUMN) { m_bMoving = (event->type() == QEvent::Enter); update(); return true; } } return QHeaderView::event(event); }

接口说明

• onStateChanged
  槽函数，与model关联。当model的数据发生变化时，表头复选中状态也随之变化。

• paintSection
  绘制部分，主要用于绘制复选框，主要设置QStyleOptionButton的状态。然后通过QStyle的drawPrimitive绘制样式。

• mousePressEvent
  鼠标按下表头，设置被按下的标志为true。

• mouseReleaseEvent
  鼠标从表头释放。发送信号，更新model数据。

• event
  鼠标滑过、离开。更新复选框状态。

QAbstractTableModel

源代码

源代码过多，这里仅仅贴更改部分及新增部分，其他部分请參考：Qt之QTableView加入复选框（QAbstractItemDelegate）

// 设置表格项数据
bool TableModel::setData(const QModelIndex &index, const QVariant &value, int role)
{
    if (!index.isValid())
        return false;

    int nColumn = index.column();
    FileRecord record = m_recordList.at(index.row());
    switch (role)
    {
    case Qt::DisplayRole:
    {
        if (nColumn == File_PATH_COLUMN)
        {
            record.strFilePath = value.toString();

            m_recordList.replace(index.row(), record);
            emit dataChanged(index, index);
            return true;
        }
    }
    case Qt::CheckStateRole:
    case Qt::UserRole:
    {
        if (nColumn == CHECK_BOX_COLUMN)
        {
            record.bChecked = value.toBool();

            m_recordList.replace(index.row(), record);
            emit dataChanged(index, index);

            if (role == Qt::UserRole)
                onStateChanged();
            return true;
        }
    }
    default:
        return false;
    }
    return false;
}

// 复选状态改变，通知表头更新复选状态
void TableModel::onStateChanged()
{
    Qt::CheckState state = Qt::Unchecked;
    int nCount = m_recordList.count();
    int nSelectedCount = 0;
    FileRecord record;
    for (int i = 0; i < nCount; ++i)
    {
        record = m_recordList.at(i);
        if (record.bChecked)
            ++nSelectedCount;
    }

    if (nSelectedCount >= nCount)
    {
        state = Qt::Checked;
    }
    else if (nSelectedCount > 0)
    {
        state = Qt::PartiallyChecked;
    }

    emit stateChanged(state);
}

// 接收表头复选状态更新变化。改动表格复选状态
void TableModel::onStateChanged(int state)
{
    QModelIndex index;
    for (int i = 0; i < rowCount(); ++i)
    {
        index = this->index(i, CHECK_BOX_COLUMN);
        setData(index, state == Qt::Checked, Qt::CheckStateRole);
    }
}

接口说明

• setData
  设置表格项数据，关键代码：当role为Qt::UserRole时候，会调用onStateChanged()函数，来更新表头！

• onStateChanged
  复选状态改变，通知表头更新复选状态。

• onStateChanged(int state)
  槽函数，接收表头复选状态更新变化，改动表格复选状态。

使用

这时，就须要将header与model的信号与槽关联起来，更新复选框状态了！

QTableView *pTableView = new QTableView(this);
TableModel *pModel = new TableModel(this);
TableHeaderView *pHeader = new TableHeaderView(Qt::Horizontal, this);
CheckBoxDelegate *pDelegate = new CheckBoxDelegate(this);

pTableView->setHorizontalHeader(pHeader);
pTableView->setModel(pModel);
pTableView->setItemDelegate(pDelegate);

connect(pModel, SIGNAL(stateChanged(int)), pHeader, SLOT(onStateChanged(int)));
connect(pHeader, SIGNAL(stateChanged(int)), pModel, SLOT(onStateChanged(int)));