2008R2,2012R2修改IIS FTP 被动模式端口号

Applicable to: Plesk for Windows
Question
How to configure a passive FTP port range in Plesk for Windows?

Answer
The passive FTP ports configuration can be done either in Plesk interface or directly on the server.

Note: Allow inbound connections for the passive FTP port range on the firewall.
If Plesk is installed on a public cloud service, follow the instructions: for Amazon EC2, for Amazon Lightsail, for Google Cloud, for Microsoft Azure, for Alibaba Cloud.

In Plesk interface
1.Log into Plesk.

2.Go to Tools & Settings > FTP Settings and specify the passive FTP port range:

The default value is 49152-65535.

3.Click OK or Apply to save the changes.

Directly on the server

1.Connect to the server using RDP.

2.Specify passive FTP port range in IIS Manager:

2.1. Open Internet Information Service (IIS) Manager:

in Windows Server 2008 and 2008 R2: go to Start > Administrative Tools >     Internet Information Service (IIS) Manager.

in Windows Server 2012 and newer: go to Start > Server Manager > Tools     > Internet Information Service (IIS) Manager.

2.2. In IIS Manager, go to server_hostname > FTP Firewall Support:

2.3. Specify the passive FTP port range in the field Data Channel Port Range and click Apply to save the changes:

3.Restart Microsoft FTP Service:

3.1. Open the Services snap-in:

in Windows Server 2008 and 2008 R2: go to Start > Administrative Tools > Services.

in Windows Server 2012 and newer: go to Start > Server Manager > Tools > Services.

3.2. In the list, select Microsoft FTP Service and click Restart the service:

以上是原文，这是原文地址：
https://support.plesk.com/hc/en-us/articles/115003577753-How-to-configure-a-passive-FTP-port-range-in-Plesk-for-Windows-

转载于:https://blog.51cto.com/lrtao2010/2314006