5.7 其他好用的配置技巧
5.7.1 使用supervisord进行进程管理
Supervisord是一个优秀的进程管理工具，一般在部署redis时采用它来进行redis、sentinel等进程的管理，一个已经在生产环境采用的supervisord配置文件如下： ; Sample supervisor config file. ; ; For more information on the config file, please see: ; http://supervisord.org/configuration.html ; ; Notes: ; - Shell expansion ("~" or "$HOME") is not supported. Environment ; variables can be expanded using this syntax: "%(ENV_HOME)s". ; - Comments must have a leading space: "a=b ;comment" not "a=b;comment".
[unix_http_server]
file=/smsred/redis-3.0.4/run/supervisor.sock ; (the path to the socket file)
;chmod=0700 ; socket file mode (default 0700)
;chown=nobody:nogroup ; socket file uid:gid owner
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))
;[inet_http_server] ; inet (TCP) server disabled by default
;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface)
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))
[supervisord]
logfile=/smsred/redis-3.0.4/log/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10 ; (num of main logfile rotation backups;default 10)
loglevel=info ; (log level;default info; others: debug,warn,trace)
pidfile=/smsred/redis-3.0.4/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false ; (start in foreground if true;default false)
minfds=1024 ; (min. avail startup file descriptors;default 1024)
minprocs=200 ; (min. avail process descriptors;default 200)
;umask=022 ; (process file creation umask;default 022)
;user=chrism ; (default is current user, required if root)
;identifier=supervisor ; (supervisord identifier, default is 'supervisor')
;directory=/tmp ; (default is not to cd during start)
;nocleanup=true ; (don't clean up tempfiles at start;default false)
;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP)
;environment=KEY="value" ; (key value pairs to add to environment)
;strip_ansi=false ; (strip ansi escape codes in logs; def. false)
; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
[supervisorctl]
serverurl=unix:///smsred/redis-3.0.4/run/supervisor.sock ; use a unix:// URL for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris ; should be same as http_username if set
;password=123 ; should be same as http_password if set
;prompt=mysupervisor ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history ; use readline history if available
; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.
;[program:theprogramname]
;command=/bin/cat ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=999 ; the relative start priority (default 999)
;autostart=true ; start at supervisord start (default: true)
;autorestart=unexpected ; whether/when to restart (default: unexpected)
;startsecs=1 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false ; send stop signal to the UNIX process group (default false)
;killasgroup=false ; SIGKILL the UNIX process group (def false)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A="1",B="2" ; process environment additions (def no adds)
;serverurl=AUTO ; override serverurl computation (childutils)
; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more 'real'
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.
;[eventlistener:theeventlistenername]
;command=/bin/eventlistener ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;events=EVENT ; event notif. types to subscribe to (req'd)
;buffer_size=10 ; event buffer queue size (default 10)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=-1 ; the relative start priority (default -1)
;autostart=true ; start at supervisord start (default: true)
;autorestart=unexpected ; whether/when to restart (default: unexpected)
;startsecs=1 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false ; send stop signal to the UNIX process group (default false)
;killasgroup=false ; SIGKILL the UNIX process group (def false)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A="1",B="2" ; process environment additions
;serverurl=AUTO ; override serverurl computation (childutils)
; The below sample group section shows all possible group values,
; create one or more 'real' group: sections to create "heterogeneous"
; process groups.
;[group:thegroupname]
;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions
;priority=999 ; the relative start priority (default 999)
; The [include] section can just contain the "files" setting. This
; setting can list multiple files (separated by whitespace or
; newlines). It can also contain wildcards. The filenames are
; interpreted as relative to this file. Included files *cannot*
; include files themselves.
;[include]
;files = relative/directory/*.ini
[program:redis-1xxx]
command=/smsred/redis-3.0.4/bin/redis-server /smsred/redis-3.0.4/conf/redis-1xxx.conf
autostart=true
autorestart=false
user=smsred
stdout_logfile=/smsred/redis-3.0.4/log/redis-1xxx.out.log
stderr_logfile=/smsred/redis-3.0.4/log/redis-1xxx.err.log
priority=1000
[program:redis-1xxx]
command=/smsred/redis-3.0.4/bin/redis-server /smsred/redis-3.0.4/conf/redis-1xxx.conf
autostart=true
autorestart=false
user=smsred
stdout_logfile=/smsred/redis-3.0.4/log/redis-1xxx.out.log
stderr_logfile=/smsred/redis-3.0.4/log/redis-1xxx.err.log
priority=1000
[program:redis-1xxx]
command=/smsred/redis-3.0.4/bin/redis-server /smsred/redis-3.0.4/conf/redis-1xxx.conf
autostart=true
autorestart=false
user=smsred
stdout_logfile=/smsred/redis-3.0.4/log/redis-1xxx.out.log
stderr_logfile=/smsred/redis-3.0.4/log/redis-1xxx.err.log
priority=1000
[program:redis-sentinel]
command =/smsred/redis-3.0.4/bin/redis-sentinel /smsred/redis-3.0.4/conf/sentinel.conf
autostart=true
autorestart=true
startsecs=3
5.7.2 使用alias方便操作
如果开多实例，那么shell下进行操作的次数会很多，因此你需要一些alias进行命令的缩短，这个技巧并不高深，但是很实用。一个实例如下：
alias cli1='$HOME/redis-3.0.4/bin/redis-cli -a xxx -p 1xx'
alias cli2='$HOME/redis-3.0.4/bin/redis-cli -a xxx -p 1xx'
alias cli3='$HOME/redis-3.0.4/bin/redis-cli -a xxx -p 1xx'
alias clis='$HOME/redis-3.0.4/bin/redis-cli -p 26379'
alias sctl='supervisorctl -c $HOME/redis-3.0.4/conf/redis-supervisord.conf '
alias sstart='supervisord -c $HOME/redis-3.0.4/conf/redis-supervisord.conf'
alias see='pdsh -R ssh -w MSMSRED[1-3],PSMSRED1,PSMSAPP1 "/usr/local/bin/supervisorctl -c /smsred/redis-3.0.4/conf/redis-supervisord.conf status "'
5.7.3 使用pdsh/pdcp进行多机器操作
Pdsh/pdcp是一个python ssh多机操作的工具，在部署中可以采用它进行多机的同一操作批量执行，注意编译的时候把ssh编译进去，在执行时指定ssh模式，一个查看多机supervisord管理进程的命令实例如下：
pdsh -R ssh -w MSMSRED[1-3],PSMSRED1,PSMSAPP1 "/usr/local/bin/supervisorctl -c /smsred/redis-3.0.4/conf/redis-supervisord.conf status "
前提是你这些机器已经建立了ssh互信。建立互信可以用下边这个脚本
#!/bin/bash
#2015-12-08
#author gnuhpc
expect -c "spawn ssh-keygen -t rsa
expect {
\":\" {send \"\r\"; exp_continue}
\"*(y/n)*\" {send \"y\r\"; exp_continue}
}
"
for p in $(cat ip.cfg)
do
ip=$(echo "$p"|cut -f1 -d":")
username=$(echo "$p"|cut -f2 -d":")
password=$(echo "$p"|cut -f3 -d":")
echo $password
expect -c "
spawn ssh-copy-id ${username}@$ip
expect {
\"*yes/no*\" {send \"yes\r\"; exp_continue}
\"*(y/n)*\" {send \"y\r\"; exp_continue}
\"*password*\" {send \"$password\r\"; exp_continue}
\"*Password*\" {send \"$password\r\"; exp_continue}
}
"
expect -c "
spawn ssh ${username}@$ip "hostname"
expect {
\"*yes/no*\" {send \"yes\r\"; exp_continue}
\"*password*\" {send \"$password\r\"; exp_continue}
\"*(y/n)*\" {send \"y\r\"; exp_continue}
\"*Password*\" {send \"$password\r\";}
}
"
done
指定一个ip.cfg，里面的格式为：IP（主机名也行，只要能解析）:用户名:密码 例如：
xxxx.139:username:password
xxxx.140:username:password
xxxx.141:username:password
xxxx.142:username:password
xxxx.137:username:password
5.7.4 使用脚本进行sentinel配置文件的备份
Sentinel在启动、切换时会对config文件进行rewrite，在上线前或者某些手动维护后你可能希望把conf文件都变为最初，当系统中有很多redis实例时，这个手工操作会让人疯掉，那不妨写个脚本在配置好sentinel和redis后不启动先备份一下，测试完毕后再恢复。
一个简单的备份脚本如下：
backupconf.sh
#!/bin/bash
for i in `find ~/redis-3.0.4/conf -name *.conf`
do
cp -v $i ${i}.bak
done
恢复脚本：
扫一扫
426
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
