The Locust class
A locust class represents one user (or a swarming locust if you will). Locust will spawn (hatch) one instance of the locust class for each user that is being simulated. There are a few attributes that a locust class should typically define.
The task_set
attribute
The task_set
attribute should point to a TaskSet
class which defines the behaviour of the user and is described in more detail below.
The min_wait and max_wait attributes
In addition to the task_set attribute, one usually wants to declare the min_wait and max_wait attributes. These are the minimum and maximum time respectively, in milliseconds, that a simulated user will wait between executing each task. min_wait and max_wait default to 1000, and therefore a locust will always wait 1 second between each task if min_wait and max_wait are not declared.
With the following locustfile, each user would wait between 5 and 15 seconds between tasks:
from locust import Locust, TaskSet, task
class MyTaskSet(TaskSet):
@task
def my_task(self):
print "executing my_task"
class MyLocust(Locust):
task_set = MyTaskSet
min_wait = 5000
max_wait = 15000
The min_wait and max_wait attributes can also be overridden in a TaskSet class.
The weight attribute
You can run two locusts from the same file like so:
locust -f locust_file.py WebUserLocust MobileUserLocust
If you wish to make one of these locusts execute more often you can set a weight attribute on those classes. Say for example, web users are three times more likely than mobile users:
class WebUserLocust(Locust):
weight = 3
....
class MobileUserLocust(Locust):
weight = 1
....
TaskSet class
If the Locust class represents a swarming locust, you could say that the TaskSet class represents the brain of the locust. Each Locust class must have a task_set attribute set, that points to a TaskSet.
A TaskSet is, like its name suggests, a collection of tasks. These tasks are normal python callables and—if we were load-testing an auction website—could do stuff like “loading the start page”, “searching for some product” and “making a bid”.
When a load test is started, each instance of the spawned Locust classes will start executing their TaskSet. What happens then is that each TaskSet will pick one of its tasks and call it. It will then wait a number of milliseconds, chosen at random between the Locust class’ min_wait and max_wait attributes (unless min_wait/max_wait have been defined directly under the TaskSet, in which case it will use its own values instead). Then it will again pick a new task to be called, wait again, and so on.
Declaring tasks
The typical way of declaring tasks for a TaskSet it to use the task
decorator.
Here is an example:
from locust import Locust, TaskSet, task
class MyTaskSet(TaskSet):
@task
def my_task(self):
print "Locust instance (%r) executing my_task" % (self.locust)
class MyLocust(Locust):
task_set = MyTaskSet
@task takes an optional weight argument that can be used to specify the task’s execution ratio. In the following example task2 will be executed twice as much as task1:
class MyTaskSet(TaskSet):
min_wait = 5000
max_wait = 15000
@task(3)
def task1(self):
pass
@task(6)
def task2(self):
pass
class MyLocust(Locust):
task_set = MyTaskSet
tasks attribute
Using the @task decorator to declare tasks is a convenience, and usually the best way to do it. However, it’s also possible to define the tasks of a TaskSet by setting the tasks
attribute (using the @task decorator will actually just populate the tasks attribute).
The tasks attribute is either a list of python callables, or a <callable : int> dict. The tasks are python callables that receive one argument—the TaskSet class instance that is executing the task. Here is an extremely simple example of a locustfile (this locustfile won’t actually load test anything):
from locust import Locust, TaskSet
def my_task(l):
pass
class MyTaskSet(TaskSet):
tasks = [my_task]
class MyLocust(Locust):
task_set = MyTaskSet
If the tasks attribute is specified as a list, each time a task is to be performed, it will be randomly chosen from the tasks attribute. If however, tasks is a dict—with callables as keys and ints as values—the task that is to be executed will be chosen at random but with the int as ratio. So with a tasks that looks like this:
{my_task: 3, another_task:1}
my_task would be 3 times more likely to be executed than another_task.
TaskSets can be nested
A very important property of TaskSets is that they can be nested, because real websites are usually built up in an hierarchical way, with multiple sub-sections. Nesting TaskSets will therefore allow us to define a behaviour that simulates users in a more realistic way. For example we could define TaskSets with the following structure:
- Main user behaviour
- Index page
- Forum page
- Read thread
- Reply
- New thread
- View next page
- Browse categories
- Watch movie
- Filter movies
- About page
The way you nest TaskSets is just like when you specify a task using the tasks attribute, but instead of referring to a python function, you refer to another TaskSet:
class ForumPage(TaskSet):
@task(20)
def read_thread(self):
pass
@task(1)
def new_thread(self):
pass
@task(5)
def stop(self):
self.interrupt()
class UserBehaviour(TaskSet):
tasks = {ForumPage:10}
@task
def index(self):
pass
So in the above example, if the ForumPage would get selected for execution when the UserBehaviour TaskSet is executing, then the ForumPage TaskSet would start executing. The ForumPage TaskSet would then pick one of its own tasks, execute it, wait, and so on.
There is one important thing to note about the above example, and that is the call to self.interrupt() in the ForumPage’s stop method. What this does is essentially to stop executing the ForumPage task set and the execution will continue in the UserBehaviour instance. If we didn’t have a call to the interrupt()
method somewhere in ForumPage, the Locust would never stop running the ForumPage task once it has started. But by having the interrupt function, we can—together with task weighting—define how likely it is that a simulated user leaves the forum.
It’s also possible to declare a nested TaskSet, inline in a class, using the @task
decorator, just like when declaring normal tasks:
class MyTaskSet(TaskSet):
@task
class SubTaskSet(TaskSet):
@task
def my_task(self):
pass
The on_start function
A TaskSet class can optionally declare an on_start
function. If so, that function is called when a simulated user starts executing that TaskSet class.
Referencing the Locust instance, or the parent TaskSet instance
A TaskSet instance will have the attribute locust
point to its Locust instance, and the attribute parent
point to its parent TaskSet (it will point to the Locust instance, in the base TaskSet).
Making HTTP requests
So far, we’ve only covered the task scheduling part of a Locust user. In order to actually load test a system we need to make HTTP requests. To help us do this, the HttpLocust
class exists. When using this class, each instance gets a client
attribute which will be an instance of HttpSession
which can be used to make HTTP requests.
-
class
-
Represents an HTTP “user” which is to be hatched and attack the system that is to be load tested.
The behaviour of this user is defined by the task_set attribute, which should point to a
TaskSet
class.This class creates a client attribute on instantiation which is an HTTP client with support for keeping a user session between requests.
-
Instance of HttpSession that is created upon instantiation of Locust. The client support cookies, and therefore keeps the session between HTTP requests.
client
= None -
HttpLocust
When inheriting from the HttpLocust class, we can use its client attribute to make HTTP requests against the server. Here is an example of a locust file that can be used to load test a site with two URLs; / and /about/:
from locust import HttpLocust, TaskSet, task
class MyTaskSet(TaskSet):
@task(2)
def index(self):
self.client.get("/")
@task(1)
def about(self):
self.client.get("/about/")
class MyLocust(HttpLocust):
task_set = MyTaskSet
min_wait = 5000
max_wait = 15000
Using the above Locust class, each simulated user will wait between 5 and 15 seconds between the requests, and / will be requested twice as much as /about/.
The attentive reader will find it odd that we can reference the HttpSession instance using self.client inside the TaskSet, and not self.locust.client. We can do this because the TaskSet
class has a convenience property called client that simply returns self.locust.client.
Using the HTTP client
Each instance of HttpLocust has an instance of HttpSession
in the client attribute. The HttpSession class is actually a subclass of requests.Session
and can be used to make HTTP requests, that will be reported to Locust’s statistics, using the get
, post
, put
, delete
, head
, patch
and options
methods. The HttpSession instance will preserve cookies between requests so that it can be used to log in to websites and keep a session between requests. The client attribute can also be referenced from the Locust instance’s TaskSet instances so that it’s easy to retrieve the client and make HTTP requests from within your tasks.
Here’s a simple example that makes a GET request to the /about path (in this case we assume self is an instance of a TaskSet
or HttpLocust
class:
response = self.client.get("/about")
print "Response status code:", response.status_code
print "Response content:", response.content
And here’s an example making a POST request:
response = self.client.post("/login", {"username":"testuser", "password":"secret"})
Safe mode
The HTTP client is configured to run in safe_mode. What this does is that any request that fails due to a connection error, timeout, or similar will not raise an exception, but rather return an empty dummy Response object. The request will be reported as a failure in Locust’s statistics. The returned dummy Response’s content attribute will be set to None, and its status_code will be 0.
Manually controlling if a request should be considered successful or a failure
By default, requests are marked as failed requests unless the HTTP response code is OK (2xx). Most of the time, this default is what you want. Sometimes however—for example when testing a URL endpoint that you expect to return 404, or testing a badly designed system that might return 200 OK even though an error occurred—there’s a need for manually controlling if locust should consider a request as a success or a failure.
One can mark requests as failed, even when the response code is OK, by using the catch_response argument and a with statement:
with client.get("/", catch_response=True) as response:
if response.content != "Success":
response.failure("Got wrong response")
Just as one can mark requests with OK response codes as failures, one can also use catch_response argument together with a with statement to make requests that resulted in an HTTP error code still be reported as a success in the statistics:
with client.get("/does_not_exist/", catch_response=True) as response:
if response.status_code == 404:
response.success()
Grouping requests to URLs with dynamic parameters
It’s very common for websites to have pages whose URLs contain some kind of dynamic parameter(s). Often it makes sense to group these URLs together in Locust’s statistics. This can be done by passing a name argument to the HttpSession's
different request methods.
Example:
# Statistics for these requests will be grouped under: /blog/?id=[id]
for i in range(10):
client.get("/blog?id=%i" % i, name="/blog?id=[id]")
Common libraries
Often, people wish to group multiple locustfiles that share common libraries. In that case, it is important to define the project root to be the directory where you invoke locust, and it is suggested that all locustfiles live somewhere beneath the project root.
A flat file structure works out of the box:
- project root
commonlib_config.py
commonlib_auth.py
locustfile_web_app.py
locustfile_api.py
locustfile_ecommerce.py
The locustfiles may import common libraries using, e.g. import commonlib_auth
. This approach does not cleanly separate common libraries from locust files, however.
Subdirectories can be a cleaner approach (see example below), but locust will only import modules relative to the directory in which the running locustfile is placed. If you wish to import from your project root (i.e. the location where you are running the locust command), make sure to write sys.path.append(os.getcwd())
in your locust file(s) before importing any common libraries—this will make the project root (i.e. the current working directory) importable.
- project root
__init__.py
common/
__init__.py
config.py
auth.py
locustfiles/
__init__.py
web_app.py
api.py
ecommerce.py
With the above project structure, your locust files can import common libraries using:
sys.path.append(os.getcwd())
import common.auth
*from http://docs.locust.io/en/latest/writing-a-locustfile.html#the-locust-class