梳理源码中 View 的工作原理

欢迎Follow我的GitHub, 关注我的掘金.

在View的工作过程中, 执行三大流程完成显示, 测量(measure)流程, 布局(layout)流程, 绘制(draw)流程. 从performTraversals方法开始, 测量(measure)View的高度(Height)与宽度(Width), 布局(layout)View在父容器中的位置, 绘制(draw)View在屏幕上.

通过源码, 循序渐进, 解析View的工作原理和三大流程.

 

View

 

ViewRoot

ViewRoot连结WindowManager与DecorView, 调用流程performTraversals, 并依次调用performMeasure, performLayout, performDraw.

Measure调用onMeasure, Layout调用onLayout, Draw调用onDraw与dispatchDraw. Measure中, 调用getMeasuredHeight与getMeasuredWidth获取绘制好的高度与宽度; Layout中, 调用getHeight与getWidth获取布局好的高度与宽度. 注意因时机不同, Measure的度量可能不同于Layout的度量.

Measure与Layout使用onMeasure与onLayout遍历调用子View的方法. Draw使用onDraw绘制View本身, 使用onDispatch绘制子View.

DecorView

DecorView是顶层View, 即FrameLayout, 其中包含竖直方向的LinearLayout, 标题titlebar, 内容android.R.id.content. 获取setContentView的布局的方法.

ViewGroup content = (ViewGroup) findViewById(android.R.id.content); // 父布局
View view = content.getChildAt(0); // 内容布局

MeasureSpec

View的MeasureSpec, MeasureSpec是32位int值, 高2位是SpecMode, 低30位是SpecSize, 选择测量的模式, 设置测量的大小.

SpecMode三种类型, UNSPECIFIED不做任何限制; EXACTLY精确大小, 即match_parent和具体数值; AT_MOST不能超过最大距离, 即wrap_content.

在onMeasure中, View使用MeasureSpec测量View的大小, 由父布局的MeasureSpec与自身的LayoutParams决定; DecorView是根View, 由系统的窗口尺寸与自身的LayoutParams决定.

父View负责绘制子View, 子View的大小由父View的模式与大小与自身的模式与大小决定. 简而言之, 父容器的MeasureSpec与子View的LayoutParams决定子View的MeasureSpec.

Measure

Measure测量View的高度与宽度. View调用onMeasure完成测量; ViewGroup遍历子View的onMeasure, 再递归汇总.

View

View的measure方法是禁止继承的, 调用onMeasure方法, 自定义View通过onMeasure方法设置测量大小. onMeasure方法调用setMeasuredDimension设置测量大小.

protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec), getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec)); }

宽与高使用getDefaultSize获取默认值, 参数是推荐最小值(getSuggestedMinimumX)与指定测量规格(xMeasureSpec).

public static int getDefaultSize(int size, int measureSpec) { int result = size; int specMode = MeasureSpec.getMode(measureSpec); int specSize = MeasureSpec.getSize(measureSpec); switch (specMode) { case MeasureSpec.UNSPECIFIED: result = size; break; case MeasureSpec.AT_MOST: case MeasureSpec.EXACTLY: result = specSize; break; } return result; }

注意AT_MOST模式, 使用最小宽度, 当未设置时, 使用父容器的最大值, 因此自定义View需要设置默认值, 否者wrap_content与match_parent功能相同.

参考ViewGroup. 当子View的布局参数是WRAP_CONTENT时, 无论父View的类型, 都是父View的空闲值.

public static int getChildMeasureSpec(int spec, int padding, int childDimension) { int specMode = MeasureSpec.getMode(spec); int specSize = MeasureSpec.getSize(spec); int size = Math.max(0, specSize - padding); // 最大空闲值 int resultSize = 0; int resultMode = 0; switch (specMode) { // Parent has imposed an exact size on us case MeasureSpec.EXACTLY: // ... } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be // bigger than us. resultSize = size; // 父View空闲宽度 resultMode = MeasureSpec.AT_MOST; } break; // Parent has imposed a maximum size on us case MeasureSpec.AT_MOST: // ... } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be // bigger than us. resultSize = size; // 父View空闲宽度 resultMode = MeasureSpec.AT_MOST; } break; // ... } return MeasureSpec.makeMeasureSpec(resultSize, resultMode); }

自定义View需要设置wrap_content状态下的测量值, 可以参考TextView与ImageView.

private int mMinWidth = 256; // 指定默认最小宽度
private int mMinHeight = 256; // 指定默认最小高度 @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { super.onMeasure(widthMeasureSpec, heightMeasureSpec); int widthSpecMode = MeasureSpec.getMode(widthMeasureSpec); int widthSpecSize = MeasureSpec.getSize(widthMeasureSpec); int heightSpecMode = MeasureSpec.getMode(heightMeasureSpec); int heightSpecSize = MeasureSpec.getSize(heightMeasureSpec); if (widthSpecMode == MeasureSpec.AT_MOST && heightSpecMode == MeasureSpec.AT_MOST) { setMeasuredDimension(mMinWidth, mMinHeight); } else if (widthSpecMode == MeasureSpec.AT_MOST) { setMeasuredDimension(mMinWidth, heightSpecSize); } else if (heightSpecMode == MeasureSpec.AT_MOST) { setMeasuredDimension(widthSpecSize, mMinHeight); } }

获取建议的最小宽度, 在已设置最小宽度android:minWidth与背景android:background的最小宽度的最大值, 默认返回0.

protected int getSuggestedMinimumWidth() { return (mBackground == null) ? mMinWidth : max(mMinWidth, mBackground.getMinimumWidth()); }

ViewGroup

ViewGroup使用onMeasure绘制自己, 并遍历子View的onMeasure递归绘制.

使用measureChildren方法绘制全部子View.

protected void measureChildren(int widthMeasureSpec, int heightMeasureSpec) { final int size = mChildrenCount; final View[] children = mChildren; for (int i = 0; i < size; ++i) { final View child = children[i]; if ((child.mViewFlags & VISIBILITY_MASK) != GONE) { measureChild(child, widthMeasureSpec, heightMeasureSpec); } } }

子View绘制使用measureChild, 最终汇总.

protected void measureChildWithMargins(View child,
        int parentWidthMeasureSpec, int widthUsed,
        int parentHeightMeasureSpec, int heightUsed) {
    final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();

    final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
            mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin
                    + widthUsed, lp.width);
    final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
            mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin
                    + heightUsed, lp.height);

    child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}

不同的ViewGroup实现不同的onMeasure方法, 如LinearLayout, RelativeLayout, FrameLayout等.

测量值

View的onMeasure与Activity的生命周期不一致, 无法在生命周期的方法中, 获取测量值. 测量值需要在测量完成后计算.

onWindowFocusChanged方法, 在Activity窗口获得或失去焦点时都会被调用, 即在onResume与onPause执行时会调用, 此时, View的测量(Measure)已经完成, 获取测量值.

private int mWidth; // 宽度
private int mHeight; // 高度 /** * 在Activity获得焦点时, 获取测量宽度与高度 * * @param hasFocus 关注 */ @Override public void onWindowFocusChanged(boolean hasFocus) { super.onWindowFocusChanged(hasFocus); if (hasFocus) { mWidth = getContentView().getMeasuredWidth(); mHeight = getContentView().getMeasuredHeight(); } } /** * 获取Activity的ContentView * * @return ContentView */ private View getContentView() { ViewGroup view = (ViewGroup) getWindow().getDecorView(); FrameLayout content = (FrameLayout) view.getChildAt(0); return content.getChildAt(0); }

在View的消息队列尾部, 获取测量值. View的测量过程是在消息队列中完成的, 完成全部的系统消息, 才会执行用户消息.

private int mWidth; // 宽度
private int mHeight; // 高度 @Override protected void onResume() { super.onResume(); final View view = getContentView(); view.post(new Runnable() { @Override public void run() { mWidth = view.getMeasuredWidth(); mHeight = view.getMeasuredHeight(); } }); }

Layout

View使用layout确定位置, layout调用onLayout, 在onLayout中调用子View的layout.

layout先调用setFrame确定View的四个顶点, 即left, right, top, bottom, 再调用onLayout确定子View的位置. 在onLayout中, 调用setChildFrame确定子View的四个顶点, 子View再调用layout.

在一般情况下, View的测量(Measure)宽高与布局(Layout)宽高是相同的, 确定时机不同, 测量要早于布局.

如果在View的layout中, 重新设置宽高, 则测量宽高与布局不同, 不过此类方法, 并无任何意义.

@Override public void layout(int l, int t, int r, int b) { super.layout(l, t, r + 256, b + 256); // 右侧底部, 各加256, 无意义 }

Draw

View的绘制(Draw)过程, 首先绘制背景, 即android:backgroud; 其次绘制自己, 即onDraw; 再次绘制子View, 即dispatchDraw; 最后绘制页面装饰, 如滚动条.

public void draw(Canvas canvas) { // ... /* * Draw traversal performs several drawing steps which must be executed * in the appropriate order: * * 1. Draw the background * 2. If necessary, save the canvas' layers to prepare for fading * 3. Draw view's content * 4. Draw children * 5. If necessary, draw the fading edges and restore layers * 6. Draw decorations (scrollbars for instance) */ // Step 1, draw the background, if needed int saveCount; // 第一步, 绘制背景 if (!dirtyOpaque) { drawBackground(canvas); } // skip step 2 & 5 if possible (common case) final int viewFlags = mViewFlags; boolean horizontalEdges = (viewFlags & FADING_EDGE_HORIZONTAL) != 0; boolean verticalEdges = (viewFlags & FADING_EDGE_VERTICAL) != 0; if (!verticalEdges && !horizontalEdges) { // Step 3, draw the content // 第二步, 绘制自己的内容 if (!dirtyOpaque) onDraw(canvas); // Step 4, draw the children // 第三步, 绘制子View dispatchDraw(canvas); // Step 6, draw decorations (scrollbars) // 第四步, 绘制装饰 onDrawScrollBars(canvas); if (mOverlay != null && !mOverlay.isEmpty()) { mOverlay.getOverlayView().dispatchDraw(canvas); } // we're done... return; } // ... }

关注源码的绘制draw流程: drawBackground -> onDraw -> dispatchDraw -> onDrawScrollBars

---

View的工作原理来源于三大流程, 测量(measure)流程, 布局(layout)流程, 绘制(draw)流程. 通过源码理解View的三大流程, 有利于提升程序设计理念, 与开发质量.

That's all! Enjoy it!