asa
asa(config)# dir                                                                                           
 //显示文件目录
 
copy disk0:/asa707-k8.bin tftp://192.168.1.149/ asa707-k8.bin      
//将原有IOS文件备份到TFTP服务器上
 
copy disk0:/asdm507.bin tftp://192.168.1.149/asdm507.bin          
//将原有asdm文件备份到TFTP服务器上
 
copy tftp://192.168.1.149/asa803-k8.bin disk0:/asa803-k8.bin      
 //将新的IOS文件从TFTP服务器上拷贝到ASA中
 
copy tftp://192.168.1.149/asdm-603.bin disk0:/asdm-603.bin       
//将新的IOS文件从TFTP服务器上拷贝到ASA中
 
asa(config)# dir                                                                                         
 //再次显示目录，检查文件是否拷贝成功
 
asa(config)# no boot system disk0:/asa707-k8.bin                             
//取消原来的启动文件关联
 
asa(config)# dir
asa(config)# boot system disk0:/asa803-k8.bin
asa(config)# asdm p_w_picpath disk0:/asdm-603.bin                                  
//设置IOS文件及ASDM文件的关联
 
Device Manager p_w_picpath set, but not a valid p_w_picpath file disk0:/asdm-603.bin
//由于新的IOS文件在重新启动前并未生效，所以会提示新的ASDM镜像在设置关联的时候会提示无效。
 
asa(config)# exit
 
asa# wr                                                                                                     
//保存配置
 
asa# reload                                                                                             
//重新启动路由器之前新的IOS不会生效