[S9306-GigabitEthernet2/0/42]dis this
#
interface GigabitEthernet2/0/42  原先的为trunk，
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet2/0/42 现在改为access
undo port trunk  allow-pass vlan  all
port trunk allow-pass vlan 1
port link-type access
port  default vlan 10


使用undo port trunk  allow-pass vlan  all命令时会将默认的Vlan 1也会undo掉，

所以必须再执行一次port trunk allow-pass vlan 1

或者使用下面的命令也可以：

#

interface GigabitEthernet0/0/26    原先的为trunk

 port link-type trunk

 port trunk allow-pass vlan 2 to 4094


#

undo port trunk allow-pass vlan 2 to 4094 先undo掉2-4094

undo port link-type 再undo掉trunk

port link-type access 设置为access
port  default vlan 10 设置默认VLAN