Puppet模块(八)：keepalived模块

一、模块说明

    keepalived是为了实现nginx的高可用性，在安装了nginx的两台机子上分别部署keepalived-master和keepalived-slave，会给两台机子的eth0增加两个虚拟ip（10.188.1.51,10.188.1.52)，将网站域名的DNS指向这两个VIP，或者是出口路由器端口映射向这两个VIP

    当任一台机子故障或chk_nginx.sh检测到其主机上的nginx故障时，VIP都会自动漫游到另一台正常的机子，可以扩展到更多台机子。

二、目录结构

    

三、代码展示

1、files目录

    chk_nginx.sh     #检查nginx服务状态的脚本

#!/bin/sh
# check nginx server status
A=`ps -C nginx -no-header |wc -l`
if [ $A -eq 0 ];then
/usr/sbin/nginx
sleep 3
if [ `ps -C nginx --no-header |wc -l` -eq 0 ];then
killall keepalived
fi
fi

    keepalived-1.2.7.tar.gz     #安装包下载 http://www.keepalived.org/software/keepalived-1.2.7.tar.gz

2、manifests目录

    init.pp

class keepalived {
    include keepalived::install,keepalived::config,keepalived::service
}

    install.pp

class keepalived::install {
  Exec{  path => ['/usr/bin','/usr/sbin','/bin'] }
  package { ['openssl-devel','popt-devel']:
     ensure => installed,
     before => Exec['install'],
  }
  file { '/etc/keepalived':
      ensure  => directory,
  } 
  file { 'keepalived':
      name    => '/usr/local/src/keepalived-1.2.7.tar.gz',
      ensure  => file,
      source  => 'puppet:///modules/keepalived/keepalived-1.2.7.tar.gz',
      owner   => root,
      group   => root,
      mode    => '0640',
      require => Package[['openssl-devel','popt-devel']],
  }
  exec { 'tar':
      command     => 'tar -zxf keepalived-1.2.7.tar.gz',
      cwd         => '/usr/local/src',
      refreshonly => true,
      subscribe   => File['keepalived'],
      before      => Exec['install'],
  }
  exec { 'install':
      command     => '/bin/bash configure && make && make install',
      cwd         => '/usr/local/src/keepalived-1.2.7',
      creates     => '/usr/local/sbin/keepalived',
  }
}

    config.pp    # $keepalived_conf参数可在foreamen的主机属性里设置，或节点site.pp里设置

class keepalived::config {  
    case $keepalived_conf  { 
        master: {
            file { '/etc/keepalived/keepalived.conf':
                ensure  => file,
                owner   => root,
                group   => root,
                mode    => 400,
                content => template("keepalived/keepalived-master.conf.erb"),
                notify  => Class['keepalived::service'],
                require => Class['keepalived::install'],
            }
        }
        slave: {
            file { '/etc/keepalived/keepalived.conf':
                ensure  => file,
                owner   => root,
                group   => root,
                mode    => 400,
                content => template("keepalived/keepalived-slave.conf.erb"),
                notify  => Class['keepalived::service'],
                require => Class['keepalived::install'],
            }  
        }
    }
    file { "/usr/sbin/keepalived":
        ensure  => link,
        target  => "/usr/local/sbin/keepalived",
        owner   => root,
        group   => root,
        mode    => 755,
        require => Class['keepalived::install'],
    }
    file { "/etc/rc.d/init.d/keepalived":
        ensure  => link,
        target  => "/usr/local/etc/rc.d/init.d/keepalived",
        owner   => root,
        group   => root,
        mode    => 755,
        require => Class['keepalived::install'],
    }
    file { "/etc/sysconfig/keepalived":
        ensure  => link,
        target  => "/usr/local/etc/sysconfig/keepalived",
        owner   => root,
        group   => root,
        mode    => 755,
        require => Class['keepalived::install'],
    }
    file { '/usr/local/nginx':
        ensure  => directory,
        before  => File['/usr/local/nginx/chk_nginx.sh'],
    } 
    file { '/usr/local/nginx/chk_nginx.sh':
        ensure  => file,
        owner   => root,
        group   => root,
        mode    => 755,
        source  => "puppet:///modules/keepalived/chk_nginx.sh",
        require => Class['keepalived::install'],
    }
}

    service.pp

class keepalived::service {
    service { 'keepalived': 
        ensure     => 'running',
        enable     => 'true',
        hasrestart => 'true',
        hasstatus  => 'true',
        require    => Class["keepalived::install"],
    }
}

3、templates目录

    keepalived-master.conf.erb    #根据情况修改邮箱、密码、IP

! Configuration File for keepalived
global_defs {
notification_email {
        yourmail@ewin.com 
   }
   notification_email_from keepalived@ewin.com 
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL 
}
vrrp_script chk_nginx {
    script "/usr/local/nginx/chk_nginx.sh"
    interval 2
    weight 2
}
track_script {
    chk_nginx
}
vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 100
    advert_int 1 
    authentication {
        auth_type PASS
        auth_pass mypassword
    }
    virtual_ipaddress {
        10.188.1.51
    }
}
vrrp_instance VI_2 {
    state BECKUP
    interface eth0 
    virtual_router_id 52
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass mypassword
    }
    virtual_ipaddress {
        10.188.1.52
    }
}

    keepalived-slave.conf.erb   

! Configuration File for keepalived
global_defs {
notification_email {
        yourmail@ewin.com 
   }
   notification_email_from keepalived@ewin.com 
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL 
}
vrrp_script chk_nginx {
    script "/usr/local/nginx/chk_nginx.sh"
    interval 2
    weight 2
}
track_script {
    chk_nginx
}
vrrp_instance VI_1 {
    state BECKUP
    interface eth0
    virtual_router_id 51
    priority 99
    advert_int 1 
    authentication {
        auth_type PASS
        auth_pass mypassword
    }
    virtual_ipaddress {
        10.188.1.51
    }
}
vrrp_instance VI_2 {
    state MASTER
    interface eth0 
    virtual_router_id 52
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass mypassword
    }
    virtual_ipaddress {
        10.188.1.52
    }
}

    

四、Foreman配置

    导入模块

    我这里在配置－配置组中将nginx和keepalived放在了一个组里，然后编辑主机，给其分配该组：

    给主机添加一个参数，指定其使用哪个配置文件：

    搜索添加了模块的nginx主机，手动运行Puppet：

五、查看结果

    在客户端主机上查看VIP

[root@com-nginx-master-33 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu16436 qdisc noqueue state UNKNOWN
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
   inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen1000
   link/ether 72:cc:7f:ea:b9:97 brd ff:ff:ff:ff:ff:ff
   inet 10.188.1.32/8 brd 10.255.255.255 scope global eth0
   inet 10.188.1.51/32 scope global eth0
   inet 10.188.1.52/32 scope global eth0
   inet6 fe80::70cc:7fff:feea:b997/64 scope link
      valid_lft forever preferred_lft forever

    可以看到eth0接口上多了两个VIP，接下来可以实验停止某台nginx或关机，观察VIP的变化。

转载于:https://blog.51cto.com/ywzhou/1754318