scrcpy (v1.12.1)
This application provides display and control of Android devices connected on
USB (or over TCP/IP). It does not require any root access.
It works on GNU/Linux, Windows and macOS.
It focuses on:
lightness (native, displays only the device screen)
performance (30~60fps)
quality (1920×1080 or above)
low latency (35~70ms)
low startup time (~1 second to display the first image)
non-intrusiveness (nothing is left installed on the device)
Requirements
The Android device requires at least API 21 (Android 5.0).
Make sure you enabled adb debugging on your device(s).
On some devices, you also need to enable an additional option to
control it using keyboard and mouse.
Get the app
Linux
In Debian (testing and sid for now):
apt install scrcpy
A Snap package is available: scrcpy.
For Arch Linux, an AUR package is available: scrcpy.
For Gentoo, an Ebuild is available: scrcpy/.
You could also build the app manually (don't worry, it's not that
hard).
Windows
For Windows, for simplicity, prebuilt archives with all the dependencies
(including adb) are available:
scrcpy-win32-v1.12.1.zip
(SHA-256: 0f4b3b063536b50a2df05dc42c760f9cc0093a9a26dbdf02d8232c74dab43480)
scrcpy-win64-v1.12.1.zip
(SHA-256: 57d34b6d16cfd9fe169bc37c4df58ebd256d05c1ea3febc63d9cb0a027ab47c9)
It is also available in Chocolatey:
choco installscrcpy
You need adb, accessible from your PATH. If you don't have it yet:
choco installadb
macOS
The application is available in Homebrew. Just install it:
brew installscrcpy
You need adb, accessible from your PATH. If you don't have it yet:
brew cask installandroid-platform-tools
Run
Plug an Android device, and execute:
scrcpy
It accepts command-line arguments, listed by:
scrcpy --help
Features
Capture configuration
Reduce size
Sometimes, it is useful to mirror an Android device at a lower definition to
increase performance.
To limit both the width and height to some value (e.g. 1024):
scrcpy --max-size 1024
scrcpy -m 1024 # short version
The other dimension is computed to that the device aspect ratio is preserved.
That way, a device in 1920×1080 will be mirrored at 1024×576.
Change bit-rate
The default bit-rate is 8 Mbps. To change the video bitrate (e.g. to 2 Mbps):
scrcpy --bit-rate 2M
scrcpy -b 2M # short version
Limit frame rate
On devices with Android >= 10, the capture frame rate can be limited:
scrcpy --max-fps 15
Crop
The device screen may be cropped to mirror only part of the screen.
This is useful for example to mirror only one eye of the Oculus Go:
scrcpy --crop 1224:1440:0:0 # 1224x1440 at offset (0,0)
If --max-size is also specified, resizing is applied after cropping.
Recording
It is possible to record the screen while mirroring:
scrcpy --record file.mp4
scrcpy -r file.mkv
To disable mirroring while recording:
scrcpy --no-display --record file.mp4
scrcpy -Nr file.mkv
# interrupt recording with Ctrl+C
# Ctrl+C does not terminate properly on Windows, so disconnect the device
"Skipped frames" are recorded, even if they are not displayed in real time (for
performance reasons). Frames are timestamped on the device, so packet delay
variation does not impact the recorded file.
Connection
Wireless
Scrcpy uses adb to communicate with the device, and adb can connect to a
device over TCP/IP:
Connect the device to the same Wi-Fi as your computer.
Get your device IP address (in Settings → About phone → Status).
Enable adb over TCP/IP on your device: adb tcpip 5555.
Unplug your device.
Connect to your device: adb connect DEVICE_IP:5555 (replace DEVICE_IP).
Run scrcpy as usual.
It may be useful to decrease the bit-rate and the definition:
scrcpy --bit-rate 2M --max-size 800
scrcpy -b2M -m800 # short version
Multi-devices
If several devices are listed in adb devices, you must specify the serial:
scrcpy --serial 0123456789abcdef
scrcpy -s 0123456789abcdef # short version
If the device is connected over TCP/IP:
scrcpy --serial 192.168.0.1:5555
scrcpy -s 192.168.0.1:5555 # short version
You can start several instances of scrcpy for several devices.
SSH tunnel
To connect to a remote device, it is possible to connect a local adb client to
a remote adb server (provided they use the same version of the adb
protocol):
adb kill-server # kill the local adb server on 5037
ssh -CN -L5037:localhost:5037 -R27183:localhost:27183 your_remote_computer
# keep this open
From another terminal:
scrcpy
Like for wireless connections, it may be useful to reduce quality:
scrcpy -b2M -m800 --max-fps 15
Window configuration
Title
By default, the window title is the device model. It can be changed:
scrcpy --window-title 'My device'
Position and size
The initial window position and size may be specified:
scrcpy --window-x 100 --window-y 100 --window-width 800 --window-height 600
Borderless
To disable window decorations:
scrcpy --window-borderless
Always on top
To keep the scrcpy window always on top:
scrcpy --always-on-top
Fullscreen
The app may be started directly in fullscreen:
scrcpy --fullscreen
scrcpy -f # short version
Fullscreen can then be toggled dynamically with Ctrl+f.
Other mirroring options
Read-only
To disable controls (everything which can interact with the device: input keys,
mouse events, drag&drop files):
scrcpy --no-control
scrcpy -n
Turn screen off
It is possible to turn the device screen off while mirroring on start with a
command-line option:
scrcpy --turn-screen-off
scrcpy -S
Or by pressing Ctrl+o at any time.
To turn it back on, press POWER (or Ctrl+p).
Render expired frames
By default, to minimize latency, scrcpy always renders the last decoded frame
available, and drops any previous one.
To force the rendering of all frames (at a cost of a possible increased
latency), use:
scrcpy --render-expired-frames
Show touches
For presentations, it may be useful to show physical touches (on the physical
device).
Android provides this feature in Developers options.
Scrcpy provides an option to enable this feature on start and disable on exit:
scrcpy --show-touches
scrcpy -t
Note that it only shows physical touches (with the finger on the device).
Input control
Rotate device screen
Press Ctrl+r to switch between portrait and landscape modes.
Note that it rotates only if the application in foreground supports the
requested orientation.
Copy-paste
It is possible to synchronize clipboards between the computer and the device, in
both directions:
Ctrl+c copies the device clipboard to the computer clipboard;
Ctrl+Shift+v copies the computer clipboard to the device clipboard;
Ctrl+v pastes the computer clipboard as a sequence of text events (but
breaks non-ASCII characters).
Text injection preference
There are two kinds of events generated when typing text:
key events, signaling that a key is pressed or released;
text events, signaling that a text has been entered.
By default, letters are injected using key events, so that the keyboard behaves
as expected in games (typically for WASD keys).
But this may cause issues. If you encounter such a problem, you
can avoid it by:
scrcpy --prefer-text
(but this will break keyboard behavior in games)
File drop
Install APK
To install an APK, drag & drop an APK file (ending with .apk) to the scrcpy
window.
There is no visual feedback, a log is printed to the console.
Push file to device
To push a file to /sdcard/ on the device, drag & drop a (non-APK) file to the
scrcpy window.
There is no visual feedback, a log is printed to the console.
The target directory can be changed on start:
scrcpy --push-target /sdcard/foo/bar/
Audio forwarding
Audio is not forwarded by scrcpy. Use USBaudio (Linux-only).
Also see issue #14.
Shortcuts
Action
Shortcut
Shortcut (macOS)
Switch fullscreen mode
Ctrl+f
Cmd+f
Resize window to 1:1 (pixel-perfect)
Ctrl+g
Cmd+g
Resize window to remove black borders
Ctrl+x | Double-click¹
Cmd+x | Double-click¹
Click on HOME
Ctrl+h | Middle-click
Ctrl+h | Middle-click
Click on BACK
Ctrl+b | Right-click²
Cmd+b | Right-click²
Click on APP_SWITCH
Ctrl+s
Cmd+s
Click on MENU
Ctrl+m
Ctrl+m
Click on VOLUME_UP
Ctrl+↑ (up)
Cmd+↑ (up)
Click on VOLUME_DOWN
Ctrl+↓ (down)
Cmd+↓ (down)
Click on POWER
Ctrl+p
Cmd+p
Power on
Right-click²
Right-click²
Turn device screen off (keep mirroring)
Ctrl+o
Cmd+o
Rotate device screen
Ctrl+r
Cmd+r
Expand notification panel
Ctrl+n
Cmd+n
Collapse notification panel
Ctrl+Shift+n
Cmd+Shift+n
Copy device clipboard to computer
Ctrl+c
Cmd+c
Paste computer clipboard to device
Ctrl+v
Cmd+v
Copy computer clipboard to device
Ctrl+Shift+v
Cmd+Shift+v
Enable/disable FPS counter (on stdout)
Ctrl+i
Cmd+i
¹Double-click on black borders to remove them.
²Right-click turns the screen on if it was off, presses BACK otherwise.
Custom paths
To use a specific adb binary, configure its path in the environment variable
ADB:
ADB=/path/to/adb scrcpy
To override the path of the scrcpy-server file, configure its path in
SCRCPY_SERVER_PATH.
Why scrcpy?
A colleague challenged me to find a name as unpronounceable as gnirehtet.
strcpy copies a string; scrcpy copies a screen.
How to build?
Common issues
See the FAQ.
Developers
Licence
Copyright (C) 2018 Genymobile
Copyright (C) 2018-2020 Romain Vimont
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Articles
1135
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
