CSR8670蓝牙串口通信--UART

      最近一直在学习CSR8670蓝牙芯片的开发，这方面的学习资料少的可怜，学习过程也很单一。我的主要学习过程：逛各种蓝牙学习论坛、阅读ADK安装包中的英文文档、请教各位硬件软件大牛，对于从未接触过硬件开发的我来说，过程真心痛苦。最近刚刚调通利用UART协议实现蓝牙串口通信的代码，Mark一下，也跟大家分享一下，请大家多多指教！

编译环境：ADK3.5

uart.h

 1 #include <panic.h>
 2 #include <stddef.h>
 3 #include <led.h>
 4 #include <string.h>
 5 #include <stream.h>
 6 #include <message.h>
 7 
 8 #ifndef UARTDEMO_H
 9 #define UARTDEMO_H
10 typedef struct
11 {
12 
13         TaskData uart_task;
14        
15 }Uart_TaskDataTest;
16 
17 enum
18 {   
19         SEND_UART_DATA
20 };
21 
22 void PilAppUARTInit(void);
23 
24 void uart_send(const char *data, uint16 lenth);
25 
26 void uart_handler(Task task, MessageId id, Message message);
27 
28 void uart_rev(void);
29 #endif

 uart.c

 1 #include <panic.h>
 2 #include <stddef.h>
 3 #include <led.h>
 4 #include <string.h>
 5 #include <stream.h>
 6 #include <message.h>
 7 #include "uart.h"
 8 #include "sink_private.h"
 9 
10 
11 void PilAppUARTInit(void)
12 {
13         int lSize = sizeof(Uart_TaskDataTest) ; 
14         theSink.UART_Task = mallocPanic(lSize);
15         memset(theSink.UART_Task, 0, lSize); 
16         theSink.UART_Task->uart_task.handler = uart_handler;
17         MessageSinkTask(StreamUartSink(),&theSink.UART_Task->uart_task);        
18 
19         StreamUartConfigure(VM_UART_RATE_9K6 ,VM_UART_STOP_ONE,VM_UART_PARITY_NONE);
20 }
21 
22 void uart_send(const char *data, uint16 lenth)
23 {   
24            Sink uart = StreamUartSink();
25         if (uart == 0)
26         {
27                 return;           
28         }
29         
30            if(SinkClaim(uart, lenth) != 0xFFFF)
31        {
32                memcpy(SinkMap(uart), data, lenth);
33                (void) PanicZero(SinkFlush(uart, lenth));
34       }
35         
36 }
37 void uart_rev(void) 
38 {
39     Source src=StreamUartSource();
40     uint16  size=SourceSize(src);
41     SourceDrop(src, size);   
42       
43 }
44 
45 
46 void uart_handler(Task task, MessageId id, Message message)
47 {
48    switch(id)
49    { 
50         case MESSAGE_MORE_DATA: 
51             uart_rev();
52             break;               
53         default:
54              break;
55     }
56 }

 sink_private.h的结构体hsTaskData中添加：Uart_TaskDataTest          *UART_Task;

main.c中添加：PilAppUARTInit();

修改配置：sink工程->Properties->Bulid System->Transport选择：Raw

转载于:https://www.cnblogs.com/BigPotato-HW/p/5121395.html