Had a problem while installing Python package
...
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
augeas-lenses is already the newest version.
ca-certificates is already the newest version.
dialog is already the newest version.
gcc is already the newest version.
libaugeas0 is already the newest version.
libffi-dev is already the newest version.
libssl-dev is already the newest version.
python is already the newest version.
python-dev is already the newest version.
python-virtualenv is already the newest version.
virtualenv is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Checking for new version...
Creating virtual environment...
Installing Python packages...
Had a problem while installing Python packages:
Collecting argparse==1.4.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 5))
Downloading argparse-1.4.0-py2.py3-none-any.whl
Collecting pycparser==2.14 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 11))
Downloading pycparser-2.14.tar.gz (223kB)
Collecting cffi==1.4.2 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 14))
Downloading cffi-1.4.2.tar.gz (365kB)
Collecting ConfigArgParse==0.10.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 31))
Downloading ConfigArgParse-0.10.0.tar.gz
Collecting configobj==5.0.6 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 33))
Downloading configobj-5.0.6.tar.gz
Collecting cryptography==1.2.3 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 35))
Downloading cryptography-1.2.3.tar.gz (373kB)
Collecting enum34==1.1.2 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 57))
Downloading enum34-1.1.2.tar.gz (46kB)
Collecting funcsigs==0.4 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 60))
Downloading funcsigs-0.4-py2.py3-none-any.whl
Collecting idna==2.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 63))
Downloading idna-2.0-py2.py3-none-any.whl (61kB)
Collecting ipaddress==1.0.16 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 66))
Downloading ipaddress-1.0.16-py27-none-any.whl
Collecting linecache2==1.0.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 69))
Downloading linecache2-1.0.0-py2.py3-none-any.whl
Collecting ndg-httpsclient==0.4.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 72))
Downloading ndg_httpsclient-0.4.0.tar.gz
Collecting ordereddict==1.1 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 74))
Downloading ordereddict-1.1.tar.gz
Collecting parsedatetime==2.1 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 76))
Downloading parsedatetime-2.1-py2-none-any.whl
Collecting pbr==1.8.1 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 79))
Downloading pbr-1.8.1-py2.py3-none-any.whl (89kB)
Collecting psutil==3.3.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 82))
Downloading psutil-3.3.0.tar.gz (261kB)
Collecting pyasn1==0.1.9 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 104))
Downloading pyasn1-0.1.9-py2.py3-none-any.whl
Collecting pyOpenSSL==0.15.1 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 116))
Downloading pyOpenSSL-0.15.1-py2.py3-none-any.whl (102kB)
Collecting pyRFC3339==1.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 119))
Downloading pyRFC3339-1.0-py2.py3-none-any.whl
Collecting python-augeas==0.5.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 122))
Downloading python-augeas-0.5.0.tar.gz (90kB)
Collecting python2-pythondialog==3.3.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 124))
Downloading python2-pythondialog-3.3.0.tar.bz2 (1.8MB)
Collecting pytz==2015.7 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 127))
Downloading pytz-2015.7-py2.py3-none-any.whl (476kB)
Collecting requests==2.9.1 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 141))
Downloading requests-2.9.1-py2.py3-none-any.whl (501kB)
Collecting six==1.10.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 144))
Downloading six-1.10.0-py2.py3-none-any.whl
Collecting traceback2==1.4.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 147))
Downloading traceback2-1.4.0-py2.py3-none-any.whl
Collecting unittest2==1.1.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 150))
Downloading unittest2-1.1.0-py2.py3-none-any.whl (96kB)
Collecting zope.component==4.2.2 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 153))
Downloading zope.component-4.2.2.tar.gz (546kB)
Collecting zope.event==4.1.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 155))
Downloading zope.event-4.1.0.tar.gz (476kB)
Collecting zope.interface==4.1.3 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 157))
Downloading zope.interface-4.1.3.tar.gz (141kB)
Collecting mock==1.0.1 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 175))
Downloading mock-1.0.1.tar.gz (818kB)
Collecting acme==0.5.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 181))
Downloading acme-0.5.0-py2.py3-none-any.whl (91kB)
Collecting letsencrypt==0.5.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 184))
Downloading letsencrypt-0.5.0-py2-none-any.whl (208kB)
Collecting letsencrypt-apache==0.5.0 (from -r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 187))
Downloading letsencrypt_apache-0.5.0-py2-none-any.whl (100kB)
Requirement already satisfied (use --upgrade to upgrade): setuptools>=1.0 in /home/sebastian/.local/share/letsencrypt/lib/python2.7/site-packages (from cryptography==1.2.3->-r /tmp/tmp.ztemUjrFMS/letsencrypt-auto-requirements.txt (line 35))
Installing collected packages: argparse, pycparser, cffi, ConfigArgParse, six, configobj, idna, pyasn1, enum34, ipaddress, cryptography, funcsigs, linecache2, pyOpenSSL, ndg-httpsclient, ordereddict, parsedatetime, pbr, psutil, pytz, pyRFC3339, python-augeas, python2-pythondialog, requests, traceback2, unittest2, zope.interface, zope.event, zope.component, mock, acme, letsencrypt, letsencrypt-apache
Found existing installation: argparse 1.2.1
Not uninstalling argparse at /usr/lib/python2.7, outside environment /home/sebastian/.local/share/letsencrypt
Running setup.py install for pycparser: started
Running setup.py install for pycparser: finished with status 'done'
Running setup.py install for cffi: started
Running setup.py install for cffi: finished with status 'done'
Running setup.py install for ConfigArgParse: started
Running setup.py install for ConfigArgParse: finished with status 'done'
Running setup.py install for configobj: started
Running setup.py install for configobj: finished with status 'done'
Running setup.py install for enum34: started
Running setup.py install for enum34: finished with status 'done'
Running setup.py install for cryptography: started
Running setup.py install for cryptography: still running...
Running setup.py install for cryptography: finished with status 'done'
Running setup.py install for ndg-httpsclient: started
Running setup.py install for ndg-httpsclient: finished with status 'done'
Running setup.py install for ordereddict: started
Running setup.py install for ordereddict: finished with status 'done'
Running setup.py install for psutil: started
Running setup.py install for psutil: finished with status 'error'
Complete output from command /home/sebastian/.local/share/letsencrypt/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-PU8zkR/psutil/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('
', '
'), __file__, 'exec'))" install --record /tmp/pip-ulwIP3-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/sebastian/.local/share/letsencrypt/include/site/python2.7/psutil:
running install
running build
running build_py
creating build
creating build/lib.linux-armv7l-2.7
creating build/lib.linux-armv7l-2.7/psutil
copying psutil/_pswindows.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_common.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/__init__.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_pslinux.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_psposix.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_psbsd.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_psosx.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_compat.py -> build/lib.linux-armv7l-2.7/psutil
copying psutil/_pssunos.py -> build/lib.linux-armv7l-2.7/psutil
running build_ext
building 'psutil._psutil_linux' extension
creating build/temp.linux-armv7l-2.7
creating build/temp.linux-armv7l-2.7/psutil
arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DPSUTIL_VERSION=330 -I/usr/include/python2.7 -c psutil/_psutil_linux.c -o build/temp.linux-armv7l-2.7/psutil/_psutil_linux.o
In file included from psutil/_psutil_linux.c:24:0:
/usr/include/linux/sockios.h:1:1: error: expected identifier or ‘(’ before ‘/’ token
/
^
/usr/include/linux/sockios.h:4:2: error: stray ‘�’ in program
* oxe�ating system. INET is imp,emented using the BSD Socket
^
/usr/include/linux/sockios.h:5:2: error: stray ‘�’ in program
* inuer&�ce as the means mf cnmmUnication with2the$uceR levdl.
^
/usr/include/linux/sockios.h:7:2: error: stray ‘�’ in program
*) Definhtiofc of The sogket-leV�h I/O cmntroL caLlw.
^
/usr/include/linux/sockios.h:8:1: error: stray ‘�’ in program
�*
^
/usr/include/linux/sockios.h:9:2: error: stray ‘`’ in program
*`Ver�ion: @,#)sockios.h 1.0.2 07/09/93
^
/usr/include/linux/sockios.h:9:2: error: stray ‘�’ in program
/usr/include/linux/sockios.h:9:13: error: stray ‘@’ in program
*`Ver�ion: @,#)sockios.h 1.0.2 07/09/93
^
/usr/include/linux/sockios.h:9:15: error: stray ‘#’ in program
*`Ver�ion: @,#)sockios.h 1.0.2 07/09/93
^
/usr/include/linux/sockios.h:9:27: error: too many decimal points in number
*`Ver�ion: @,#)sockios.h 1.0.2 07/09/93
^
/usr/include/linux/sockios.h:9:36: error: invalid digit "9" in octal constant
*`Ver�ion: @,#)sockios.h 1.0.2 07/09/93
^
/usr/include/linux/sockios.h:10:1: error: stray ‘�’ in program
$** * Auth�rs; Ross Biro
^
/usr/include/linux/sockios.h:10:16: error: unknown type name ‘Ross’
$** * Auth�rs; Ross Biro
^
/usr/include/linux/sockios.h:11:2: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
* Bred N. van Kempen,$<wa
tje@uWalt.NL.Eueneu.OSG>
^
/usr/include/linux/sockios.h:11:32: error: stray ‘@’ in program
* Bred N. van Kempen,$<wa
tje@uWalt.NL.Eueneu.OSG>
^
/usr/include/linux/sockios.h:12:2: error: stray ‘�’ in program
+�
^
/usr/include/linux/sockios.h:13:2: error: stray ’ in program
This�program")s$free software; you cen redistsibu4e it andor
^
/usr/include/linux/sockios.h:13:2: error: stray ‘�’ in program
/usr/include/linux/sockios.h:13:2: error: missing terminating " character
/usr/include/linux/sockios.h:14:1: error: missing terminating " character
"* moDify i� }nde� the terms of dhe GNU0Ggneral Public L9gunse
^
/usr/include/linux/sockios.h:15:2: error: stray ‘�’ in program
as$pujlish%d by the Free Softvare Foundation; either Version
^
/usr/include/linux/sockios.h:16:47: error: unknown type name ‘either’
!* 6 of tle`License, or (at 9mur nptiOn)$any later`version.
^
/usr/include/linux/sockios.h:17:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘!’ token
*
^
/usr/include/linux/sockios.h:17:1: error: stray ‘`’ in program
/usr/include/linux/sockios.h:17:30: error: invalid suffix "mur" on integer constant
*
^
/usr/include/linux/sockios.h:17:1: error: stray ‘`’ in program
*
^
/usr/include/linux/sockios.h:18:2: error: stray ‘’ in program
'iffdff �LINUX_Q�KIOS_H
^
/usr/include/linux/sockios.h:19:1: error: missing terminating ' character
#dufyne _LINUZ_SOCOIOS_H
^
/usr/include/linux/sockios.h:20:2: error: invalid preprocessing directive #dufyne
^
/usr/include/linux/sockios.h:22:2: error: invalid preprocessing directive #inclu
J/
^
/usr/include/linux/sockios.h:24:2: error: stray ‘�’ in program
#define$SIOCINQ FIONSEAD
^
/usr/include/linux/sockios.h:25:2: error: invalid preprocessing directive #define$SIOCINQ
#def)ne SIO�OUTQ T�OCOUTQ /* gu�p�t!qugue siXe (not sent + not acked) */
^
/usr/include/linux/sockios.h:26:2: error: invalid preprocessing directive #def
^
/usr/include/linux/sockios.h:29:2: error: invalid preprocessing directive #t
#define SIO�DELRT 0x890C /* delEte routing tabde entry
^
/usr/include/linux/sockios.h:151:2: error: #endif without #if
In file included from /usr/include/linux/if.h:23:0,
from psutil/_psutil_linux.c:25:
/usr/include/linux/socket.h:14:2: error: unknown type name ‘__kernel_sa_family_t’
__kernel_sa_family_t ss_family; /* address family */
^
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
----------------------------------------
Command "/home/sebastian/.local/share/letsencrypt/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-PU8zkR/psutil/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('
', '
'), __file__, 'exec'))" install --record /tmp/pip-ulwIP3-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/sebastian/.local/share/letsencrypt/include/site/python2.7/psutil" failed with error code 1 in /tmp/pip-build-PU8zkR/psutil
You are using pip version 8.0.3, however version 8.1.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
只要修改了 PIP 的源就可以了
vim ~/.pip/pip.conf
[global]
index-url = http://mirrors.aliyun.com/pypi/simple/
[install]
trusted-host=mirrors.aliyun.com
4144
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
