4507配置:

interface Port-channel3
 switchport
 switchport trunk encapsulation dot1q
 switchport mode trunk
!
interface GigabitEthernet3/3
 description For 4503-G2/3
 channel-group 3 mode auto
!
interface GigabitEthernet3/4
 description For 4503-G2/4
 channel-group 3 mode auto

 

interface Vlan1
 ip address 10.140.192.253 255.255.255.0
 standby 1 ip 10.140.192.254
 standby 1 priority 110
 standby 1 preempt

 

interface Vlan10
 ip address 10.140.193.253 255.255.255.0
 standby 10 ip 10.140.193.254
 standby 10 priority 110
 standby 10 preempt

 

生成树优先级:

spanning-tree mode pvst

spanning-tree vlan 1-4094 priority 4096

 

4503配置:

interface Port-channel3
 switchport
 switchport trunk encapsulation dot1q
 switchport mode trunk

 

interface GigabitEthernet2/3
 description For 4507
 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 3 mode auto
!
interface GigabitEthernet2/4
 description For 4507
 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 3 mode auto

 

interface Vlan1
 ip address 10.140.192.252 255.255.255.0
 no ip redirects
 standby 1 ip 10.140.192.254
!
interface Vlan10
 ip address 10.140.193.252 255.255.255.0
 no ip redirects
 standby 10 ip 10.140.193.254

 

这样配置完以后，show standby bri失败,sh int port-channel 20 is down.

解决办法是不要先create Port-channel3，要先在4507和4503的interface端口interface GigabitEthernet3/3下面配置channel-group 3 mode auto，然后会自动建立channel-group 3，然后interface Port-channel3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk

这样就OK了！