usb转串口 linux hub,USB转串口之minicom的设置

在linux下，用minicom作为终端连接ARM开发板。由于电脑没有串口，需要用usb转串口

首先接上usb转串口，在终端输入：

lsusb查看信息：

crazyleen@crazyleen-desktop:/dev$ lsusb

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

其中这个Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port就是我的usb转串口器

然后查看器驱动： ls /dev/ttyUSB*

crazyleen@crazyleen-desktop:/dev$ ls /dev/ttyUSB*

/dev/ttyUSB0

我的串口设备文件就是/dev/ttyUSB0

接下来设置minicom

提示：安装minicom：sudo apt-get install minicom

输入：sudo minicom

Welcome to minicom 2.4

OPTIONS: I18n

Compiled on Jan 25 2010, 06:49:09.

Port /dev/tty8

Press CTRL-A Z for help on special keys

按   TCRL+A，然后按下Z

Welco+-------------------------------------------------------------------+

|                     Minicom Command Summary                       |

OPTIO|                                                                   |

Compi|          Commands can be called by CTRL-A |

Port |                                                                   |

|               Main Functions                  Other Functions     |

Press|                                                                   |

| Dialing directory..D  run script (Go)....G | Clear Screen.......C |

| Send files.........S  Receive files......R | cOnfigure Minicom..O |

| comm Parameters....P  Add linefeed.......A | Suspend minicom....J |

| Capture on/off.....L  Hangup.............H | eXit and reset.....X |

| send break.........F  initialize Modem...M | Quit with no reset.Q |

| Terminal settings..T  run Kermit.........K | Cursor key mode....I |

| lineWrap on/off....W  local Echo on/off..E | Help screen........Z |

| Paste file.........Y                       | scroll Back........B |

|                                                                   |

|      Select function or press Enter for none.                     |

|                                                                   |

|             Written by Miquel van Smoorenburg 1991-1995           |

|             Some additions by Jukka Lahtinen 1997-2000            |

|             i18n by Arnaldo Carvalho de Melo 1998

按下o选择设置串口通讯

Welcome to minicom 2.4

OPTIONS: I18n

Compiled on Jan 25 2010, 06:49:09.

Port /dev/tty8

Press CTRL-A Z for help on special keys

+-----[configuration]------+

| Filenames and paths      |

| File transfer protocols  |

| Serial port setup        |

| Modem and dialing        |

| Screen and keyboard      |

| Save setup as dfl        |

| Save setup as..          |

| Exit                     |

+--------------------------+

选择| Serial port setup

Welcome to minicom 2.4

OPTI+-----------------------------------------------------------------------+

Comp| A -    Serial Device      : /dev/tty8                                 |

Port| B - Lockfile Location     : /var/lock                                 |

| C -   Callin Program      :                                           |

Pres| D -  Callout Program      :                                           |

| E -    Bps/Par/Bits       : 115200 8N1                                |

| F - Hardware Flow Control : Yes                                       |

| G - Software Flow Control : No                                        |

|                                                                       |

|    Change which setting?                                              |

+-----------------------------------------------------------------------+

| Screen and keyboard      |

| Save setup as dfl        |

| Save setup as..          |

| Exit                     |

+--------------------------+

按下A设置设备：/dev/ttyUSB0，按下F关闭flow control

然后保存成dft，就退出

ok，设置完毕

minicom  参数

minicom -D /dev/ttyS0 -b 57600 -8 -c on