ds18b20驱动程序Linux,Linux ds18b20驱动程序带CRC校验

#include /* copy_*_user() */

#define DS1820_CMD_SKIP_ROM(0xCC)

#define DS1820_CMD_CONVERT(0x44)

#define DS1820_CMD_READSCR(0xBE)

#define DS1820_DQ S5PV210_GPH3(0)

#define make_dq_out() s3c_gpio_cfgpin(DS1820_DQ,S3C_GPIO_SFN(1))

#define make_dq_in() s3c_gpio_cfgpin(DS1820_DQ,S3C_GPIO_SFN(0))

#define set_dq(_val)gpio_set_value(DS1820_DQ, _val)

#define get_dq() gpio_get_value(DS1820_DQ)

//#define dq_pullup(_val) s3c2410_gpio_pullup(DS1820_DQ, _val)

#define DS1820_DEV_NAME "ds18b20"

static u8 w1_crc8_table[] = {

0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,

157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,

35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98,

190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255,

70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7,

219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154,

101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36,

248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185,

140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205,

17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80,

175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238,

50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115,

202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139,

87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22,

233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168,

116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53

};

struct ds1820_device

{

struct mutex res_mutex;

struct cdev cdev;

};

static int ds1820_major = 0;

static struct ds1820_device *ds1820_devp;

static struct class *my_class;

#define ds1820_existed() ds1820_reset()

static unsigned int ds1820_reset(void)

{

unsigned int ret;

make_dq_out();

//dq_pullup(0);//we use a external 4.7K pullup resistor

set_dq(0);//set dq low to info slave

udelay(500);//hold for 480~960us

set_dq(1);//release dq

make_dq_in();

udelay(60);//wait for 60us, ds1820 will hold dq low for 240us

ret = ~get_dq();//ds1820 pulldown dq

udelay(240);

//msleep(1);

return ret;

}

static void ds1820_write_byte(unsigned char byte)

{

unsigned int i;

make_dq_out();

for (i = 8; i != 0; --i) {

set_dq(0)