- 显示正在探测文件系统
- 没有将挂载的分区卸载
- 解决:sudo umount -l /isodevice
- N卡驱动直接通过cuda安装
- https://blog.csdn.net/Ansel_Lee/article/details/79552834
- RUFUS 制作启动盘
- 可以选择分区方案和类型
- 确保secure boot 已经关闭
- 选择U盘进行安装
- 如果卡在logo界面
- 进入grub界面,选择ubuntu,同样,按e进入编辑模式,找到quiet splash,在后面空格接着输入$vt_handoff acpi_osi=linux nomodeset
- 若出现没有找到媒体
- 换成其他刻录工具如软碟通吧- GRUB界面,选中acpi =off- 此处为关闭电源高级选项
- 进入liveUSB- 打开GParted,创建一个EFI分区
- 大小:>100M
- 格式:FAT32
- flags:boot
- 安装完成重启后无引导
- 使用boot-repair高级选项
- 参考:
- Converting Ubuntu into UEFI mode
Note: Do not follow this procedure if your computer is already booting correctly. Use this procedure only if you believe you've accidentally installed Ubuntu in BIOS/CSM/legacy mode and you want it to boot in UEFI/UEFI mode.
- Start Boot-Repair, click on "Advanced options", go to the "GRUB location" tab.
- If you do not see a "Separate /boot/efi partition" line, this means that your PC does not have any UEFI partition. In this case, exit Boot-Repair, then create an UEFI partition (see the "Creating an UEFI partition" paragraph above).
- If you see a "Separate /boot/efi partition" line, tick it then click the "Apply" button.
- Set up your BIOS so that it boots the HDD in UEFI mode (see the ""Set up the BIOS in UEFI or Legacy mode" paragraph above).