linux设置串口奇偶检验,stm32串口使用奇偶校验程序配置

STM32微控制器参考手册 2009年2月 英文版

P613页

校验位说明：

Table 155. Frame formats

M bit PCE bit USART frame

0 0 | SB | 8 bit data | STB |

0 1 | SB | 7-bit data | PB | STB |

1 0 | SB | 9-bit data | STB |

1 1 | SB | 8-bit data PB | STB

配置方式：STM32标准库 V3.01

#ifdef USART1_ON

//允许USART1的时钟

RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);

USART_InitStructure.USART_BaudRate = BAUD1;

USART_InitStructure.USART_WordLength = USART_WordLength_9b;  //此处在有奇偶校验时需要9个数据位，无奇偶校验时8个数据位

USART_InitStructure.USART_StopBits = USART_StopBits_1;

USART_InitStructure.USART_Parity = USART_Parity_Even;//偶校验

USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;

USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;

USART_Init(USART1,&USART_InitStructure);

/* 允许USART1 DMA */

#ifdef USART1_DMA_ON

USART_DMACmd(USART1,USART_DMAReq_Rx | USART_DMAReq_Tx, ENABLE);

#endif

/*允许USART1 */

USART_Cmd(USART1,ENABLE);

#endif