Group
Element
Tag Description
中文解释
VR
0008
0008
Image Type:
Image identification characteristics.
CS
0008
0018
SOP Instance UID
SOP实例UID.
0008
0023
Content Date:
The date the image pixel data creation started.
影像拍摄的日期.
DA
0008
0033
Content Time
影像拍摄的时间.
TM
0020
0013
Image/Instance Number:
A number that identifies this image.
图像码:
辨识图像的号码.
IS
0028
0002
Samples Per Pixel:
Number of samples (planes) in this image.
图像上的采样率.
US
0028
0004
Photometric Interpretation:
Specifies the intended interpretation of the pixel data.
光度计的解释,对于CT图像,用两个枚举值
MONOCHROME1,MONOCHROME2.
用来判断图像是否是彩色的,
MONOCHROME1/2是灰度图,
RGB则是真彩色图,还有其他.
CS
0028
0010
Rows: Number of rows in the image.
图像的总行数,行分辨率.
US
0028
0011
Columns: Number of columns in the image.
图像的总列数,列分辨率.
US
0028
0030
Pixel Spacing:
Physical distance in the patient between the center of each pixel.
像素间距.
像素中心之间的物理间距.
DS
0028
0100
Bits Allocated:
Number of bits allocated for each pixel sample. Each sample shall have the same number of bits allocated.
分配的位数:
存储每一个像素值时分配的位数,每一个样本应该拥有相同的这个值.
US
0028
0101
Bits Stored:
Number of bits stored for each pixel sample. Each sample shall have the same number of bits stored.
存储的位数:有12到16列举值.
存储每一个像素用的位数.每一个样本应该有相同值.
US
0028
0102
High Bit:
Most significant bit for pixel sample data. Each sample shall have the same high bit.
高位.
US
0028
0103
Pixel Representation:
Data representation of the pixel samples. Each sample shall have the same pixel representation.
Enum: 0000H=unsigned integer,
0001H=2’s complement.
像素数据的表现类型:
这是一个枚举值,分别为十六进制数0000和0001.
0000H =无符号整数,
0001H = 2的补码.
US
0028
1050
Window Center
窗位.
DS
0028
1051
Window Width
窗宽.
DS
0028
1052
Rescale Intercept:
The value b in relationship between stored values (SV) and the output units.
Output units = m*SV + b.
Required if Modality LUT Sequence (0028, 0030) is not present.
截距:
如果表明不同模态的LUT颜色对应表不存在时,则使用方程
Units = m*SV + b,计算真实的像素值到呈现像素值。
其中这个值为表达式中的b。
DS
0028
1053
Rescale Slope:
m in the equation specified by Rescale Intercept (0028,1052).
Required if Rescale Intercept is present.
斜率.
这个值为表达式中的m。
DS
0028
1054
Rescale Type:
Specifies the output units of Rescale Slope (0028,1053) and Rescale Intercept (0028,1052).
Enum: US=Unspecified Requried if Photometric Interpretation is MONOCHROME2, and Bits Stored is greater than 1.
This specifies an identity Modality LUT transformation.
输出值的单位.
这是一个枚举值,
LO