linux on zfs,在zfsonlinux中增长zpool

我有2x3TB磁盘与GPT和zpool在第一个磁盘(sda4)上使用2.7TB分区,在第二个磁盘(sdb4)上使用1TB.

原因是最初两个磁盘只有1TB,我依次用3TB替换它们.但是在我有1x1TB和1x3TB的时候,我将3TB的剩余部分用于我想要删除的不同分区.

我在Linux上使用最新的ZFS(0.6.5.7-8-wheezy).将池大小调整为2.7TB的正确方法是什么？

autoresize目前已关闭.这是lsblk和zpool状态的当前输出：

# lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

sda 8:0 0 2,7T 0 disk

├─sda1 8:1 0 1M 0 part

├─sda2 8:2 0 14,5G 0 part

│ └─md0 9:0 0 14,5G 0 raid1 /

├─sda3 8:3 0 4,2G 0 part

│ └─md2 9:2 0 4,2G 0 raid1 [SWAP]

└─sda4 8:4 0 2,7T 0 part

sdb 8:16 0 2,7T 0 disk

├─sdb1 8:17 0 1M 0 part

├─sdb2 8:18 0 14,5G 0 part

│ └─md0 9:0 0 14,5G 0 raid1 /

├─sdb3 8:19 0 4,2G 0 part

│ └─md2 9:2 0 4,2G 0 raid1 [SWAP]

├─sdb4 8:20 0 912,9G 0 part

└─sdb5 8:21 0 1,8T 0 part

# zpool status

pool: zpradix1imain

state: ONLINE

status: Some supported features are not enabled on the pool. The pool can

still be used, but some features are unavailable.

action: Enable all features using 'zpool upgrade'. Once this is done,

the pool may no longer be accessible by software that does not support

the features. See zpool-features(5) for details.

scan: resilvered 687G in 6h2m with 0 errors on Fri Dec 26 18:39:27 2014

config:

NAME STATE READ WRITE CKSUM

zpradix1imain ONLINE 0 0 0

mirror-0 ONLINE 0 0 0

ata-WDC_WD30EZRZ-00WN9B0_WD-WCC4E7CL5U9D-part4 ONLINE 0 0 0

ata-WDC_WD30EZRX-00D8PB0_WD-WMC4N0E6K1AW-part4 ONLINE 0 0 0

作为第一步,我将删除sdb5并将sdb4(通过gdisk)调整为2.7TB并重新扫描分区表(两个磁盘将具有相同的分区布局).

但是之后？