用matlab画可行域,用哪个软件可以作如下可行域图像？要有程序或者方法。

\begin{tikzpicture}[x=1.00mm, y=1.00mm, inner xsep=0pt, inner ysep=0pt, outer xsep=0pt, outer ysep=0pt]

\path[line width=0mm] (-1.12,-1.12) rectangle +(53.91,52.25);

\definecolor{L}{rgb}{0.827,0.827,0.827}

\definecolor{F}{rgb}{0.827,0.827,0.827}

\path[line width=-0.20mm, draw=L, fill=F] (0.00,2.40) .. controls (11.90,10.34) and (35.70,26.20) .. (47.60,34.13) .. controls (47.60,34.13) and (33.32,26.20) .. (25.39,23.03) .. controls (17.45,19.85) and (15.87,21.44) .. (31.73,50.00) .. controls (23.80,38.10) and (7.93,14.30) .. (0.00,2.40) -- cycle;

\definecolor{L}{rgb}{0,0,0}

\path[line width=0.08mm, draw=L] (0.00,2.40) .. controls (11.90,10.34) and (35.70,26.20) .. (47.60,34.13) .. controls (47.60,34.13) and (33.32,26.20) .. (25.39,23.03) .. controls (17.45,19.85) and (15.87,21.44) .. (31.73,50.00) .. controls (23.80,38.10) and (7.93,14.30) .. (0.00,2.40) -- cycle;

\path[line width=0.08mm, draw=L] (0.00,18.27) -- (47.60,18.27);

\path[line width=0.08mm, draw=L] (15.87,50.00) -- (15.87,2.40);

\path[line width=0.08mm, draw=L] (19.83,22.23);

\definecolor{T}{rgb}{0,0,0}

\draw[T] (9.92,12.32) node[anchor=base west]{\fontsize{5.62}{6.75}\selectfont \textcolor[rgb]{0, 0, 0}{R}};

\path[line width=0.08mm, draw=L] (47.60,18.27) -- (47.60,20.25);

\path[line width=0.08mm, draw=L] (31.73,18.27) -- (31.73,20.25);

\path[line width=0.08mm, draw=L] (15.87,34.13) -- (17.85,34.13);

\path[line width=0.08mm, draw=L] (15.87,50.00) -- (17.85,50.00);

\path[line width=0.08mm, draw=L] (0.00,18.27) -- (0.00,20.25);

\path[line width=0.08mm, draw=L] (15.87,2.40) -- (17.85,2.40);

\path[line width=0.08mm, draw=L] (47.60,20.25);

\draw[T] (28.75,16.29) node[anchor=base west]{\fontsize{5.62}{6.75}\selectfont \textcolor[rgb]{0, 0, 0}{Player 1's utility}};

\draw[T] (14.75,31.29) node[anchor=base west,rotate=90]{\fontsize{5.62}{6.75}\selectfont \textcolor[rgb]{0, 0, 0}{Player 2's utility}};

\path[line width=0.08mm, draw=L] (19.83,22.23);

\draw[T] (33.72,48.02) node[anchor=base west]{\fontsize{5.62}{6.75}\selectfont \textcolor[rgb]{0, 0, 0}{(1,2)}};

\draw[T] (47.60,32.15) node[anchor=base west]{\fontsize{5.62}{6.75}\selectfont \textcolor[rgb]{0, 0, 0}{(2,1)}};

\draw(23.00,27.00) node[anchor=base west]{\fontsize{5.62}{6.75}\selectfont $(\frac{1}{4},\frac{1}{4})$};

\path[line width=0.08mm, draw=L] (22.33,27.21) .. controls (21.33,26.21) and (20.14,23.80) .. (20.14,22.80);

\definecolor{F}{rgb}{0,0,0}

\path[line width=0.08mm, draw=L, fill=F] (20.14,22.80) -- (20.51,23.58) -- (20.27,23.42) -- (20.10,23.67) -- (20.14,22.80) -- cycle;

\path[line width=0.08mm, draw=L, fill=F] (19.95,22.33) circle (0.20mm);

\draw[T] (1.98,0.42) node[anchor=base west]{\fontsize{5.62}{6.75}\selectfont \textcolor[rgb]{0, 0, 0}{(-1,-1)}};

\end{tikzpicture}%