英文期刊论文(*为通讯作者)：
1.Xin Xue, Xinyong Wu, Juan Liao*. Hot-cracking susceptibility and shear fracture behavior of dissimilar Ti6Al4V/AA6060 alloys in pulsed Nd:YAG laser welding. Chinese Journal of Aeronautics, 2021, 34(4): 375-386.
2.Wei Zhang, Xin Xue*, Hongbai Bai. Mechanical and electrical properties of Cu-Steel bimetallic porous composite with a double-helix entangled structure. Composite Structures. 2021, 255, 112886
3.Shanshan Chen, Juan Liao*, Hongliang Xiang, Xin Xue, Antonio B. Pereira. Pre-strain effect on twist springback of a 3D P-channel in deep drawing. Journal of Materials Processing Technology, 2021, 287, 116224.
4.Xin Xue, Kai Sun, Mengmeng Tian, Juan Liao*. Analysis of forming-induced distortion of dissimilar Ti6Al4V/AA1050 laminate made by non-equal channel lateral co-extrusion. International Journal of Advanced Manufacturing Technology, 2020, 110:1627–1640
5.Xin Xue, Shixin Ruan, Hongbai Bai, Xiaochao Chen, Yichuan Shao*, Chunhong Lu, An enhanced constitutive model for the nonlinear mechanical behavior of the elastic-porous metal rubber. Mechanics of Materials, 2020, 148, 103447.
6.Xin Xue*, Pei Yang, Yi-chuan Shao, Hong-bai Bai, Manufacture technology and anisotropic behaviour of elastic-porous metal rubber, International Journal of Lightweight Materials and Manufacture, 2020, 3(2), 88-99.
7.Xin Xue*, Shixin Ruan, Angxi Li, Hongbai Bai, Kun Xiao, Nonlinear dynamic modelling of two-Point and symmetrically supported pipeline brackets with elastic-porous metal rubber damper, Symmetry-Basel, 2019, 11, 1479; doi:10.3390/sym11121479
8.Pei Yang, Hongbai Bai, Xin Xue*, Kun Xiao, Xu Zhao, Vibration reliability characterization and damping capability of annular periodic metal rubber in the non-molding direction, Mechanical Systems and Signal Processing. 2019,132: 622–639.
9.Xin Xue, António Pereira*, Gabriela Vincze, Xinyong Wu and Juan Liao. Interfacial characteristics of dissimilar Ti6Al4V/AA6060 lap joint by pulsed Nd:YAG laser welding. Metals, 2019, 9, 71; doi:10.3390/met9010071
10.Kun Xiao, Hongbai Bai, Xin Xue*, Yiwan Wu. Damping characteristics of metal rubber in the pipeline coating system. Shock and Vibration, Volume 2018, Article ID 3974381
11.Xin Xue, Gabriela Vincze, Antonio B. Pereira, Jianyi Pan, Juan Liao. Assessment of metal flow balance in multi-output porthole hot extrusion of AA6060 thin-walled profile.Metals,2018, 8, 462.
12.Jianyi Pan*, Xin Xue. Numerical investigation of an arc inlet structure extrusion die for large hollow sections. International Journal of Material Forming, 2018, 11: 405–416.
13.Kenan Wu, Hongbai Bai, Xin Xue*, Tuo Li and Min Li. Energy dissipation characteristics and dynamic modeling of the coated damping structure for metal rubber of bellows. Metals,2018, 8, 562.
14.Xin Xue, Juan Liao*, Gabriela Vincze, António B. Pereira. Control strategy of twist springback for aluminium alloy hybrid thin-walled tube after mandrel-rotary draw bending. International Journal of Material Forming, 2018, 11,311-323
15.Xin Xue, Antonio B. Pereira, Jose Amorim, Juan Liao*. Effects of pulsed Nd:YAG laser welding parameters on penetration and microstructure characterization of a DP1000 steel butt joint. Metals2017, 7, 292.
16.Juan Liao,Xin Xue*, Myoung-Gyu Lee**, Frédéric Barlat, Gabriela Vincze, António B. Pereira. Constitutive modeling for path-dependent behaviour and its influence on twist springback. International Journal of Plasticity, 2017, 93: 64-88.
17.Xin Xue, Juan Liao, Gabriela Vincze, Frederic Barlat. Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing. International Journal of Material Forming, 2017, 10, 267-278.
18.J. Liao, J. A. Sousa, A. B. Augusto, X. Xue, F. Barlat, A.B. Pereira. Mechanical, microstructural behavior and modeling of dual phase steels under complex deformation paths. International Journal of Plasticity, 2017, 93：269-290.
19.Xin Xue, Juan. Liao, Gabriela. Vincze, António B. Pereira, Frederic Barlat. Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction.International Journal of Mechanical Sciences,2016,117: pp1-15.
20.X. Xue, J. Liao, G. Vincze, J. A. Sousa, F. Barlat, J. Gracio. Modeling and sensitivity analysis of twist springback in deep drawing of dual phase steel. Materials & Design, 2016, 90, pp204-217.
21.X. Xue, J. Liao, G. Vincze, J. Gracio. Modelling of mandrel rotary draw bending for accurate twist springback prediction of an asymmetric thin-walled tube.Journal of Materials Processing Technology,2015, 216, pp405-417.
22.Juan Liao*, Xin Xue, Myoung-Gyu Lee, Frederic Barlat, Jose Gracio. On twist springback prediction of asymmetric tube in rotary draw bending with different constitutive models. International Journal of Mechanical Sciences, 2014, 89, pp311-322.
23.Juan Liao,Xin Xue, Chi Zhou, Frederic Barlat and Jose Gracio. A semi-analytic model to predict and compensate springback in the 3D stretch bending process.Steel Research International, 2014, V85(4), pp697-709.
24.Juan Liao,Xin Xue, Chi Zhou, Frederic Barlat and Jose Gracio. A springback compensation strategy and applications to bending cases. Steel Research International, 2013, V84(5): pp463-472.
中文核心期刊论文(*为通讯作者)：
1.廖娟, 刘建华, 张丽霞, 薛新*.镁合金温渐进成形零件橘皮纹分析[J]. 中南大学学报(自然科学版)，已录用待刊(EI)
2.孙 凯，薛新*. 钛铝复合板横向共挤压翘曲变形分析[J]. 锻压技术，2021，46(3):56-63
3.廖 娟，陈珊珊，薛新*，向红亮. DP钢板应变路径多步演变下的弹塑性力学行为[J]. 固体力学学报，2021，42(1)：94-106.
4.薛新*，阮仕鑫，白鸿柏. 基于等效阻尼理论的金属橡胶弹性迟滞力学模型及实验研究[J]. 实验力学，2020，36(1): 80-90
5.李 敏，白鸿柏，薛新*. 波纹管金属橡胶包覆结构非线性阻尼特性研究[J]. 振动与冲击, 2020, 39(22): 119-127 (EI)
6.沈国鉴，李敏，薛新*. 金属波纹管流固耦合动态特性分析与实验研究[J]. 兵器材料科学与工程，2020, 43(5): 36-42.
7.王珊珊，薛新*，白鸿柏，路纯红. 多孔缠绕金属橡胶夹芯复合板三点弯曲力学行为[J]. 兵器材料科学与工程，2020，43(3): 114-121
8.孙凯，薛新*.钛铝复合板非等通道横向共挤压工艺优化[J]. 精密成形工程，2020，12(2):23-30.
9.杨 佩，白鸿柏，薛新*，赵旭. 激振力对金属橡胶组合减振器振动特性的影响[J]. 兵器材料科学与工程，2019，42(5): 40-46.
10.李 拓，白鸿柏，薛新，吴乙万. 高温环境下编织－嵌槽型金属橡胶的疲劳特性分析[J]. 中国机械工程，2019,30(9): 1009-1017. (EI)
11.肖坤，白鸿柏，薛新*，吴乙万. 金属橡胶包覆管路阻尼结构减振性能研究[J]. 振动与冲击，2019，38(23):239-245. (EI)
12.肖 坤，白鸿柏，薛新*，吴乙万. 金属橡胶包覆阻尼结构的高温耗能特性[J]. 机械工程材料, 2019, 43(9): 28-32.
13.肖 坤，白鸿柏， 薛新*，吴乙万. 高温管路包覆金属橡胶耗能特性及参数识别[J]. 兵器材料科学与工程, 2019, 42(1),11-17.
14.薛新，廖 娟*. 屈服准则对DC05钢板十字拉深变形预测的评价[J]. 塑性工程学报，2018, 25(4), 217-224.
15.薛新，廖 娟*. DP钢板非线性滞弹性力学行为及对回弹预测的应用研究[J]. 塑性工程学报，2018, 25(2), 234-239.
16.吴新勇，廖 娟*，薛新，詹艳然.钛/铝异种合金脉冲激光焊接接头裂纹产生机理[J]. 精密成形工程，2018, 10(6), 95-101.
17.刘 强,阮 锋,薛新,周 驰.三维非规则冲压件的回弹扭转补偿控制.华南理工大学学报(自然科学版). 2009, 37(9): 93-97.
会议论文(口头报告)：
1.薛新. 金属橡胶弹性多孔材料成形制备、性能表征及减隔振应用研究. 2021军民两用降噪减振吸能新材料与技术论坛邀请报告，江苏扬州，2021.1.21..
1.薛新. 金属橡胶复合材料成形制备、性能表征及工程应用研究. 2020年第十四届泛珠三角塑性工程(锻压)学术年会邀请报告，江西南昌，2020.12.04.
2.Xin Xue*, Pei Yang, Yi-chuan Shao, Hong-bai Bai, Manufacture technology and anisotropic behaviour of elastic-porous metal rubber. International Conference on Lightweight Materials and Manufacturing (LMM2019), 9-12 October 2019, Changsha, China. (最佳论文奖)
3.薛新，白鸿柏，吴克南，李敏. 波纹管金属橡胶阻尼包覆结构耗能特性与动力学建模. 2018年全国固体力学学术会议，2018.11.23-25，哈尔滨。
4.X. Xue,G. Vincze, A. B. Pereira, J. Liao, J.Y. Pan. Role of die structures on metal flow balance in multi-output porthole extrusion of thin-walled profile. 17th International Conference on Metal Forming,Metal Forming 2018, 16-19 September 2018, Toyohashi, Japan (CPCI收录)
5.X. Xue,A. B. Pereira, G. Vincze, J. Amorim and J. Liao. Micro-hardness characteristics of DP1000 steel butt joint by pulsed Nd: YAG laser welding. 7th International Conference on Welding Science and Engineering (WSE & CAWE 2017). Oct. 18-20, Jinan, China.
6.X. Xue, J. Liao, G. Vincze, A. B. Pereira. Experimental validation of numerical model for asymmetric deep drawing of DP780 steel sheet using digital image correlation. The 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2016). Sep.4-9, Bristol, UK. Journal of Physics: Conference Series. (EI收录)
7.Xin Xue, Juan Liao, Gabriela Vincze, António B. Pereira. Control strategy of twist springback for an asymmetric thin-walled tube subjected to rotary draw bending. Proceeding of First International Conference and Workshop on Mechanical Engineering Research (RTME2016), pp77-82. 11-13th July 2016, Aveiro, Portugal.
8.Xin Xue, Juan Liao and Gabriela Vincze. Assessment of Anisotropic Yield Criterion for Strain Prediction in Non-axisymmetric Deep Drawing of Dual-phase Steel. Proceeding of International Conference of Advanced High Strength Steel and Press Hardening (ICHSU2015), pp365-370. Oct. 15-18, 2015, Changsha, China.
9.Xin Xue, Gabriela Vincze, Jianyi Pan, Juan Liao, Antonio Pereira, Joaquim Damas. Thermo-mechanical modeling of porthole hot extrusion for a thin-walled hollow aluminum profile. Proceedings of 2015 International Conference on Computing Techniques and Mechanical Engineering (ICCTME2015), pp44-48. Oct. 01-03, Phuket, Thailand.
10.Juan Liao, Xue Xin*, Experimental investigation of deep drawing of C-rail benchmark using various lubricants. MATEC Web of Conferences, v21, 2015, 04011, The 4th International Conference on New Forming Technology (ICNFT2015), Aug. 6-9th. Glasgow, Scotland, UK(EI收录)
11.Xin Xue, Juan Liao, Gabriela Vincze. Benchmark report: Strain Prediction Benchmark – Cross Die (DC05), the 8th Forming Technology Forum (FTF2015), Benchmark report, July 01st, 2015, Zurich, Switzerland.
12.Xin Xue, Juan Liao, Gabriela Vincze, Frédéric Barlat. Twist springback characteristics in C-rail of dual-phase steel sheet after deep drawing. Proceeding of the 34th International Deep Drawing Research Group (IDDRG2015), pp511-521. 31st May-3rd June, Shanghai, China.
13.X. Xue, J. Liao, G. Vincze, J. Gracio. Twist springback of asymmetric thin-walled tube in mandrel rotary draw bending process. The 11th International Conference on Technology of Plasticity (ICTP2014), 19-24 Oct., Nagoya, Japan. Procedia Engineering, v81, 2177-2183.(EI收录)
14.Xin Xue, Juan Liao, Gabriela Vincze, Jose J Gracio. Optimization of an Asymmetric Thin-walled Tube in Rotary Draw Bending Process. The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2014). Jan.6-10, Melbourne, Australia. AIP Conf. Proc., 1567: 1111-1116. doi: 10.1063/1.4850165. (CPCI收录)
专利(第一发明人)：
1.发明专利. 电磁脉冲焊接金属橡胶阻尼夹芯管装置. NO. 2018103403591
2.发明专利. 金属橡胶阻尼夹芯板放热熔焊接装置及工艺. NO. 201810198206.8
3.发明专利. 管路系统高温双向抗冲击吊架. NO. 201711210661.7
4.发明专利. 一种异种双金属复合板共挤压制备方法. NO. 201710205931.9
5.发明专利. 金属薄板脉冲激光焊接双面气体辅助装置. NO. 201710246303.5
6.实用新型. 平板显示产品底座组件. 专利号ZL201020527898.5
7.实用新型. 圆环件多向载荷试验装置. No. 201920916595.3
8.实用新型. 双金属复合型金属橡胶结构及其制备方法. No. 201910019348. 8
9.实用新型. 可调式双层金属橡胶阻尼减振器及其工作方法. No. 20181512027.3
10.实用新型. 一种水果采摘器. No. 201811187595.0
11.实用新型. 一种轻质柔性管路的减振吊架装置及其成型工艺. No. 2018109272550
12.实用新型. 组合塔式、带内加强肋板的薄壁环状金属橡胶件冲压模具及其工作方法. NO. 2018104683299
13.实用新型. 三向调节式阻尼设备减振器及其工作方法. NO. 2018104606324
14.实用新型. 多层金属橡胶包覆管路装置及其工作方法. NO. 2018102866740
15.实用新型. 基于真空电子束焊接的金属橡胶阻尼夹芯板制备工具. NO. 201921621304.4
16.实用新型. 一种带耐高温金属阻尼夹芯结构的消声器. NO. 201922403095.2
17.实用新型. 一种可变截面的导流装置. NO. 201921643893.6
18.实用新型. 多角度旋转式等离子切割装置. NO. 201921470992.9
1868
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
